HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 6073-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6073-2010: Type LT highly flexible friction clutch
Status: Valid

GB/T 6073: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6073-2010English229 Add to Cart 3 days [Need to translate] Type LT highly flexible friction clutch Valid GB/T 6073-2010
GB/T 6073-1985English359 Add to Cart 3 days [Need to translate] Type LT highly elastic friction clutch Obsolete GB/T 6073-1985

PDF similar to GB/T 6073-2010


Standard similar to GB/T 6073-2010

GB/T 37452   CB/T 4197   GB/T 11865   GB/T 14653   GB/T 14654   GB/T 2496   

Basic data

Standard ID GB/T 6073-2010 (GB/T6073-2010)
Description (Translated English) Type LT highly flexible friction clutch
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard U48
Classification of International Standard 47.020.20
Word Count Estimation 10,173
Date of Issue 2010-08-09
Date of Implementation 2010-12-01
Older Standard (superseded by this standard) GB/T 6073-1985
Quoted Standard GB/T 1348; GB/T 2496; GB/T 4879; GB 5763-1998; GB/T 9239.1-2006; GB/T 778-1986
Regulation (derived from) National Standard Approval Announcement 2010 No.3 (Total No.158)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the working pressure of 0. 7 MPa ~ 0. 8 pneumatic ring with high elastic rubber elasticity MPa double cone dry friction clutch of product categories, requirements, test methods, inspection rules and signs, packaging and storage. This standard applies to the main coaxial connector, driven shaft, has a relative offset compensation and vibration cushioning properties of marine, land used by power unit clutch design, manufacture and acceptance.

GB/T 6073-2010: Type LT highly flexible friction clutch

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Type LT highly flexible friction clutch ICS 47.020.20 U48 National Standards of People's Republic of China Replacing GB/T 6073-1985 LT High elastic friction clutch Issued on. 2010-08-09 2010-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 6073-1985 "LT High elastic friction clutch." This standard and GB/T 6073-1985 compared to major revision changes are as follows. --- Based on the modified mechanical couplings, clutches basic national standards. GB/T 10042-2003 "clutch term" GB/T 10043-2003 "clutch classification", GB/T 2496 "Flexible couplings ring" and make technical corrections; --- Depending on the application, the LT-type high elastic friction clutch part of the performance parameters and dimensions to make appropriate changes; --- The standard "requirements", "test" and "test rules" section has been rewritten. The standard proposed by China Shipbuilding Industry Corporation. This standard by the National Marine Machinery Standardization Technical Committee Sub-Committee on Marine Diesel Engine. This standard was drafted. China Shipbuilding Industry Corporation seventh eleven Institute. The main drafters of this standard. Chun Gong whole, Yan Zhongsheng, often Zhen Luo, Dong Peng, Li Qiang, Zhang Yi Fei, Ji Wen. This standard replaces the standards previously issued as follows. --- GB/T 6073-1985. LT High elastic friction clutch

1 Scope

This standard specifies the operating pressure of 0.7MPa ~ 0.8MPa double cone with high elastic rubber elastic ring pneumatic dry friction clutch Clutch (hereinafter referred to as "LT clutch") product classification, requirements, test methods, inspection rules and signs, packaging and storage. This standard applies to connecting coaxial driving and driven shafts, has a relative offset compensation and vibration cushioning properties of marine, land power unit Set the clutch design, manufacture and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1348 ductile iron (GB/T 1348-2009, ISO 1083.2004, MOD) GB/T 2496 elastic coupling ring GB/T 4879 rust-proof packaging GB 5763-1998 automobile brake linings (neqJISD4411.1993) GB/T 9239.1-2006 mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. specification of tolerance and balance Inspection (ISO 1940.1.2003, IDT) CB/T 778-1986 marine diesel engine forgings technical conditions

3 Classification and Marking

3.1 Product Marking 3.1.1 marking method Model LT provisions clutch is as follows. LT  clutch Code Nominal torque of the code, with the number Nm 1/100 representation 3.1.2 tag example Nominal torque 16000N · m of LT clutch labeled as follows. Clutch GB/T 6073-2010 LT160. 3.2 product model, the main performance parameters, structure and shape and size of installation and connection 3.2.1 LT clutch Model and main performance parameters should meet the requirements of Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6073-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6073-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6073-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6073-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6073-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6073-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.