|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43849-2024: Environmental test method for diving robot and components - Hydrostatic pressure test
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43849-2024 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Environmental test method for diving robot and components - Hydrostatic pressure test
| Valid |
GB/T 43849-2024
|
PDF similar to GB/T 43849-2024
Basic data | Standard ID | GB/T 43849-2024 (GB/T43849-2024) | | Description (Translated English) | Environmental test method for diving robot and components - Hydrostatic pressure test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A21 | | Classification of International Standard | 19.040 | | Word Count Estimation | 14,162 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-04-25 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43849-2024: Environmental test method for diving robot and components - Hydrostatic pressure test
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 19:040
CCSA21
National Standards of People's Republic of China
Basic environment of underwater robot complete machine and parts
Test method Hydrostatic pressure test method
Released on 2024-04-25
2024-04-25 implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Test equipment 2
5 Test conditions 2
6 Severity Level 3
7 Test Procedure 3
Appendix A (Informative) Table of Selection of Test Items for Hydrostatic Pressure Test Samples 6
References 7
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document was proposed by the China Machinery Industry Federation:
This document is under the jurisdiction of the National Technical Committee on Robotics Standardization (SAC/TC591):
This document was drafted by: Shenyang Institute of Automation, Chinese Academy of Sciences, Deep Blue Ocean Technology Co:, Ltd:, China Machinery Productivity Promotion Co:, Ltd:
Center, Beijing University of Posts and Telecommunications, Fujian Special Equipment Inspection Institute, Shenyang Siasun Robot Automation Co:, Ltd:, The Chinese University of Hong Kong
(Shenzhen), Shenyang Ziweiheng Testing Equipment Co:, Ltd:, Qingdao Luobofei Marine Technology Co:, Ltd:, Deep Sea Sapiens (Guangzhou) Technology Co:, Ltd:,
Harbin Engineering University, Dalian Maritime University, Dalian University of Technology, Chongqing Dexin Robot Testing Center Co:, Ltd:, China Automotive Research Institute Automotive Inspection Center
Xin (Changzhou) Co:, Ltd:, Guangzhou Radio and Television Metrology and Testing Co:, Ltd:, Nanjing Special Equipment Safety Supervision and Inspection Institute, Xuzhou Inspection
Shenzhen Institute of Artificial Intelligence and Robotics, Hohai University, Zhejiang Hengsheng Technology Co:, Ltd:, China Earthquake Emergency Search and Rescue Center
Xin, Luxi Kean Special Equipment Testing Co:, Ltd:, Chengdu Aerganglei Technology Co:, Ltd:, Beigaoyuan Technology Development (Beijing) Co:, Ltd:,
China Special Equipment Testing and Research Institute:
The main drafters of this document are: Gu Yan, Li Zhihai, Li Licheng, Zhang Ruitao, Zhang Ping, Zhang Yanheng, Huang Sibin, Zhang Feng, Ding Ning, Zhang Guangzhi, Li Lin,
Wei Jiancang, Feng Lei, Zhang Jinsheng, Wu Fusen, Sun Liangyan, Chen Yongyang, Fan Ping, Ma Yiming, Li Jun, Xu He, Fu Xianping, Xu Minyi, Zhu Ming, Yu Hongpeng,
Sun Tianfei, Zhang Zhipeng, Zhang Xiaojin, Lin Junjian, Wang Huifang, Wang Yong, Zhou Hongjun, Wang Yanjie, Wu Shanqiang, Yan Junli, Li Weihua, Hu Weijian,
Qin Hongde, Deng Zhongchao, Wei Ci, Zou Weitie, Fei Yong, Chen Guanru, Hu Sufeng:
Basic environment of underwater robot complete machine and parts
Test method Hydrostatic pressure test method
1 Scope
This document describes the hydrostatic pressure test method for the underwater robot and its components, and gives the hydrostatic pressure test method for the underwater robot
The test equipment and test conditions were designed, the severity level was proposed and the test process was established:
This document is applicable to the assessment or evaluation of the underwater robot and its components in deep water, shallow water, sea water or fresh water working environment:
Ability to adapt to static pressure environment:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 3766-2015 General rules and safety requirements for hydraulic transmission systems and their components
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
underwater robot divingrobot
When performing tasks, the robot's entire body is located below the water surface and in direct contact with the water:
3:2
Hydrostatic pressure
When an object is in an underwater environment, the pressure exerted on the surface of the object by liquid water in a non-flowing state:
3:3
Test Instructions
A technical document used to describe in detail the test sample information, test objectives, test methods, data recording and processing methods and other technical details:
3:4
Rated test pressure ratedtestpressure
The maximum test pressure required for the test sample during the hydrostatic pressure test:
3:5
Design pressure designpressure
The hydrostatic pressure to which an underwater robot is subjected when operating at its maximum designed water depth:
3:6
recovery
The treatment done to stabilize the performance of the test sample before the final test:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43849-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43849-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43849-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43849-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|