|
US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45739-2025: Dimensions of gaseous oxygen charging connector for aerospace
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45739-2025 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
Dimensions of gaseous oxygen charging connector for aerospace
| Valid |
GB/T 45739-2025
|
Standard similar to GB/T 45739-2025 GB/T 45847 GB/T 44911 Basic data | Standard ID | GB/T 45739-2025 (GB/T45739-2025) | | Description (Translated English) | Dimensions of gaseous oxygen charging connector for aerospace | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V44 | | Classification of International Standard | 49.090 | | Word Count Estimation | 10,190 | | Date of Issue | 2025-05-30 | | Date of Implementation | 2025-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45739-2025: Dimensions of gaseous oxygen charging connector for aerospace---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 49.090
CCSV44
National Standard of the People's Republic of China
Dimensions of gaseous oxygen filling connectors for aerospace use
Released on 2025-05-30
2025-12-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is modified to adopt ISO 8775.1988 "Gaseous oxygen filling connectors for aerospace fluid systems (new type) Dimensions (inches)"
series)".
A new chapter “Terms and Definitions” has been added to this document.
The technical differences between this document and ISO 8775.1988 and their reasons are as follows.
--- The normative references GB/T 131 replaced ISO 1302 and GB/T 1182 replaced ISO 1101 (see Table 1) to adapt to our
The technical conditions of the country and improve operability;
--- Added the matching dimensions of the British threaded oxygen filling joint (see Figure 2) to meet the actual situation in my country;
--- Added the thread requirements for British standard threaded oxygen-filled joints (see 4.2) to meet the actual situation in my country.
The following editorial changes were made to this document.
--- Change the name of the standard to "Dimensions of Gaseous Oxygen Filling Connectors for Aerospace Use" to coordinate with the existing standards;
---Adapt illustrations according to national drawing standards.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the National Aircraft Standardization Technical Committee (SAC/TC435).
This document was drafted by. Hefei Jianghang Aircraft Equipment Co., Ltd., Xi'an Aircraft Design and Research Institute of China Aviation Industry Corporation,
Civil Aviation Administration of China Shanghai Aircraft Airworthiness Certification Center, Shenyang Aircraft Industry (Group) Co., Ltd., China Aviation Technology Research Institute,
AVIC General Aviation South China Aircraft Industry Co., Ltd. and Chengdu Aircraft Industry (Group) Co., Ltd.
The main drafters of this document are. Cui Huabao, Yang Bao, Liu Wenbiao, He Wang, Wang Bing, Shen Jiele, Pan Xin, Ren Xiujun, Hou Lihua, Dai Ying, Wei Weidong,
Li Xiaofeng, Wu Houtian, Ren Haitao, Zhao Lanlan, Tian Hong, Wan Dabo, Li Weihan, Liu Hui, and Zhu Jun.
Dimensions of gaseous oxygen filling connectors for aerospace use
1 Scope
This document specifies the general requirements for the fitting dimensions and operating space dimensions of gaseous oxygen filling connectors for aerospace applications.
This document applies to gaseous oxygen filling connectors for aerospace use.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 131 Product Geometry Specification (GPS) - Method of representation of surface structure in technical product documents (GB/T 131-2006,
ISO 1302.2002, IDT)
GB/T 1182 Product Geometry Technical Specification (GPS) Geometric Tolerances Shape, Orientation, Position and Runout Tolerances (GB/T 1182-
2018,ISO 1101.2017,MOD)
GB/T 7307 55° non-sealed pipe thread
ISO 725 ISO inch screw threads-Basic dimensions
ISO 3161 Aerospace UNJ threads general requirements and limit sizes (Aerospace-UNJthreads-Generalre-
3 Terms and definitions
There are no terms or definitions that require definition in this document.
4 Requirements
4.1 Oxygen filling connector matching dimensions
The dimensions of the mating end of the American threaded oxygen-filled joint shall comply with the requirements of Figure 1 and Table 1.
|