|
US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5170.19-2018: Inspection methods for environmental testing equipment -- Part 19: Combined temperature vibration (sinusoidal) testing equipment
Status: Valid GB/T 5170.19: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5170.19-2018 | English | 399 |
Add to Cart
|
4 days [Need to translate]
|
Inspection methods for environmental testing equipment -- Part 19: Combined temperature vibration (sinusoidal) testing equipment
| Valid |
GB/T 5170.19-2018
|
| GB/T 5170.19-2005 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Inspection methods for basic parameters of environmental testing equipment for electric and electronic products -- Combined temperature/vibration (sinusoidal) testing equipment
| Obsolete |
GB/T 5170.19-2005
|
| GB/T 5170.19-1989 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Inspection methods for basic parameters of environmen-tal testing equipments for electric and electronic products--Combined temperature/vibration (sinusoidal)testing equipments
| Obsolete |
GB/T 5170.19-1989
|
PDF similar to GB/T 5170.19-2018
Basic data | Standard ID | GB/T 5170.19-2018 (GB/T5170.19-2018) | | Description (Translated English) | Inspection methods for environmental testing equipment -- Part 19: Combined temperature vibration (sinusoidal) testing equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K04 | | Classification of International Standard | 19.040 | | Word Count Estimation | 20,299 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-07-01 | | Older Standard (superseded by this standard) | GB/T 5170.19-2005 | | Regulation (derived from) | National Standard Announcement No. 17 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the characteristics, temperature, vibration (sinusoidal) comprehensive test equipment (hereinafter referred to as test equipment) characteristics requirements, measuring instruments, measurement uncertainty, inspection load, inspection conditions, inspection methods, inspection results, inspection cycle. This standard applies to GB/T 2423.35, GB/T 2423.36 and GB/T 2424.22 temperature (low temperature, high temperature), vibration (sinusoidal) comprehensive test equipment inspection. This standard also applies to the inspection of similar test equipment. | GB/T 5170.19-2018: Inspection methods for environmental testing equipment -- Part 19: Combined temperature vibration (sinusoidal) testing equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspection methods for environmental testing equipments--Part 19. Combined temperature vibration (sinusoidal) testing equipment
ICS 19.040
K04
National Standards of People's Republic of China
Replace GB/T 5170.19-2005
Environmental test equipment inspection method
Part 19. Temperature, vibration (sinusoidal) comprehensive test equipment
Part 19.Combinedtemperaturevibration(sinusoidal)testingequipment
Published on.2018-12-28
2019-07-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Feature requirements 4
5 measuring instruments 5
6 Measurement uncertainty 6
7 Test conditions 6
8 General Provision 6
9 Test method 7
10 test results 10
11 inspection cycle 11
Appendix A (informative) Description of measurement uncertainty in inspections 12
Foreword
GB/T 5170 "Environmental Test Equipment Basic Parameters Inspection Method" is a series of standards, divided into several parts. GB/T 5170 contains the following
section.
--- GB/T 5170.1-2016 Electrical and electronic products - Test methods for environmental testing equipment - Part 1. General
--- GB/T 5170.2-2017 Environmental testing equipment testing methods - Part 2. Temperature testing equipment;
GB/T 5170.5-2016 - Test methods for environmental testing equipment - Part 5. Damp heat test equipment;
--- GB/T 5170.8-2017 Test methods for environmental testing equipment - Part 8. Salt spray test equipment;
--- GB/T 5170.9-2017 Environmental testing equipment - Test methods - Part 9. Solar radiation test equipment;
--- GB/T 5170.10-2017 Environmental testing equipment - Test methods - Part 10. High and low temperature low pressure test equipment;
--- GB/T 5170.11-2017 Environmental testing equipment - Test methods - Part 11. Corrosion gas test equipment;
GB/T 5170.13-2018 - Test methods for environmental testing equipment - Part 13. Mechanical vibrations for vibration (sinusoidal) test
system;
---GB/T 5170.14-2009 Environmental test equipment basic parameters test method Vibration (sinusoidal) test electric vibration table;
GB/T 5170.15-2018 - Test methods for environmental testing equipment - Part 15. Hydraulic vibrations for vibration (sinusoidal) test
system;
GB/T 5170.16-2018 - Test methods for environmental testing equipment - Part 16. Centrifugal machines for steady-state acceleration test;
---GB/T 5170.17-2005 Electrical and electronic products environmental testing equipment basic parameters verification method low temperature/low pressure/damp heat
Integrated sequential test equipment;
---GB/T 5170.18-2005 Electrical and electronic products environmental testing equipment basic parameters verification method temperature/humidity combination cycle
Test equipment
device;
---GB/T 5170.20-2005 Electrical and electronic products environmental testing equipment basic parameters verification method water test equipment;
---GB/T 5170.21-2008 Electrical and electronic products environmental testing equipment basic parameters test method vibration (random) test
Hydraulic shaker.
This part is the 19th part of GB/T 5170.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 5170.19-2005 "Electrical and electronic products environmental test equipment basic parameters verification method temperature/vibration (positive
Chord) Comprehensive Test Equipment, compared with GB/T 5170.19-2005, the main technical changes are as follows.
--- For ease of use, repeat some of the terms and definitions in GB/T 5170.1 (see 3.1, 3.2, 3.3, 3.6, 3.7,
3.10);
--- Deleted the original Chapter 4 "Verification Project" and changed to "Feature Requirements" (see Chapter 4);
--- GB/T 2423.10, GB/T 2423.35, GB/T 2423.36 "test equipment" does not stipulate the relevant requirements of the inspection items from this
Partial adjustment, and correspondingly remove the requirements of the relevant measuring instruments;
--- Added the chapter "Measurement Uncertainty" (see Chapter 6);
--- For ease of use, the environmental conditions at the time of the specific test are listed (see 7.1);
--- Added the chapter "General Provisions" (see Chapter 8);
--- For ease of use, the steps, formulas and results processing of each test item are listed (see Chapter 9);
--- According to the requirements of GB/T 5170.1, the "inspection report should include at least the following information" (see Chapter 10);
--- Added Appendix A "Description of Measurement Uncertainty in Inspection".
This part is proposed and managed by the National Technical Committee for Environmental Conditions and Environmental Testing Standardization of Electrical and Electronic Products (SAC/TC8).
This section drafted by. Ministry of Industry and Information Technology Electronics Fifth Institute, Xiamen Saibao Industrial Technology Research Institute Co., Ltd., Guangzhou Saibao
Metrology and Testing Center Service Co., Ltd., Foshan Saibao Information Industry Technology Research Institute Co., Ltd., Suzhou Su Test Equipment Co., Ltd.
the company.
The main drafters of this section. Zheng Shuli, Fan Chenggang, Yan Fei, Zhong Wei, Xu Jun, Li Sen, Huang Xiaoguang.
The previous versions of the standards replaced by this section are.
---GB/T 5170.19-1989, GB/T 5170.19-2005.
Environmental test equipment inspection method
Part 19. Temperature, vibration (sinusoidal) comprehensive test equipment
1 Scope
This part of GB/T 5170 specifies the characteristics and requirements of temperature, vibration (sinusoidal) comprehensive test equipment (hereinafter referred to as test equipment).
Measuring instrument, measurement uncertainty, inspection load, inspection condition, inspection method, inspection result, inspection period.
This part applies to GB/T 2423.35, GB/T 2423.36 and GB/T 2424.22 temperature (low temperature, high temperature), vibration (sinusoidal) synthesis
Inspection of test equipment.
This section also applies to inspections of similar test equipment.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.35 Environmental testing of electric and electronic products - Part 2. Test method test Z/AFc. heat and non-heating test
Low temperature/vibration (sinusoidal) comprehensive test of samples (GB/T 2423.35-2005, IEC 60068-2-50.1983, IDT)
GB/T 2423.36 Environmental testing for electric and electronic products - Part 2. Test method test Z/BFc. heat and non-heating test
High temperature/vibration (sinusoidal) comprehensive test of samples (GB/T 2423.36-2005, IEC 60068-2-51.1983, IDT)
GB/T 5170.1-2016 - Test methods for environmental testing equipment - Part 1 . General
GB/T 16839.1 Thermocouple Part 1. Electromotive force specifications and tolerances (GB/T 16839.1-2018, IEC 60584-1.
2013, IDT)
GB/T 30121 industrial platinum thermal resistance and platinum temperature sensing element (GB/T 30121-2013, IEC 60751.2008, IDT)
JJF1059.1-2012 Measurement uncertainty evaluation and representation
3 Terms and definitions
The following terms and definitions as defined in GB/T 5170.1-2016 apply to this document. For ease of use, the following is repeated
Certain terms and definitions in GB/T 5170.1-2016.
3.1
Temperature deviation
In the steady state of the test chamber (chamber), the measurement points of the working space are measured for the highest temperature and the lowest temperature and the set temperature within the specified time.
Up and down deviation.
Calculated according to formula (1) and formula (2).
ΔTmax=Tmax-TN (1)
ΔTmin=Tmin-TN (2)
In the formula.
ΔTmax---temperature deviation, in degrees Celsius (°C);
ΔTmin---the deviation in temperature, the unit is Celsius (°C);
Tmax --- the measured maximum temperature within the specified time, in degrees Celsius (°C);
Tmin --- The measured minimum temperature within the specified time, in degrees Celsius (°C);
TN --- Set the temperature in degrees Celsius (°C).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5170.19-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 5170.19-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5170.19-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5170.19-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 5170.19-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5170.19-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|