|
US$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6006.3-2013: Test method for glass mats -- Part 3: Determination of thickness
Status: Valid GB/T 6006.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6006.3-2013 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Test method for glass mats -- Part 3: Determination of thickness
| Valid |
GB/T 6006.3-2013
|
| GB/T 6006.3-2001 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Test method for glass mats -- Part 3: Determination of thickness
| Obsolete |
GB/T 6006.3-2001
|
PDF similar to GB/T 6006.3-2013
Basic data | Standard ID | GB/T 6006.3-2013 (GB/T6006.3-2013) | | Description (Translated English) | Test method for glass mats -- Part 3: Determination of thickness | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q36 | | Classification of International Standard | 59.100.10 | | Word Count Estimation | 8,840 | | Older Standard (superseded by this standard) | GB/T 6006.3-2001 | | Quoted Standard | GB/T 9914.3; ISO 291 | | Adopted Standard | ISO 3616-2001; MOD | | Regulation (derived from) | National Standards Bulletin No. 18 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: the average thickness of the glass fiber mat, load recovery degrees of thickness and pressure series determination. This standard applies to: glass fiber chopped strand mat, continuous strand glass fiber mat. | GB/T 6006.3-2013: Test method for glass mats -- Part 3: Determination of thickness---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for glass mats Part 3.. Determination of thickness
ICS 59.100.10
Q36
National Standards of People's Republic of China
Replacing GB/T 6006.3-2001
Test method for glass fiber mat
Part 3. Determination of thickness
(ISO 3616.2001, Textileglass-Chopped-strand
thicknessunderloadandrecoveryaftercompression, MOD)
Issued on. 2013-09-18
2014-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 6006 "Test method for glass mat" is divided into three parts.
--- Part 1. Determination of the solubility of styrene;
--- Part 2. Determination of breaking tensile strength;
--- Part 3. Determination of thickness.
This section GB/T 6006 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 6006.3-2001 "glass mat Test methods - Part 3. Determination of thickness", and GB/T 6006.3-
Compared to 2001, in addition to editorial changes outside the main technical changes are as follows.
--- "2 Normative references" to remove the GB/T 18374-2001, increasing the GB/T 2918 and GB/T 9914.3
(See Chapter 2, Section 2 of the 2001 edition);
--- Added footnote in 5.7 and 5.8 (see Chapter 5);
--- Steel block B1 by the size of the opening diameter 15mm diameter 10mm modified (see FIG. 3);
--- "9 calculations and results are shown" added Symbol Description (see Chapter 9).
This section uses redrafted law revision using ISO 3616.2001 "Textile glass chopped strand mat and continuous strand mat average thickness
Degree, loading and thickness recovery after compression degree of determination. "
This part of ISO 3616.2001 and the technical differences for the following reasons.
--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. Because the ISO 1886 has been abolished, so deleting
The "Normative references" in ISO 1886.
--- Because ISO 1886 deleted, delete the corresponding "sampling" chapter (see ISO 3616.2001, Chapter 6).
--- For the test data is stable and reliable, increasing the sample or the laboratory sample humidity-time (see Chapter 7).
This part made the following editorial changes.
--- Standard name changed to "glass mat Test methods - Part 3. Determination of thickness."
This part of the National Standardization Technical Committee fiberglass (SAC/TC245) centralized.
This section is responsible for drafting. Nanjing Fiberglass Research and Design Institute Limited, the national glass fiber product quality supervision and inspection center.
The main drafters of this section. Shiyu Qiang, Tang Jian, Xu Min, Wang Yumei, Shi Zhuo Ying Huang.
This standard replaces the standards previously issued as follows.
--- GB/T 6006.3-1987, GB/T 6006.3-2001.
Test method for glass fiber mat
Part 3. Determination of thickness
1 Scope
GB/T 6006 provisions of this part of the glass fiber mat average thickness, thickness and compression load measurement method of restoring degree.
This method is suitable for glass fiber chopped strand mat, continuous strand glass fiber mat.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Test methods GB/T 9914.3 enhancements Part 3. Determination of mass per unit area (ISO 3374.2000, MOD)
ISO 291 environmental standard plastic sample conditioning and testing (Plastics-Standardatmospherefor
conditioningandtesting)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
The average thickness of averagethickness
According to the method prescribed mat thickness at a predetermined nominal micro pressure measured in millimeters (mm) as a unit.
NOTE. Use this method measured the thickness of a single layer and the average thickness of the mat is not necessarily directly related to the evaluation of the uniformity of the mat thickness must be built in the single-felt
Sheet measuring results. Measurements need to use a smaller area than the contact measurement apparatus specified in the present process.
3.2
Loading thickness thicknessunderload
According to the method prescribed under heavy mat thickness required pressure after a predetermined time measurement, expressed as a percentage of average thickness.
3.3
After the recovery of the compressed recoveryaftercompression
In the mat thickness and weight of a predetermined pressure is removed after a predetermined time interval measured, expressed as a percentage of average thickness.
Principle 4
Under the provisions of the micro pressure measuring total stack thickness of at least two from the outer surface of the mat layer of 5mm between the values \u200b\u200bobtained from Except
To the number of layers is the average thickness.
In both cases after the lapse of a predetermined time interval the pressure applied to a predetermined higher pressure and removed, the stack of measuring two mat
The distance between the outer surfaces of the two values \u200b\u200bobtained is divided by the number of layers laminated mat, the thickness and the compression loading is obtained after the degree of recovery,
He expressed as a percentage of the average thickness.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6006.3-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 6006.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6006.3-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6006.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6006.3-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6006.3-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|