|
US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5167-2018: Sintered metal materials and hard metals -- Determination of electrical resistivity
Status: Valid GB/T 5167: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5167-2018 | English | 119 |
Add to Cart
|
3 days [Need to translate]
|
Sintered metal materials and hard metals -- Determination of electrical resistivity
| Valid |
GB/T 5167-2018
|
| GB/T 5167-1985 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Sintered metal materials and hardmetals. Determination of electrical resistivity
| Obsolete |
GB/T 5167-1985
|
PDF similar to GB/T 5167-2018
Standard similar to GB/T 5167-2018 GB/T 3655 GB/T 5162 GB/T 4339 GB/T 6148 Basic data | Standard ID | GB/T 5167-2018 (GB/T5167-2018) | | Description (Translated English) | Sintered metal materials and hard metals -- Determination of electrical resistivity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H21 | | Classification of International Standard | 77.160 | | Word Count Estimation | 6,659 | | Date of Issue | 2018-09-17 | | Date of Implementation | 2019-06-01 | | Older Standard (superseded by this standard) | GB/T 5167-1985 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 5167-2018: Sintered metal materials and hard metals -- Determination of electrical resistivity
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sintered metal materials and hardmetals - Determination of electrical resistivity
ICS 77.160
H21
National Standards of People's Republic of China
Replace GB/T 5167-1985
Determination of resistivity of sintered metal materials and cemented carbides
Published on.2018-09-17
2019-06-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 5167-1985 "Determination of resistivity of sintered metal materials and cemented carbides".
Compared with GB/T 5167-1985, the main technical contents of this standard are changed as follows.
--- Added Chapter 1 "Scope";
--- Added Chapter 2 "Regular References";
--- Remove the terminology description for the 1985 version;
--- Chapter 4 "Instruments" increases the range and accuracy requirements of vernier calipers, lever micrometers, thermometers, precision balances;
--- Chapter 6, "Measurement Results and Calculations" adds "mass resistivity" and "unit length resistance";
--- Chapter 7 "Temperature Correction" was changed to "Correction of Resistance Value";
--- Chapter 8, "Test Report" optimizes and supplements related content.
This standard was proposed by the China Nonferrous Metals Industry Association.
This standard is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243).
This standard is drafted by. Institute of Powder Metallurgy, Central South University, Shenzhen Yingcheng Technology Co., Ltd., Nonferrous Metals Technology
Research Institute.
The main drafters of this standard. Huang Zhifeng, Yu Shenglin, Zhang Yue, Zheng Lingzhi, Mo Zikai.
The previous versions of the standards replaced by this standard are.
---GB/T 5167-1985.
Determination of resistivity of sintered metal materials and cemented carbides
1 Scope
This standard specifies the determination of the electrical resistivity of sintered metal materials and cemented carbides.
This standard applies to the following two methods for determining the electrical resistivity of sintered metal materials and cemented carbides.
a) A measurement accuracy of less than 0.30%, suitable for accurate determination of the basic properties of the material;
b) A low measurement accuracy for quality control in industrial production processes.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1216 outer diameter micrometer
GB/T 3850 dense sintered metal material and method for determination of density of cemented carbide
GB/T 21389 cursor, table and digital caliper
3 sample
3.1 The specimen may be a rod, strip or profile, and its diameter, thickness, width or other dimensions shall be compatible with the measuring range of the selected instrument, and
The surface should be uniform and the cross-sectional area should not change by more than 0.75%.
3.2 The resistance within the length of the sample measurement shall be not less than 0.00001 Ω. For accurate measurement, the sample shall be ground and polished to a diameter of 6.4 mm.
The length is 254mm; for general measurement, the distance of the potential contact of the sample should be not less than 12.70mm, and the cross section is uniform.
3.3 The surface of the sample shall be free of scale, dirt and oil. There shall be no cracks or defects. The test shall not allow overlap and weld.
4 instruments
4.1 When the sample resistance is less than 1Ω, measure the resistance with the Calvin double-arm bridge; when the sample resistance is 1Ω or more, use the Wheatstone bridge
Measure the resistance.
4.2 Vernier caliper. (1000 ± 0.1) mm, should meet the requirements of GB/T 21389. Lever micrometer. the indication error of the meter does not exceed
1μm, should meet the requirements of GB/T 1216.
4.3 Thermometer. The indication error does not exceed 0.1 °C.
4.4 Precision balance. The division value is 0.1mg.
5 measurement process
5.1 Measuring the length and quality of the sample, the measurement error of the instrument used is not more than ± 0.05%. In order to ensure the accuracy requirements of the measurement length,
The potential contact should have a sharp edge. When it is in contact with the potential contact of the sample, it should have a proper clamping force to ensure stable and reliable contact.
5.2 When measuring the cross-sectional area of the sample, the cross-sectional area is measured 5 times or more in equidistant distance within the gauge length of the sample, and the average value is taken. test
The sample size does not change by more than 0.10%. If the sample size is less than 2.54mm and the measurement accuracy does not meet the specified accuracy requirements, the sample is cut off.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5167-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 5167-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5167-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5167-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 5167-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5167-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|