HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 5170.5-2016 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5170.5-2016: Inspection methods for environmental testing equipment for electric and electronic products -- Part 5: Damp heat testing equipment
Status: Valid

GB/T 5170.5: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 5170.5-2016English279 Add to Cart 3 days [Need to translate] Inspection methods for environmental testing equipment for electric and electronic products -- Part 5: Damp heat testing equipment Valid GB/T 5170.5-2016
GB/T 5170.5-2008English639 Add to Cart 3 days [Need to translate] Inspection methods for environmental testing equipment for electric and electronic products -- Damp heat testing equipment Obsolete GB/T 5170.5-2008
GB/T 5170.5-1996English319 Add to Cart 3 days [Need to translate] Inspection on methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments Obsolete GB/T 5170.5-1996
GB 5170.5-1985English199 Add to Cart 2 days [Need to translate] Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat, steady state testing equipments Obsolete GB 5170.5-1985

PDF similar to GB/T 5170.5-2016


Standard similar to GB/T 5170.5-2016

GB/T 5169.19   GB/T 5169.21   GB/T 5169.16   GB/T 5170.14   GB/T 5170.13   GB/T 5170.11   

Basic data

Standard ID GB/T 5170.5-2016 (GB/T5170.5-2016)
Description (Translated English) Inspection methods for environmental testing equipment for electric and electronic products -- Part 5: Damp heat testing equipment
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 19.040
Word Count Estimation 14,167
Date of Issue 2016-12-13
Date of Implementation 2017-07-01
Older Standard (superseded by this standard) GB/T 5170.5-2008
Regulation (derived from) National Standard Announcement No.58 of 2016
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 5170.5-2016: Inspection methods for environmental testing equipment for electric and electronic products -- Part 5: Damp heat testing equipment


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspection methods for environmental testing equipments for electric and electronic products - Part 5. Damp heat testing equipments ICS 19.040 K04 National Standards of People's Republic of China Replace GB/T 5170.5-2008 Inspection methods for environmental testing equipment for electric and electronic products Part 5. damp heat test equipment electronicproducts-Part 5. Dampheattestingequipments 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 Test items 1 5 Inspection equipment and requirements 2 6 test load 2 7 test conditions 3 Test Method 3 9 test results 10 10 inspection period 10 Appendix A (informative) Method of measuring relative humidity by wet and dry bulb thermometer 11

Foreword

GB/T 5170 is divided into the following sections. General rules for inspection of environmental testing equipment for electric and electronic products GB/T 5170.1-2016 GB/T 5170.2-2008 Environmental testing equipment for electrical and electronic products - Test methods - Temperature test equipment GB/T 5170.8-2008 Environmental testing equipment for electric and electronic products - Salt spray test equipment GB/T 5170.9-2008 Environmental testing equipment for electrical and electronic products - Test methods for solar radiation test equipment GB/T 5170.10-2008 Environmental testing equipment for electrical and electronic products - High and low temperature and low pressure test equipment GB/T 5170.11-2008 Electrical and electronic products Environmental testing equipment Inspection methods Corrosion gas test equipment GB/T 5170.13-2005 Electrical and electronic products Environmental test equipment Basic parameters Verification method Vibration (sine) test With mechanical shaking table Electrical and electronic products - Environmental testing equipment - Basic parameters - Test methods - Vibration (sine) test GB/T 5170.14 With electric shaking table GB/T 5170.15-2005 Electrical and electronic products Environmental test equipment Basic parameters Verification method Vibration (sine) test Shake the table with hydraulic GB/T 5170.16-2005 Electrical and electronic products Environmental test equipment Basic parameters Verification method Steady-state acceleration test With a centrifuge GB/T 5170.17-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Low temperature/low pressure/wet Thermal sequence test equipment GB/T 5170.18-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Temperature/humidity combination The Ring test equipment --- GB/T 5170.19-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Temperature/vibration (sine) Integrated test equipment GB/T 5170.20-2005 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Water test equipment GB/T 5170.21-2008 Electrical and electronic products Environmental testing equipment Basic parameters Verification method Vibration (random) test Shake the table with hydraulic This part is part 5 of GB/T 5170. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement GB/T 5170.5-2008 "electrical and electronic products environmental test equipment test method damp heat test equipment", and GB/T 5170.5-2008 compared to the main technical changes are as follows. - the scope of the original "test equipment used by the first inspection/acceptance inspection and periodic inspection" amended to "test equipment used in the inspection Test. (See Chapter 1); --- normative reference documents were deleted GB/T 6999-1986, GB/T 16839.1, IEC 60751, increased GB 12348- 2008, GB/T 2423.50 (see Chapter 2); - The test items are modified to be presented as a list (see Chapter 4); --- test items "rise and fall characteristics" modified to "alternating hot and humid characteristics" (see Table 1); --- delete the test project "every 5min average temperature change rate"; In the "Inspection of the main equipment and requirements" section, the temperature measurement system from the original "measurement results of the expansion of uncertainty (k = 2) is not Greater than one-third of the allowable deviation of the temperature of the test, "modified to" the maximum allowable error is generally not more than ± 0.2 ℃ "; humidity measurement The system from the original "measurement results of the extended uncertainty (k = 2) is not greater than the measured humidity tolerance of one-third", modify For the "maximum allowable error is generally not more than ± 2% RH" (see Table 2); - rearranged the structural hierarchy of the test method chapter and increased the selection of the test temperature and relative humidity values (see 8.1.2); - increased information that should be included in the inspection report at least (see 9.3); --- delete the original Appendix A "test items selection"; - Append the Appendix B of the original normative appendix "Measurement of relative humidity by wet and dry gauge" and modify it as Appendix A of the data appendix "Dry and dry bulb temperature Measure the relative humidity of the method ", and modify the corresponding measurement method. This part of the National Electrical and Electronic Products Environmental Standards and Environmental Testing Standardization Technical Committee (SAC/TC8) proposed and centralized. This part of the drafting unit. Ministry of Industry and Information Technology Institute of Electronics Fifth, Guangzhou five Environmental Instruments Co., Ltd., China Electric Research Ltd., China Aviation Industry Corporation Beijing Great Wall Metrology and Testing Technology Research Institute, Guangdong Power Grid Co., Ltd. Electricity Science Research Institute, Wuxi Sunan Experimental Equipment Co., Ltd. The main drafters of this part are. Wu Weixiong, Xie Chenhao, Huang Kaiyun, Lu Guoyi, Liu Yiran, Ni Yiming, Xie Kaifeng, Su Wei, Cai Jinwen, Lai Wenguang This part of the previous version of the standard to replace the release of the situation. GB 5170.5-1985, GB/T 5170.5-1996, GB/T 5170.5-2008. Inspection methods for environmental testing equipment for electric and electronic products Part 5. damp heat test equipment

1 Scope

This part of GB/T 5170 specifies the inspection items, inspection equipment and requirements of the damp heat test equipment (hereinafter referred to as "equipment"). Test load, test conditions, test methods, test results, inspection cycle and so on. This part applies to the GB/T 2423.3, GB/T 2423.4, GB/T 2423.16, GB/T 2423.50 test equipment used in the inspection Test. This part also applies to the testing of similar test equipment.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 2423.3 Environmental testing for electric and electronic products - Part 2. Test methods - Test Cab. constant damp heat test GB/T 2423.4 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db alternating hot and humid (12h 12h cycle) GB/T 2423.16 Environmental testing for electric and electronic products - Part 2. Test methods - Test J and Guideline. GB/T 2423.50 Environmental tests - Part 2. Test methods - Test Cy. Constant damp heat is mainly used for accelerated test of components Electrical and electronic products - Environmental testing - Temperature/humidity chamber performance verification GB/T 5170.1-2016 Environmental testing equipment for electric and electronic products - Test methods - Part 1. General Industrial enterprises - Environmental noise emission standards

3 terms and definitions

GB/T 5170.1-2016 The terms and definitions defined apply to this document.

4 test items

The test items in this section are shown in Table 1. Table 1 Test items Serial number inspection items

1 temperature deviation

2 relative humidity deviation

3 temperature fluctuation

4 relative humidity fluctuation

5 temperature uniformity


Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5170.5-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5170.5-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5170.5-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5170.5-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5170.5-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5170.5-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.