|
US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6109.10-2008: Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155
Status: Valid GB/T 6109.10: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6109.10-2008 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155
| Valid |
GB/T 6109.10-2008
|
| GB/T 6109.10-1990 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Enamelled round winding wires--Part 10: Polyester (imide) enamelled round copper wires overcoated with polyamide, class 180
| Obsolete |
GB/T 6109.10-1990
|
PDF similar to GB/T 6109.10-2008
Basic data | Standard ID | GB/T 6109.10-2008 (GB/T6109.10-2008) | | Description (Translated English) | Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155 | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K12 | | Classification of International Standard | 29.060.01 | | Word Count Estimation | 7,751 | | Date of Issue | 2008-04-23 | | Date of Implementation | 2008-12-01 | | Quoted Standard | GB/T 6109.1-2008 | | Adopted Standard | IEC 60317-20-2000, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2008 (total 119) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the polyurethane resin-based paint 155 single solderable enamelled round copper wire requirements. If you can retain the original resin and meets the chemical properties of all the requirements of the enameled wire, the resin can be modified. 155 of the heat stage, which requires a minimum temperature index of 155, a heat shock temperature of at least 175��C. Corresponds to the temperature in Celsius temperature index is not recommended use temperature enameled wire, because it depends on factors including the type of equipment, including a lot of factors. This section provides a nominal conductor diameter range: 1: 0. 018 mm and 0. 800 mm above and below, 2 | GB/T 6109.10-2008: Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Enamelled round winding wire Part 10. Solderable polyurethane enamelled round copper wire, class 155
ICS 29.060.01
K12
National Standards of People's Republic of China
GB/T 6109.10-2008/IEC 60317-20.2000
Enamelled round winding wires
Part 10. 155 solderable polyurethane enamelled round copper wire
(IEC 60317-20.2000, Specificationsforparticulartypesofwinding
wires-Part 20. Solderablepolyurethaneenameledroundcopper
wire, class155, IDT)
Posted 2008-04-23
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Definitions, test methods and appearance General 1
Size 4 1
5 Resistance 1
Elongation 1 6
7 resiliency 1
8 flexibility and adhesion 2
9 Thermal Shock 2
10 Softening 2
11 scratch (conductor nominal diameter 0.250mm and 0.800mm above and below) 2
12 Solvent 2
13 Breakdown Voltage 2
Continuity 2 film 14
15 Temperature index 2
16 anti-freezing agent 3
17 solderable 3
18 thermal bonding 3
19 3 dielectric loss factor
20 transformer oil resistant 3
21 3 Loss
23 pinhole test 3
30 3 Packaging
GB/T 6109.10-2008/IEC 60317-20.2000
Foreword
GB/T 6109 "enamelled round winding wires" is divided into 22 parts.
--- Part 1. General requirements;
--- Part 2. 155 polyester enamelled round copper wire;
--- Part 3. 120 acetal enamelled round copper wire;
--- Part 4. 130 solderable polyurethane enamelled round copper wire;
--- Part 5. 180 polyester enamelled round copper wire;
--- Part 6. 220 Polyimide enamelled round copper wire;
Part --- Article 7. 130L grade polyester enamelled round copper wire;
--- Part 9. 130 polyamide composite solderable polyurethane enamelled round copper wire;
--- Part 10. 155 solderable polyurethane enamelled round copper wire;
--- Part 11. 155 polyamide composite solderable polyurethane enamelled round copper wire;
--- Part 12. 180 polyester or polyamide, polyester enamelled round copper wire;
--- Part 13. 180 solderable polyester-imide enamelled round copper wire;
--- Part 14. Polyamide-imide 200 enamelled round copper wire;
--- Part 15. 130 self-adhesive straight welding polyurethane enamelled round copper wire;
--- Part 16. 155 self-adhesive straight welding polyurethane enamelled round copper wire;
--- Part 17. 180 self-adhesive Solderable polyesterimide enamelled round copper wire;
--- Part 18. 180 self-adhesive polyester enamelled round copper wire;
--- Part 19.200 self-adhesive polyester or polyester-polyamide-imide enamelled round copper wire;
--- Part 20.200 polyester or polyester-polyamide imide enamelled round copper wire;
--- Part 21.200 Polyester - amide - imide enamelled round copper wire;
--- Part 22. 240 aromatic polyimide enamelled round copper wire;
--- Part 23. 180 straight welding polyurethane enamelled round copper wire.
This is Part 10 GB/T 6109's. This section identical with IEC 60317-20.2000 "winding wires Product Standards
Part 20. 155 solderable polyurethane enamelled round copper wire, "Version 2.2 (in English).
For ease of use, this section made the following editorial changes.
--- Deleted international standards foreword;
"." --- With a decimal point instead of a comma as the decimal point, "";
--- According to IEC 60317-0-1.2005 increases the pinhole pilot projects.
This is the first part of the formulation.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized.
This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute.
Participated in the drafting of this section. Rong Sheng AMD Wire Co., Ltd. Zhongshan Prudential enameled wood, Donggang Wire Factory,
Fine Dart Magnet Wire Co., Ltd., Suzhou St. Lee Cable Co., Ltd. Jufeng composite wires.
The main drafters of this section. Liu Guizhong, Lei Jie Yan, Xue Yongbin, Zhang Yan Sheng, Luo Liren, Cai Lin, Chen Hui-min.
GB/T 6109.10-2008/IEC 60317-20.2000
Enamelled round winding wires
Part 10. 155 solderable polyurethane enamelled round copper wire
1 Scope
GB/T 6109 This section provides a single paint polyurethane resin-based 155 solderable enamelled round copper wire requirements. in case
Chemical characteristics of the original can retain the resin and satisfy all the requirements specified in the wire, the resin may be modified.
NOTE. chemically-modified resin is a variation of, or contain one or more additives to improve certain properties of the resin or its usage characteristics.
155 represents the thermal level, which requires a minimum temperature index of 155, a heat shock temperature of at least 175 ℃.
Corresponding to the temperature index temperature in Celsius is not recommended wire temperature, because it depends on the type of equipment used include
Many factors within.
Conductor nominal diameter range specified in this standard are.
--- Level 1. 0.018mm and 0.800mm above and below;
--- Level 2. 0.020mm and 0.800mm above and below.
Nominal press GB/T 6109.1-2008 prescribed in Chapter 4, the diameter of the conductor.
2 Normative references
The following documents contain provisions which, through reference to GB/T 6109 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
Part 1 GB/T 6109.1-2008 enamelled round winding wire. General requirements (IEC 60317-0-1.2005, IDT)
3 Definitions, test methods and General Appearance
3.1 Definitions, test methods - General
Definitions, test methods, see General GB/T 6109.1-2008 Chapter 3.
If GB/T 6109.1-2008 in this section are contradictory to this section shall prevail.
3.2 Appearance
See GB/T 6109.1-2008 in 3.3.
4 Dimensions
See GB/T 6109.1-2008 in Chapter 4.
5 resistance
See GB/T 6109.1-2008 in Chapter 5.
6 Elongation
See GB/T 6109.1-2008 in Chapter 6.
7 resiliency
See GB/T 6109.1-2008 in Chapter 7.
GB/T 6109.10-2008/IEC 60317-20.2000
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6109.10-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 6109.10-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6109.10-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6109.10-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6109.10-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6109.10-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|