HOME   Cart(2)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 5660-2013 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5660-2013: End-suction centrifugal pumps -- Baseplate and installation dimensions
Status: Valid

GB/T 5660: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 5660-2013English189 Add to Cart 3 days [Need to translate] End-suction centrifugal pumps -- Baseplate and installation dimensions Valid GB/T 5660-2013
GB/T 5660-1985English199 Add to Cart 3 days [Need to translate] End-suction centrifugal pumps--Baseplate and installation dimensions Obsolete GB/T 5660-1985

PDF similar to GB/T 5660-2013


Standard similar to GB/T 5660-2013

JB/T 6879   JB/T 13977   GB/T 7782   GB/T 5661   GB/T 5662   GB/T 5657   

Basic data

Standard ID GB/T 5660-2013 (GB/T5660-2013)
Description (Translated English) End-suction centrifugal pumps -- Baseplate and installation dimensions
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J71
Classification of International Standard 23.080
Word Count Estimation 8,854
Older Standard (superseded by this standard) GB/T 5660-1985
Quoted Standard GB/T 5662; JB/T 8680; JB/T 10447
Regulation (derived from) National Standards Bulletin No. 25 of 2013
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the axial suction centrifugal pump (hereinafter referred to as the pump) base and installation dimensions. This standard applies to pumps and Y2, Y3 series three-phase asynchronous motors.

GB/T 5660-2013: End-suction centrifugal pumps -- Baseplate and installation dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
End-suction centrifugal pumps. Baseplate and installation dimensions ICS 23.080 J71 National Standards of People's Republic of China Replacing GB/T 5660-1985 Suction centrifugal pumps Base and installation dimensions Issued on. 2013-12-17 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 5660-1985 "suction centrifugal pumps - Baseplate and installation dimensions", and GB/T 5660-1985 phase Ratio, in addition to editorial changes outside the main technical differences are as follows. --- Modify the normative references (see Chapter 2, Section 2 of the 1985 edition); --- Increased four base numbers and installation dimensions, five kinds of specifications of the motor frame size, 6 sizes pump size marker (see Table 1, Table 2). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pump (SAC/TC211) centralized. This standard was drafted. New Territories Pump Group Co., Ltd., Jiangsu Wu New Pump Manufacturing Co., Ltd., Hefei Huasheng valve limited liability Any company, Zhejiang Institute of Mechatronic Technology, Zhejiang Institute of Electrical Co., Ltd., Xiangfan 525 Pump Co., Ltd., Zhejiang pump Technology Co., Ltd., Shenyang Institute of pumps. The main drafters of this standard. Xu Weiliang, Liujin Kun, Wu Jianbo, Shaowen E, Running an, Pan Chengxiang, Chen Qian, Yang Yi, Huang Yuying. This standard replaces the standards previously issued as follows. --- GB/T 5660-1985. Suction centrifugal pumps Base and installation dimensions

1 Scope

This standard specifies the axial suction centrifugal pump (hereinafter referred to as the pump) base and installation dimensions. This standard applies to pumps and Y2, Y3 series three-phase asynchronous motors.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5662 suction centrifugal pumps (16bar) mark, performance and size JB/T 8680 Y2 series (IP54) three-phase induction motor (frame size 63 to 355) JB/T 10447 Y3 series (IP55) three-phase induction motor (frame size 63 to 355)

3 base and installation dimensions

3.1 pump size should be consistent with the provisions of GB/T 5662's. Motor mounting dimensions should be consistent with JB T 8680 JB/T provision/10447 of. 3.2 base number and size are shown in Table 1 and Figure 1. The basic dimensions are shown in Table 2. Table 1 chassis number and size in millimeters size Base number 2,345,678,910,111,213 L1 800 900 1000 1120 1250 1400 1600 1800 1920 2110 2200 2370 L2 130 150 170 190 205 230 270 300 250 250 250 250 L3 540 600 660 740 840 940 1060 1200 1400 1600 1700 1800 L4 ± 25 35 35 40 40 45 50 55 55 70 70 70 70 L5 0 0 0 0 0 0 0 0 700 800 850 900 B1 270 300 340 380 430 480 530 600 660 770 770 860 B2 320 350 400 440 490 550 600 670 710 820 820 920 B3 360 390 450 490 540 610 660 730 780 890 890 990 hmax 125 125 125 140 160 180 200 200 110 110 110 150 da hole with bolt M16 M16 M20 M20 M20 M24 M24 M24 M24 M24 M24 M24 Note. The table dimensions L1 and B1, respectively, for the length and width of the working area, excluding casting error. a hole size according to GB/T 5277 in dh provisions.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5660-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5660-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5660-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5660-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5660-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5660-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.