|
US$369.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43457-2023: Requirements for preparation and installation of space science experiment sample before launching
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43457-2023 | English | 369 |
Add to Cart
|
4 days [Need to translate]
|
Requirements for preparation and installation of space science experiment sample before launching
| Valid |
GB/T 43457-2023
|
Standard similar to GB/T 43457-2023 GB/T 42833 GB/T 42043 Basic data | Standard ID | GB/T 43457-2023 (GB/T43457-2023) | | Description (Translated English) | Requirements for preparation and installation of space science experiment sample before launching | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V40 | | Classification of International Standard | 49.020 | | Word Count Estimation | 18,146 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43457-2023: Requirements for preparation and installation of space science experiment sample before launching
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 49:020
CCSV40
National Standards of People's Republic of China
Preparation and preparation of space science experiment samples before launch
Installation requirements
Published on 2023-12-28
2024-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Preparation and installation principles 2
5 General requirements 2
5:1 Technical status management requirements 2
5:2 Security requirements 2
5:3 Ergonomic and medical requirements 3
5:4 Troubleshooting requirements 3
5:5 Documentation requirements 3
5:6 Recording requirements 3
6 Preparation requirements before experimental sample launch 3
6:1 Preparation process 3
6:2 Experimental sample transportation 5
6:3 Confirmation of the status of experimental equipment at the launch site 5
6:4 Experimental sample preparation 5
6:5 Experimental sample loading 6
6:6 Experimental waste disposal 7
6:7 Experimental unit integration 7
6:8 Experimental unit acceptance 7
6:9 Experimental unit transport 8
7 Installation requirements before experimental sample launch 8
7:1 Installation process 8
7:2 General requirements for installation of experimental samples 9
7:3 Experimental unit 9
7:4 Experimental setup 10
7:5 Experimental package 11
Appendix A (informative) Basic support conditions for launch sites and manned aircraft 12
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by the Chinese Academy of Sciences:
This document is under the jurisdiction of the National Standardization Technical Committee on Space Science and Its Applications (SAC/TC312):
This document was drafted by: Space Application Engineering and Technology Center of the Chinese Academy of Sciences, Shenzhen Institute of Advanced Technology of the Chinese Academy of Sciences, China Science and Technology
Center for Excellence in Molecular Plant Science of the College, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Institute of Mechanics, Chinese Academy of Sciences, Science in China
Institute of Hydrobiology, Institute of Metal Research, Chinese Academy of Sciences, Dalian Maritime University, Institute of Microbiology, Chinese Academy of Sciences, Beijing Space Vehicle
Overall Design Department:
The main drafters of this document: Tao Xin, Cang Huaixing, Zhao Liping, Huang Kun, Liu Wei, Zhang Wei, Liu Ying, Wang Yang, Lei Xiaohua, Zheng Huiqiong, Liu Fangwu,
Sun Shujin, Wang Gaohong, Luo Xinghong, Sun Yeqing, Huang Ying, Yu Jin, Tian Enjie, Wang Ran:
Preparation and preparation of space science experiment samples before launch
Installation requirements
1 Scope
This document stipulates the preparation and installation requirements for space science experiment samples before launch, including preparation and installation principles, overall requirements, accuracy
preparation requirements, installation requirements, etc:
This document applies to manned space life science and biotechnology, space material science, microgravity fluid physics and combustion science, space
Scientific research on basic physics, or pre-launch sample preparation and installation work for space science experiments with similar processes:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 2893:5 Graphic symbols safety colors and safety signs Part 5: Principles and requirements for the use of safety signs
GB/T 28875 Requirements for biological samples in space science experiments
GB/T 28877 General requirements for space science experiments
GB/T 29083 Safety requirements for flammable, explosive, toxic substances and radioactive sources in spacecraft
GB/T 30114:1 Space science and its applied terminology Part 1: Basic general
GB/T 32870 Technical requirements for loading biological samples in space science experiments
GB/T 35436 Standard module interface design specifications for space station scientific experiment cabinets
GB/T 35439 General requirements for safety, reliability and maintainability assurance of space station application payloads
GB/T 37469 Standards for the management of samples for scientific experiments on space materials
GB/T 38325 Ground verification requirements for space science experiments
3 Terms and definitions
The terms and definitions defined in GB/T 28877, GB/T 30114:1 and the following apply to this document:
3:1
sample preparationsamplepreparation
In order to obtain experimental samples that meet the requirements of space science experiments, effective methods are used to prepare, load and transport experimental samples:
and other activities:
3:2
sample loadingsampleloading
The activities of filling, transplanting, placing, and adding experimental samples and their auxiliary materials into the sample unit:
[Source: GB/T 32870-2016, 3:4, with modifications]
3:3
samplechamber
Carrying and accommodating experimental samples and their accessories, accessories, containers and experimental samples for conducting experiments in experimental units:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43457-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 43457-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43457-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43457-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|