|
US$369.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 44819-2024: Method for determining the spontaneous combustion indicator gas and critical value in coal seams
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 44819-2024 | English | 369 |
Add to Cart
|
4 days [Need to translate]
|
Method for determining the spontaneous combustion indicator gas and critical value in coal seams
| Valid |
GB/T 44819-2024
|
Standard similar to GB/T 44819-2024 GB/T 51033 GB/T 50082 Basic data | Standard ID | GB/T 44819-2024 (GB/T44819-2024) | | Description (Translated English) | Method for determining the spontaneous combustion indicator gas and critical value in coal seams | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D09 | | Classification of International Standard | 13.100 | | Word Count Estimation | 18,192 | | Date of Issue | 2024-10-26 | | Date of Implementation | 2025-05-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 44819-2024: Method for determining the spontaneous combustion indicator gas and critical value in coal seams
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT44819-2024
ICS 13.100
CCSD09
National Standard of the People's Republic of China
Coal seam spontaneous combustion indicator gas and critical value determination method
value in coal seams
Released on October 26, 2024
Implementation on May 1, 2025
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Optimization method for gas indicators of spontaneous combustion in coal seams 3
4.1 Method Summary 3
4.2 Gas Chromatography Analysis of Spontaneous Combustion Indicators in Coal Seams 3
4.3 Optimization of gas indicators for spontaneous combustion in coal seams
5 Method for determining the critical value of spontaneous combustion gas in coal seams 3
5.1 Overview 3
5.2 Critical value determination content 3
5.3 Critical value investigation site 4
5.4 Field Observation Methods 4
5.5 Method for determining critical temperature 5
5.6 Critical value calculation method 6
5.7 Critical value determination procedure 7
Appendix A (Informative) Example of determining the critical value of spontaneous combustion of coal seams 8
A.1 Optimization of gas and indexes for spontaneous combustion of coal seams 8
A.2 On-site observation and parameter statistics 8
A.3 Critical temperatures T0, T1 and T2 9
A.4 CO critical value at T0 10
A.5 CO critical value at T1 11
A.6 Summary of Results 11
A.7 On-site assessment 11
Reference 12
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the China Coal Industry Association.
This document was drafted by. China University of Mining and Technology (Beijing), China Coal Technology and Engineering Group Shenyang Research Institute Co., Ltd., China Coal Research Institute
Co., Ltd., State Energy Group Wuhai Energy Co., Ltd., Kailuan (Group) Co., Ltd., China Academy of Safety Science and Technology,
University of Science and Technology Beijing, Huaneng Coal Technology Research Co., Ltd., and Shanxi Lu'an Chemical Group Yuwu Coal Industry Co., Ltd.
The main drafters of this document are. Zhu Hongqing, Liang Yuntao, Tan Bo, Tian Fuchao, Zhou Yong, Lu Xinxiao, Wu Jianguo, Zhou Fubao, Wang Haiyan, Song Shuanglin,
Sun Yong, Wang Wei, Li Feng, Long Zeng, Quan Hongxing, Hu Bing, He Mingxin, Ai Xing, Su Weiwei, Wang Haiyan (female), Lei Baiwei, Niu Huiyong, Wu Gang, Shi Bobo,
Qu Baolin, Li Rui, Li Tianze, and Xie Linhao.
introduction
my country has abundant coal resources, with many coal-forming periods and diverse geological characteristics of the coal seams. The distribution of mining areas for coal seams prone to spontaneous combustion and self-ignition is
The spontaneous combustion accidents in coal mines in recent years, as well as spontaneous combustion accidents in goaf and tunnel high-risk areas, have shown that due to the failure to
Failure to take timely countermeasures due to early warning of coal spontaneous combustion is one of the main causes of spontaneous combustion accidents.
Article 261, Article 7 and Article 52 of the Regulations on Fire Prevention and Extinguishing in Coal Mines stipulate that when mining coal seams prone to spontaneous combustion or spontaneous combustion, it is necessary to determine
Coal seam spontaneous combustion indicator gas and critical value, comprehensive analysis of the spontaneous combustion monitoring system, safety monitoring system and manual inspection results, select and confirm
Determine the natural combustion indicator gas and critical value, improve the natural combustion prediction and management system, and realize the early detection and early treatment of underground fire.
The relevant norms and method documents are missing. Therefore, this document optimizes the selection method of coal seam spontaneous combustion indicator gas and establishes a coal seam spontaneous combustion indicator gas selection method.
The ignition composite index gas judgment method is given, and the method for determining the critical value of coal seam spontaneous combustion indicator gas is given, which can be used as an early warning for coal spontaneous combustion fire accidents.
The technical basis for early warning and timely response measures.
Coal seam spontaneous combustion indicator gas and critical value determination method
1 Scope
This document provides a method for optimizing the gas indicators that indicate spontaneous combustion in coal seams in mines and a method for determining critical values.
This document is applicable to the monitoring, alarm, early warning and prevention of spontaneous combustion of coal seams in various types of mines, and is also applicable to spontaneous combustion of coal seams in other locations.
Prevention and treatment.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
AQ/T 1019 Gas Chromatographic Analysis of Spontaneous Combustion Indicators in Coal Seams and Optimization of Indicators
AQ1029 Coal Mine Safety Monitoring System and Testing Instrument Use Management Specification
AQ1044 Technical Specification for Fire Prevention and Extinguishing in Closed Mine
KA/T 757 General technical requirements for spontaneous combustion bundle pipe monitoring systems in coal mines
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Fire caused by the oxidation and heat storage of coal or other flammable materials.
[Source. AQ/T 1019-2006, 3.1]
3.2
The intrinsic property of coal's oxidizability at room temperature.
[Source. AQ/T 1068-2008, 3.1]
3.3
Fire gas firegas
A general term for the mixture of gases produced during the spontaneous combustion of coal.
[Source. AQ/T 1019-2006, 3.3]
3.4
Produced or changed due to spontaneous combustion, which can characterize the state and development trend of spontaneous combustion to a certain extent
Fire gas, hereinafter referred to as marker gas.
[Source. AQ/T 1019-2006, 3.4]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 44819-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 44819-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 44819-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 44819-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|