GB/T 5169.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5169.1-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests
| Valid |
GB/T 5169.1-2025
|
| GB/T 5169.1-2015 | English | 174 |
Add to Cart
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products -- Part 1: Terminology concerning fire tests
| Valid |
GB/T 5169.1-2015
|
| GB/T 5169.1-2007 | English | 799 |
Add to Cart
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products -- Part 1: Terminology concerning fire tests
| Obsolete |
GB/T 5169.1-2007
|
| GB/T 5169.1-1997 | English | 799 |
Add to Cart
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products. Part 4: Terminology concerning fire tests
| Obsolete |
GB/T 5169.1-1997
|
| GB/T 5169.1-1985 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Fire hazard testing for electric and electronic products--Terminology
| Obsolete |
GB/T 5169.1-1985
|
Basic data | Standard ID | GB/T 5169.1-2025 (GB/T5169.1-2025) | | Description (Translated English) | Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests | | Sector / Industry | National Standard (Recommended) | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 5169.1-2015 | GB/T 5169.1-2015: Fire hazard testing for electric and electronic products -- Part 1: Terminology concerning fire tests
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Fire hazard testing for electric and electronic products - Part 1. Terminology concerning fire tests)
ICS 01.040.13; 29.020
K04
National Standards of People's Republic of China
Replacing GB/T 5169.1-2007
Fire hazard testing for electric and electronic products
Part 1. Terminology concerning fire tests
Part 1. Terminologyconcerningfiretests
(IEC 60695-4.2012, Firehazardtesting-
Part 4. Terminologyconcerningfiretestsforelectrotechnicalproducts, IDT)
Issued on. 2015-10-09
2016-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
3.1 The term "item" 1
3.2 Other terms and definitions
Reference 5
Foreword
GB/T 5169 "Fire hazard testing for electric and electronic products" have or plan to release the following sections.
--- Part 1. Terminology concerning fire tests;
--- Part 2. Guidance for assessing the fire hazard - General;
--- Part 5. Test flames - Needle-flame test methods for confirming test methods and guidelines;
--- Part 9. Guidance for assessing the fire hazard of preselection testing procedures - General;
--- Part 10. Glowing/hot wire based test methods - Glow - wire apparatus and common test procedure;
--- Part 11. Glowing/hot wire based glow wire flammability test methods of the finished product;
--- Part 12. Glowing/hot wire based test methods for materials glow wire flammability index (GWFI) test methods;
--- Part 13. Glowing/hot wire based test methods - Glow - wire ignition temperature materials (GWIT) test methods;
--- Part 14. Test flames - 1kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance;
--- Part 15. Test flames - 500W flames - Apparatus and confirmation test methods;
--- Part 16. Test flames - 50W horizontal and vertical flame test methods;
--- Part 17. Test flames - 500W flame test methods;
--- Part 18. General toxic combustion stream;
--- Part 19. Abnormal heat - Mould stress relief distortion test;
--- Part 20. Surface spread of flame test methods - Summary and relevance;
--- Part 21. Abnormal heat - Ball pressure test;
--- Part 22. Test flames - 50W flames - Apparatus and confirmation test methods;
--- Part 23. Test flames tubular material 500W vertical flame test methods for the polymerization;
--- Part 24. Guidance for assessing the fire hazard insulating liquid;
--- Part 25. Smoke obscuration - General;
--- Part 26. Smoke obscuration - Summary and relevance of test methods;
--- Part 27. Smoke obscuration - Small-scale static test instrument described;
--- Part 28. Smoke obscuration - Small-scale static test material;
--- Part 29. Heat release - General;
--- Part 30. Heat release - Summary and relevance of test methods;
--- Part 31. Surface spread of flame - General;
--- Part 32. Heat release heat insulating fluid is released;
--- Part 33. Guidance for assessing the fire hazard from flammable General;
--- Part 34. Guidance for assessing the fire hazard from flammable Test methods - Summary and relevance;
--- Part 35. General corrosion of combustion flow hazards;
--- Part 36. corrosive combustion flow hazards Summary and relevance of test methods;
--- Part 38. Toxicity Test Methods for combustion flows Summary and relevance;
--- Part 39. Toxicity test results illustrate the use and combustion stream;
--- Part 40. Toxic poison flow combustion efficiency device and test methods for assessment;
--- Part 41. Toxicity toxic combustion flow calculation and assessment of the effectiveness of the test results described;
--- Part 42. Test flames Confirmation Test Guidelines;
--- Part 44. Guidance for assessing the fire hazard fire hazard assessment.
This section GB/T 5169 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 5169.1-2007 "Fire hazard testing for electric and electronic products - Part 1. Terminology concerning fire tests", and
GB/T 5169.1-2007 compared to the main technical changes are as follows.
--- Added "project" of terms defined separately (see 3.1);
--- Removed some terms (see 3.2, 2007 Edition Chapter 3).
This section uses the translation method is equivalent to using IEC 60695-4.2012 "Fire hazard testing - Part 4. Electrical Products Fire Test surgery
language".
This part made the following editorial changes.
--- Consistent with the existing standard series, the standard name will be changed to "Fire hazard testing for electric and electronic products - Part 1. Fire Test
the term";
--- Deleted the last two paragraphs of Chapter 1 of informative content;
--- Increase the "References" section in Chapter 2 and guidelines for the preparation of international standards IEC Guide104.2010 and ISO /IEC
Guide51.1999 to "References."
This part is proposed by the China Electrical Equipment Industrial Association.
This section hazard testing Standardization Technical Committee (SAC/TC300) is administered by the National Electrical and Electronic Products fire.
This section is responsible for drafting units. China Electric Apparatus Research Institute Limited.
Participated in the drafting of this section. CIQ Shenzhen, Dongguan City, the Hua Electronic Technology Co., Ltd, China Quality Certification Center,
Weikai Detection Technology Co., Ltd., Shunde District of Foshan City, New Materials Co., harmony, Beijing Terrett Detection Technology Services LLC,
Ministry of Industry and Information Technology Institute of Electronics V, Guangdong Entry-Exit Inspection and Quarantine Bureau Technology Center, Southern Jiangsu Wuxi Test Equipment Co.,
Division, Chinese Academy of household appliances.
The main drafters of this section. Wu Qian, Bi Kaijun, Liguang Bin, Wang Ruifeng, Chen Lanjuan, Chen Xin, kaolinite pine, Zhangyuan Qin, Wu Zheng, Ni Yiming,
Wancheng.
This section was first released in 1985, 1997 and the first amendment, the Second Amendment in 2007, this is the third revision.
Fire hazard testing for electric and electronic products
Part 1. Terminology concerning fire tests
1 Scope
GB/T 5169, as defined in this part of the terms and definitions apply to fire hazard testing for electric and electronic products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
IEC 60050-195 1989 International Electrotechnical Vocabulary - Part 195. electrical connection and put the electric shock protection (Internationalelectro-
technicalVocabulary-Part 195. Earthingandprotectionagainstelectricshock)
ISO /IEC 13943.2008 Fire Safety Glossary (Firesafety-Vocabulary)
3 Terms and Definitions
3.1 The term "Project"
"Project" in this document generally represents a combination of a single object or multiple objects, according to the individual requirements of the definition, can include, for example. materials, production
Products, assembly, structure or building. If the "Project" research is a sample, then the use of the term "sample."
3.2 Other terms and definitions
The following terms and definitions apply to this document.
Note. For ease of use, electrical and electronic specialty specific and ISO /IEC 13943.2008 terms and definitions section provisions set forth below.
3.2.1
Abnormal heat abnormalheat
< Electrical Electronics Professional> when used under normal conditions may cause additional heat generated by the fire.
[ISO /IEC 13943.2008, the definition 4.1]
3.2.2
Arc resistance arcresistance
Ability < Electrical Electronics Professional> under specified conditions, the electrically insulating material to resist the impact of the arc.
NOTE. arc resistance by the arc length of the conductive path exists and the sample cause a fire or other hazards defined.
[ISO /IEC 13943.2008, definitions 4.13]
3.2.3
Arc tracking arctracking
To tracking tracking
< Electrical Electronics Professional> under the combined effect of electrical stress and electrolytic impurities, solid insulating material surface and/or internal conductive paths gradually
form.
See. proof tracking (3.2.27).
|