|
US$294.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5275.9-2014: Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5275.9-2014 | English | 294 |
Add to Cart
|
3 days [Need to translate]
|
Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method
| Valid |
GB/T 5275.9-2014
|
PDF similar to GB/T 5275.9-2014
Basic data | Standard ID | GB/T 5275.9-2014 (GB/T5275.9-2014) | | Description (Translated English) | Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G86 | | Classification of International Standard | 71.040.40 | | Word Count Estimation | 15,115 | | Date of Issue | 7/8/2014 | | Date of Implementation | 12/1/2014 | | Quoted Standard | ISO 6143; ISO 7504; ISO 16664 | | Adopted Standard | ISO 6145-9-2009, IDT | | Regulation (derived from) | 2014 National Standards Bulletin No. 18 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of one or more condensable components of the continuous production of calibration gas mixtures approach. By synthesizing the relative standard uncertainty contributed to obtain this standard relative expanded uncertainty of | GB/T 5275.9-2014: Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 9: Saturation method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 9.. Saturation method
ICS 71.040.40
G86
National Standards of People's Republic of China
Preparation of gas analysis dynamic volume calibration
Mixed gases - Part 9. Saturation method
methods-Part 9. Saturationmethod
(ISO 6145-9.2009, IDT)
Issued on. 2014-07-08
2014-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 5275 "gas analysis dynamic volume Preparation of calibration gas mixtures" is divided into the following sections.
--- Part 1. calibration method;
--- Part 2. positive displacement pump;
--- Part 4. continuous injection;
--- Part 5. Capillary calibration devices;
--- Part 6. Critical orifices;
--- Part 7. Thermal mass flow controller;
--- Part 8. Diffusion method;
--- Part 9. Saturation method;
--- Part 10. Permeation;
--- Part 11. Electrochemical method occurs.
This section GB/T 95275 Part of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 6145-9.2009 "gas analysis dynamic volume Preparation of calibration gas mixtures 9
Part I. saturation method. "
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 10628-2008 gas analysis calibration gas mixture composition measurements and calibration comparison (ISO 6143.2001,
IDT);
--- GB/T 14850-2008 gas analysis vocabulary (ISO 7504.2001, IDT).
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Gas Standardization Technical Committee (SAC/TC206) centralized.
This section drafted by. China Institute of Metrology, Southwest Chemical Industry Research and Design Institute Limited.
The main drafters of this section. send Wang, Chen Yali.
Preparation of gas analysis dynamic volume calibration
Mixed gases - Part 9. Saturation method
1 Scope
GB/T 5275 is part of this dynamic part of the calibration volume prepared by the national standards for mixing gases. This section
It specifies the use of one or more condensable components of the gas mixture the continuous preparation of a calibration method. Through the relative standard uncertainty contribution
Synthesis, the process to obtain the relative expanded uncertainty of less than 1% (expansion factor k = 2).
The rest of the series is different from the method described in this section does not require precise measurements of the velocity, calculated as the volume fraction of the formula
No flow parameters.
For condensable component part of the gas and gas adsorption prone, difficult to prepare stable calibration concentration precise method using a static mixing
Aiki. Moreover, this calibration pressure of the mixed gas is not close to saturation vapor pressure, otherwise condensation will occur. Saturated vapor pressure method could
Preparation for this type of mixed gas.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 6143 Gas analysis calibration gas mixture composition measurements and check Comparative Law (Gasanalysis-Comparison
methodsfordeterminingandcheckingthecompositionofcalibrationgasmixtures)
ISO 7504 Gas analysis vocabulary (Gasanalysis-Vocabulary)
ISO 16664 Gas analysis calibration gases and gas mixture Guide (Gasanalysis-Handlingofcalibra-
tiongasesandgasmixtures-Guidelines)
3 Terms and Definitions
Terms and definitions as defined in ISO 7504 apply to this document.
Principle 4
When its condensed phases reach equilibrium, the vapor pressure of pure substances depends only on the temperature. At a pressure near atmospheric gas phase and no significant
The case of interaction (for example, the occurrence of interactions between hydrocarbon gas mixture) can be calculated based on the set of temperature and pressure of the system
Sub-volume fraction.
If no other external factors, at a certain temperature, so that the carrier gas simply by contacting the gaseous components of the condensed phase to achieve full
And the balance is very slow. To speed up the process, at higher temperatures T1, a carrier gas through the condensed phase, and then mixing the resulting
Gas is cooled to a temperature below the dew point T2. To ensure saturated temperature difference (T1-T2) is at least 5K.
The volume fraction of component x is approximately equal to the component at the temperature T2 is divided by the vapor pressure px at the same temperature the mixture gas condenser
Body total pressure p, that was the formula (1).
φx =
px
(1)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5275.9-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 5275.9-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5275.9-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5275.9-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|