|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4390-2008: Wrench openings -- Tolerances for general use
Status: Valid GB/T 4390: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4390-2008 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Wrench openings -- Tolerances for general use
| Valid |
GB/T 4390-2008
|
| GB/T 4390-1995 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Spanner gaps and sockets--Metric series-tolerances for general use
| Obsolete |
GB/T 4390-1995
|
| GB 4390-1984 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Spanner gaps and sockets-metric series tolerances for general use
| Obsolete |
GB 4390-1984
|
PDF similar to GB/T 4390-2008
Basic data | Standard ID | GB/T 4390-2008 (GB/T4390-2008) | | Description (Translated English) | Wrench openings -- Tolerances for general use | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J47 | | Classification of International Standard | 25.140.30 | | Word Count Estimation | 7,745 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-09-01 | | Older Standard (superseded by this standard) | GB/T 4390-1995 | | Quoted Standard | GB/T 3103.1 | | Adopted Standard | ISO 691-2005, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.26 (Total No.139) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the common tolerance metric spanner wrench openings and holes shown in Figure 1. This standard applies to wrenching on the edge size metric bolts, screws and nuts (or similar parts) of wrenches and wrenches. | GB/T 4390-2008: Wrench openings -- Tolerances for general use---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wrench openings. Tolerances for general use
ICS 25.140.30
J47
National Standards of People's Republic of China
Replacing GB/T 4390-1995
Spanner wrench openings and holes tolerances for
(ISO 691.2005, Assemblytoolsforscrewsandnuts-
Wrenchandsocketopenings-Tolerancesforgeneraluse, MOD)
Posted 2008-12-30
2009-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 691.2005 "Assembly tools for screws and nuts wrench and socket openings - tolerances" (in English).
This standard is based on ISO 691.2005 redrafted. It lists the control of the standard terms and provisions of international standards in Appendix A a
Lanbiao.
Taking into account China's national conditions, in the use of ISO 691.2005, the standard of this made some changes. About the technical differences have been incorporated into the text,
And in terms of their margins involved are identified by a single vertical line. It gives a list of the technical differences and their reasons in Appendix B
Table for reference.
This standard and ISO 691.2005 The main differences are as follows.
--- Some of the statements apply to international standards to apply to our standard formulation;
--- Wrench opening dimension refers to the national standard GB/T 3103.1 (ISO 4759-1.2000, IDT) prescribed tolerance;
--- Deletion of the section on the sleeve, this section has been defined in GB/T 3390.1 "Manual socket wrench sleeve" in;
--- Deletion of the section on the ISO 691 mark.
This standard replaces GB/T 4390-1995 "metric spanner wrench openings and holes common tolerance."
This standard and GB/T 4390-1995 compared to the main changes are as follows.
--- The standard name be changed to "spanner wrench holes open and common tolerance" (1995 version of the cover, the cover of this edition);
--- Increased Normative references GB/T 3103.1 "Tolerances for fasteners - Bolts, screws, studs and nuts" (2nd edition
chapter);
--- The "spanner wrench hole openings and the maximum tolerance" to "spanner wrench holes open and common tolerance" (1995 edition Chapter 2,
Excerpts of chapter 3);
--- The "machined wrench holes and openings" with "Tolerance Series 1", the "non machined wrench hole" to "tolerance system
Column 2 "and in accordance with ISO 691. Provisions of the 2005 value was modified and adjusted (1995 Edition Chapter 2, 3rd edition
chapter).
Appendix A of this standard and Appendix B is an informative annex.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee, hardware tools, hardware sub-technical committee.
This standard by the Shanghai Industrial Tool Research Institute, Zhejiang billion foreign Tool Manufacturing Co., Ltd. is responsible for drafting, Jiangsu Sainty International Group Jiangdu Engineering
Co., Ltd, Hangzhou Qianjiang Hardware Tools Co., Ltd., Shanghai Star labor Tools Co., Ltd., Shanghai field Tool (Group) Co.,
The company, Deng Wei, Li tool Group Co., Ltd., Shanghai Shen Yu Hardware Tools Co., Ltd., Taizhou far Thailand Forging Tools Co., Ltd., Hebei
Park Safety Tool Group Co., Ltd. participated in the drafting.
Drafters of this standard. Wu teachings of our forefathers, Chenchang Qi, Weng Hang built Zoujia Ping, Chen Miao, Xu Shuguang, Panyu Jie, Liu Yuxin, Li Ruoci,
Chi Yan can, Yang Dongjiang, Gu Qing.
This standard replaces the standards previously issued as follows.
--- GB 4390-1984; GB/T 4390-1995.
Spanner wrench openings and holes tolerances for
1 Scope
This standard specifies the tolerances for metric spanner wrench openings and holes shown in Figure 1.
This standard applies to wrenching on the side dimension metric bolts, screws and nuts (or similar parts) of wrenches and wrenches.
a) wrench b) wrenches
Figure 1 wrenches and wrenches
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3103.1 Tolerances for fasteners - Bolts, screws, studs and nuts (GB/T 3103.1-2002, ISO 4759-1.2000,
IDT)
3 Common tolerance
Common Table tolerance wrenches open wrenches and wrench holes shown in Table 1 is based on GB/T 3103.1 provided for bolts, screws and
Nuts on the side and the development of tolerance.
Table 1 spanner wrench openings and holes in millimeters - tolerances
Edge dimension
Tolerance Tolerance Series 1 Series 2a
On the lower deviation deviation deviation lower deviation
2≤S < 3 +0.02 +0.08 +0.02 +0.12
3≤S < 4 +0.02 +0.10 +0.02 +0.14
4≤S < 6 +0.02 +0.12 +0.02 +0.16
6≤S < 10 +0.03 +0.15 +0.03 +0.19
10≤S < 12 +0.04 +0.19 +0.04 +0.24
12≤S < 14 +0.04 +0.24 +0.04 +0.30
14≤S < 17 +0.05 +0.27 +0.05 +0.35
17≤S < 19 +0.05 +0.30 +0.05 +0.40
19≤S < 26 +0.06 +0.36 +0.06 +0.46
26≤S < 33 +0.08 +0.48 +0.08 +0.58
33≤S < 55 +0.10 +0.60 +0.10 +0.70
55≤S < 75 +0.12 +0.72 +0.12 +0.92
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4390-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 4390-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 4390-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4390-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 4390-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4390-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|