|
US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5169.5-2020: (Fire hazard test for electric and electronic products - Part 5: Test flame Needle flame test method Apparatus, confirmation test method and guide)
Status: Valid GB/T 5169.5: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5169.5-2020 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
(Fire hazard test for electric and electronic products - Part 5: Test flame Needle flame test method Apparatus, confirmation test method and guide)
| Valid |
GB/T 5169.5-2020
|
| GB/T 5169.5-2008 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Fire hazard testing for electric and electronic products -- Part 5: Test flames -- Needle test method -- Apparatus, confirmatory arrangement and guidance
| Obsolete |
GB/T 5169.5-2008
|
| GB/T 5169.5-1997 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products. Part 2: Test methods. Section 2: Needle-flame test
| Obsolete |
GB/T 5169.5-1997
|
| GB/T 5169.5-1985 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products--Test method of needle-flame
| Obsolete |
GB/T 5169.5-1985
|
PDF similar to GB/T 5169.5-2020
Basic data | Standard ID | GB/T 5169.5-2020 (GB/T5169.5-2020) | | Description (Translated English) | (Fire hazard test for electric and electronic products - Part 5: Test flame Needle flame test method Apparatus, confirmation test method and guide) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K04 | | Word Count Estimation | 19,122 | | Date of Issue | 2020-11-19 | | Date of Implementation | 2021-06-01 | | Older Standard (superseded by this standard) | GB/T 5169.5-2008 | | Regulation (derived from) | National Standard Announcement No. 26 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 5169.5-2020: (Fire hazard test for electric and electronic products - Part 5: Test flame Needle flame test method Apparatus, confirmation test method and guide)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Fire hazard test for electric and electronic products Part 5.Test flame Needle flame test method Apparatus, confirmation test method and guide)
ICS 13.220.40;29.020
K04
National Standards of People's Republic of China
Replace GB/T 5169.5-2008
Fire hazard test for electric and electronic products
Part 5.Test method of needle flame test flame
Equipment, confirmation test methods and guidelines
Released on 2020-11-19 Implemented on 2021-06-01
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Test purpose 3
5 Description of the test device 3
6 Sample 4
7 Time to apply flame 5
8 Pretreatment and test conditions 5
9 Test procedure 5
10 Observation and measurement 6
11 Evaluation of test results 6
12 Information to be given in relevant specifications 6
13 Test report 6
Appendix A (Normative Appendix) Confirmation Test Method 8
Appendix B (informative appendix) Product committee specification example 12
Appendix C (informative appendix) Comparison of results of verification test using propane and butane as fuel 13
Reference 14
Figure 1 Burner and flame 7
Figure 2 Test position 7
Figure A.1 Copper block 9
Figure A.2 Confirmation test device 10
Figure A.3 Gauge for measuring the flame height and the distance between the burner and the copper block (example) 11
Table B.1 Severity levels and requirements 12
Table C.1 Verification test results of propane and butane as fuel 13
Foreword
GB/T 5169 "Fire Hazard Test for Electrical and Electronic Products" consists of the following parts.
---Part 1.Terminology of fire test;
---Part 2.General rules for fire hazard assessment guidelines;
---Part 5.Test flame needle flame test method device, confirmation test method and guidance;
---Part 9.Guidelines for Fire Hazard Assessment, General Rules for Preselected Test Procedures;
---Part 10.Glow wire/hot wire basic test method Glow wire device and general test method;
---Part 11.Glow wire/hot wire basic test method Glow wire flammability test method of finished product (GWEPT);
--- Part 12.Glow-wire/hot-wire basic test method. Glow-wire flammability index (GWFI) test method for materials;
---Part 13.Glow wire/hot wire basic test method Glow wire ignition temperature (GWIT) test method of materials;
---Part 14.Test flame 1kW nominal pre-mixed flame device, confirmation test method and guide;
---Part 15.Test flame 500W flame device and confirmation test method;
---Part 16.Test flame 50W horizontal and vertical flame test method;
---Part 17.Test flame 500W flame test method;
---Part 18.General rules for the toxicity of combustion streams;
---Part 19.Abnormal thermal compression stress release deformation test;
---Part 20.Summary and correlation of flame surface spread test methods;
---Part 21.Abnormal hot ball pressure test method;
---Part 22.Test flame 50W flame device and confirmation test method;
---Part 23.Test flame 500W vertical flame test method for tubular polymeric materials;
---Part 24.Guidelines for Fire Hazard Assessment Insulating Liquids;
---Part 25.General Rules for Smoke Blur;
---Part 26.Summary and correlation of smoke fuzzy test methods;
---Part 29.General rules for heat release;
---Part 30.Summary and correlation of heat release test methods;
---Part 31.General rules for flame surface spread;
---Part 32.Heat release of heat release of insulating liquid;
--- Part 33.Guideline for Fire Hazard Assessment, General Principles of Ignitability;
---Part 34.Summary and correlation of ignitability test methods for fire hazard assessment guidelines;
---Part 35.General rules for corrosion hazards of combustion streams;
---Part 36.Summary and correlation of the corrosion hazard test methods of combustion flow;
---Part 38.Summary and correlation of the toxicity test methods of combustion streams;
---Part 39.Use and explanation of the results of the toxicity test of the combustion stream;
---Part 40.Toxicity evaluation device and test method of combustion stream;
---Part 41.Calculation and explanation of the results of the toxicity evaluation test of the combustion stream;
---Part 42.Test guidelines for confirmation of test flames;
---Part 44.Guidelines for Fire Hazard Assessment, Fire Hazard Assessment;
---Part 45.Fire hazard assessment guidelines for fire safety engineering;
--- Part 46.Determination of characteristic heat flux during ignition of non-contact flame source of test flame.
This part is Part 5 of GB/T 5169.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 5169.5-2008 "Fire Hazard Test for Electrical and Electronic Products Part 5.Test Flame Needle Flame Test Method
Compared with GB/T 5169.5-2008, the main technical changes are as follows.
---Modified the scope (see Chapter 1, Chapter 1 of the.2008 edition);
--- Added terms and definitions (see Chapter 3, Chapter 3 of the.2008 edition);
---The purpose of the test in Chapter 4 has been revised, and the requirements for the test flame have been added (see Chapter 4, Chapter 4 of the.2008 edition);
---Added the requirements for installing control valves to control gas flow (see 5.4);
---The content of 9.3 was revised, and the specific provisions of the test flame in the test process were added (see 9.3, 9.2 in the.2008 edition);
---Update the text of Appendix A test procedures (see A.3, A.3 of the.2008 edition);
---Informative Appendix B and Informative Appendix C have been added.
The translation method used in this part is equivalent to the IEC 60695-11-5.2016 ``Fire Hazard Test Part 11-5.Test Flame Needle Flame
Test method installation, confirmation test method and guideline".
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB/T 2918-2018 Standard environment for condition adjustment and testing of plastic specimens (ISO 291.2008, MOD)
---GB/T 16499-2017 Compilation of electrical and electronic safety publications and basic safety publications and multi-disciplinary shared safety publications
Guidelines for the application of objects (IEC Guide104.2010, NEQ)
---GB/T 20002.4-2015 Drafting of specific content in the standard Part 4.Safety related content in the standard (ISO /
IEC Guide51.2014,MOD)
This section has made the following editorial changes.
---In order to be consistent with the existing standard series, the name of this part is changed to "Fire Hazard Test of Electrical and Electronic Products Part 5.Test
Flame Needle Flame Test Method Apparatus, Confirmation Test Method and Guideline".
This part was proposed by China Electrical Equipment Industry Association.
This part is under the jurisdiction of the National Standardization Technical Committee for Fire Hazard Testing of Electrical and Electronic Products (SAC/TC300).
Drafting organizations of this section. China Electrical Equipment Research Institute Co., Ltd., the Fifth Institute of Electronics of the Ministry of Industry and Information Technology, Shenzhen Inspection
Inspection and Quarantine Science Research Institute, Guangdong Midea Refrigeration Equipment Co., Ltd., China Household Electrical Appliances Research Institute, Guangdong Shengyi Technology Co., Ltd., Dong
Guan Yuehua Electronic Technology Co., Ltd., Jiangsu Topmilo Environmental Testing Equipment Co., Ltd., Weikai Testing Technology Co., Ltd., Shandong Province Products
Quality Inspection Institute, Shenzhen Institute of Metrology and Quality Inspection, China Electronics Standardization Institute, Guangzhou Customs Technology Center, China Quality
Quality Certification Center, Beijing Tairuite Testing Technology Service Co., Ltd., Schneider Electric (China) Co., Ltd. Shanghai Branch, Haier Zhi
Co., Ltd., Ningbo Institute of Information Technology Application, Chinese Academy of Sciences, Shenzhen Customs Industrial Products Testing Technology Center, Guangdong Yuanrong New Materials
Material Co., Ltd.
The main drafters of this section. Liu Xin, Wang Shenghong, Wang Chengtao, Zhang Hanping, Wan Cheng, Liu Xiuzhen, Guan Jian, Li Guangbin, Lian Zhaocai, Liu Yan, Wang Xin,
Zhuang Hui, Li Yuzhen, Wu Zheng, Liu Jiang, Gao Lingsong, Qin Xiaomei, He Shengtao, Pan Yijie, Zhao Xingfang, Chen Xin, Zhang Yuanqin.
The previous versions of the standards replaced by this part are as follows.
---GB/T 5169.5-1985, GB/T 5169.5-1997, GB/T 5169.5-2008.
Introduction
The best way to check the fire hazard of electrical and electronic products is to truly reproduce the actual conditions, but in most cases it is impossible
of. Therefore, according to the actual situation, the fire hazard test of electrical and electronic products is best to simulate the actual effect as much as possible.
Parts of electrical and electronic equipment may experience thermal stress due to electricity. This will cause degradation, which may reduce equipment
The safety performance of these parts should not be excessively affected by the heat and fire generated inside the equipment.
Insulating materials or other combustible materials that are easy to spread flames inside the equipment may be affected by the flames generated by faulty components.
Ignite. Under certain conditions, such as fault current that forms leakage tracking, overload of components or parts, and poor contact, flames may occur.
Such flames may affect nearby combustible parts.
This part is used to detect and describe the response characteristics of materials, products or components to heat and flame under controlled laboratory conditions.
Describe or evaluate the fire hazard or fire hazard of materials, products or components under actual fire conditions. This section may involve hazardous materials,
Work and equipment.
This section does not involve all safety issues related to the use of this section.
The responsibility of the user of this section is to establish appropriate safety and health protection measures, and determine the adaptability to its limitations before use.
Fire hazard test for electric and electronic products
Part 5.Test method of needle flame test flame
Equipment, confirmation test methods and guidelines
1 Scope
The needle flame test specified in this part of GB/T 5169 is used to simulate the effect of small flames caused by fault conditions, using simulation technology
Assess the fire hazard. When considering all factors related to the assessment of fire hazard for a particular end use, the results of this test
Elements of risk assessment.
This section applies to electrical and electronic product equipment, equipment components and parts, and also applies to solid insulating materials or other combustible materials.
This part is intended for product committees to write standards based on the principles specified in IEC Guide104 and ISO /IEC Guide51
use.
One of the tasks of the product committee is to use this series of standards wherever applicable when writing its own standards. Unless relevant
Standard specifically mentioned or listed is not applicable, otherwise the requirements, test methods or test conditions of this section are applicable.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 5169.1-2015 Fire hazard test of electric and electronic products Part 1.Fire test terminology (IEC 60695-4.2012, IDT)
ISO 291 Plastics-Standardatmospheresforconditioning
andtesting) ISO 4046-4.2016 Paper, paperboard, pulp and their terms vocabulary Part 4.Paper and paperboard grades and processed products
ISO 13943.2008 Fire Safety Vocabulary
ISO /IEC Guide51 Guidelines concerning safety content in safety standards
Compilation of IEC Guide104 safety publications and application guidelines for basic safety publications and multi-disciplinary public safety publications
ASTMB187 Standard Specification for Copper Rods, Busbars, Rods and Shapes and General Rods, Rods and Shapes
3 Terms and definitions
GB/T 5169.1-2015, ISO 13943.2008 and ISO 4046-4.20161) and the following terms and definitions apply to this document.
1) The original text of IEC is ISO 4046.2012, according to the content should be ISO 4046-4.2016.
The database addresses used by ISO and IEC to maintain standardized terminology are as follows.
|