|
US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6006.1-2013: Test method for glass mats -- Part 1: Determination of styrene solubility
Status: Valid GB/T 6006.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6006.1-2013 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Test method for glass mats -- Part 1: Determination of styrene solubility
| Valid |
GB/T 6006.1-2013
|
| GB/T 6006.1-2001 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Test method for glass mats -- Part 1: Determination of styrene solubility
| Obsolete |
GB/T 6006.1-2001
|
| GB/T 6006-1985 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Textile glass chopped-strand mats--Determination of time of dissolution of the binder in styrene
| Obsolete |
GB/T 6006-1985
|
PDF similar to GB/T 6006.1-2013
Basic data | Standard ID | GB/T 6006.1-2013 (GB/T6006.1-2013) | | Description (Translated English) | Test method for glass mats -- Part 1: Determination of styrene solubility | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q36 | | Classification of International Standard | 59.100.10 | | Word Count Estimation | 8,871 | | Older Standard (superseded by this standard) | GB/T 6006.1-2001 | | Quoted Standard | ISO 291 | | Adopted Standard | ISO 2558-2010; IDT | | Regulation (derived from) | National Standards Bulletin No. 18 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: glass fiber chopped strand mat under a certain tensile load immersed in styrene, between raw silk debonding time determination. This standard applies to: reinforced plastics with glass fiber chopped strand mat. | GB/T 6006.1-2013: Test method for glass mats -- Part 1: Determination of styrene solubility---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for glass mats Part 1.. Determination of styrene solubility
ICS 59.100.10
Q36
National Standards of People's Republic of China
Replacing GB/T 6006.1-2001
Test method for glass fiber mat
Part 1. Determination of solubility of styrene
(ISO 2558.2010, Textileglasschopped-strandmatsforreinforcementof
plastics-Determinationoftimeofdissolutionofthebinderinstyrene, IDT)
Issued on. 2013-09-18
2014-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 6006 "Test method for glass mat" is divided into three parts.
--- Part 1. Determination of the solubility of styrene;
--- Part 2. Determination of breaking tensile strength;
--- Part 3. Determination of thickness.
This section GB/T 6006 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 6006.1-2001 "glass mat Test methods - Part 1. Determination of styrene solubility", and
GB/T 6006.1-2001 compared to, in addition to editorial changes outside the main technical changes are as follows.
--- Remove the "Definitions" chapter (see Chapter 3 of the 2001 edition);
--- Increased emulsion styrene (see 5.2,6.2, Chapter 7);
--- Sample probe position from the edge of the original 10mm to 30mm (see 6.1);
--- Increased test equipment during the test requirements of the thermostat (see Chapter 7);
--- Increase the test report the test temperature, test date, etc. (see Chapter 9).
This section uses the translation method identical with ISO 2558.2010 "Plastics reinforced with glass fiber chopped strand mat binder in styrene
Determination of dissolution time "and made the following editorial changes.
--- Modify the standard name.
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 2918-1998 plastic sample conditioning and testing of the standard environment (ISO 291.1997, IDT).
This part of the National Standardization Technical Committee fiberglass (SAC/TC245) centralized.
This section is responsible for drafting. Nanjing Fiberglass Research and Design Institute Limited, the national glass fiber product quality supervision and inspection center.
The main drafters of this section. Hao Zheng Tao, Wang Yumei, Xu Qi, Chen Shang, Fang Yunwei, Shiyu Jiang.
This standard replaces the standards previously issued as follows.
--- GB/T 6006-1985, GB/T 6006.1-2001.
Test method for glass fiber mat
Part 1. Determination of solubility of styrene
1 Scope
GB/T 6006 provisions of this part of the glass fiber chopped strand mat under a certain tensile load is immersed in styrene, debonding between the strands
Determination of the time required.
This method is suitable for glass fiber reinforced plastics chopped strand mat.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 291 environmental standard plastic sample conditioning and testing (Plastics-Standardatmospheresforconditioning
andtesting)
Principle 3
Vertical sample suspended in pure styrene solution, applying a certain tensile load on the sample was attached to the lower end of the sample weight, the weight record
Time required to fall a certain distance.
NOTE. Use a stable emulsion styrene (see 5.2) can better distinguish the high solubility of the binder mat, this method is only applicable in the binder is completely insoluble in water
Case.
4 Instrument
4.1 template for cutline sample size of 125mm × 100mm metal plate.
4.2 Cutting tools, knives, scissors, disc knives.
4.3 beaker, 2000mL minimum capacity, the minimum depth of 195mm.
4.4 round screen, made of stainless steel material, can be loaded into the beaker (shown schematically in Figure 1) should ensure that the length of the strut between the lower clamp and screen
Distance of 50mm. After this round sieve used in the test beaker is removed from the lower jig and falling raw silk.
4.5 a pair of clamps, made of stainless steel, the specimen can be clamped over the entire width. The total mass of the lower jig should be (100 ± 2) g and
You should be able to maintain a balance. One pair suitable fixture is shown in Figure 2.
4.6 stopwatch, accurate to 1s.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6006.1-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 6006.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6006.1-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6006.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6006.1-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6006.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|