| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43053-2023 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
| Valid |
GB/T 43053-2023
|
Standard similar to GB/T 43053-2023 GB/T 43869 GB/T 42319 Basic data | Standard ID | GB/T 43053-2023 (GB/T43053-2023) | | Description (Translated English) | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U65 | | Classification of International Standard | 47.020.70 | | Word Count Estimation | 194,173 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-01-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43053-2023: Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 47.020.70
CCSU65
National Standards of People's Republic of China
Maritime navigation and radiocommunication equipment and systems
Electronic Chart Display and Information System (ECDIS)
Operational and performance requirements, test methods and
Required test results
(IEC 61174.2015,MOD)
Published on 2023-09-07 Implemented on 2024-01-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅨ
1 Scope 1
2 Normative reference documents 1
3 Terms, definitions and abbreviations3
3.1 Terms and Definitions 3
3.2 Abbreviations 7
4 Minimum operating and performance requirements8
4.1 General 8
4.2 ECDIS definition 9
4.3 SENC information display 9
4.3.1 SENC 9
4.3.2 Application instructions for non-HO data sources9
4.3.3 Display category 9
4.3.4 Safety contour10
4.3.5 Safe water depth 10
4.3.6 Information content10
4.3.7 Confirmation and Update 10
4.3.8 Information related to chart targets10
4.3.9 Display scale 10
4.4 Provision and update of nautical chart information 11
4.4.1 Contents of SENC11
4.4.2 Update 11
4.5 ratio 11
4.6 Display of other navigation information 11
4.6.1 General requirements 11
4.6.2 Radar information12
4.6.3 AIS information 14
4.6.4 AIS target data 16
4.6.5 AIS navigation related data 16
4.6.6 AISCPA/TCPA alarm 17
4.6.7 AIS lost target warning 17
4.6.8 Anchor monitoring 17
4.7 Display mode and generation of adjacent areas 18
4.8 Colors and symbols 18
4.9 Display requirements 18
4.9.1 Route design and monitoring18
4.9.2 Chart display size 18
4.9.3 Color and resolution 19
4.9.4 Display 19
4.9.5 Deletion of information type 19
4.10 Route design, monitoring and navigation records19
4.10.1 General requirements 19
4.10.2 Route design 19
4.10.3 Route monitoring 20
4.10.4 Location integration 21
4.10.5 Target information 22
4.10.6 LOP positioning 22
4.10.7 Voyage records 22
4.11 Calculation and accuracy 22
4.12 Connections to other devices (interfaces) 23
4.12.1 Connecting with navigation equipment 23
4.12.2 Connecting with BAM 23
4.12.3 Connecting to VDR 24
4.12.4 Connecting with BNWAS 24
4.12.5 Connecting with SENC information 24
4.12.6 NAVTEX and SafetyNet for MSI connections 25
4.12.7 Connection for route information transmission 25
4.12.8 Connecting to INS 26
4.13 Performance test, fault alarm and indication 26
4.14 Backup device 26
4.15 Power 26
4.16 Software maintenance 26
4.17 Quality management requirements 26
4.18 Default control settings and saved user control settings 27
5 Requirements contained in IHO publications 29
5.1 Priority of chart display 29
5.2 Chart information display 30
5.2.1 Scale and navigation objectives30
5.2.2 Units and Legend 30
5.2.3 Terminology 30
5.3 Chart function 31
5.3.1 Cursor selection 31
5.3.2 Navigation information31
5.3.3 Date-related ENC goals31
5.4 Alias function 31
5.4.1 Additional crew information31
5.4.2 Additional non-HO information32
5.4.3 Tidal adjustment 32
5.5 Use of display libraries 32
5.5.1 Display library 32
5.5.2 Test chart 33
5.6 Display characteristics 33
5.7 Performance requirements 33
5.7.1 Redraw 33
5.7.2 Resolution 33
5.7.3 Symbol 33
5.7.4 Number of colors 34
5.7.5 Brightness and Contrast 34
5.8 Ergonomic requirements 34
5.8.1 Mode and direction 34
5.8.2 Window 34
5.9 Chart information update 35
5.9.1 General 35
5.9.2 Manual update 36
5.9.3 Semi-automatic updates 36
5.9.4 Receiving updates 36
5.9.5 Sequence Check 37
5.9.6 Consistency check 37
5.9.7 Geographical applicability 37
5.9.8 Summary report 37
5.9.9 ENC update review 37
5.9.10 Update Fix 37
5.10 Operating area 38
5.11 External removable storage media38
6 Test methods and required test results38
6.1 Installation, technical documentation and testing requirements for the equipment under test38
6.2 Interface 38
6.2.1 General requirements 38
6.2.2 BAM interface 39
6.2.3 VDR interface 40
6.2.4 BNWAS interface 40
6.3 General requirements and display requirements 40
6.3.1 General requirements 40
6.3.2 Display requirements 41
6.4 Preparation 41
6.4.1 Power on 41
6.4.2 Initial ship parameters 41
6.4.3 Required test data 41
6.5 ENC chart related requirements 42
6.5.1 General requirements 42
6.5.2 Display library 42
6.5.3 ENC 42
6.5.4 Encrypted ENC 42
6.6 Accuracy 42
6.7 Visual requirements 42
6.7.1 Symbol 42
6.7.2 Terminology, units and legends 42
6.7.3 Color table 43
6.7.4 Resolution 43
6.7.5 Display characteristics 43
6.8 Functional requirements 43
6.8.1 Test method 43
6.8.2 Standard display 43
6.8.3 Basic display 43
6.8.4 All other information 44
6.8.5 View group layer and text group layer 44
6.8.6 Display priority 44
6.8.7 Additional display functions 44
6.8.8 Scale and navigation objectives 44
6.8.9 Mode and direction 44
6.8.10 Safety contour 45
6.8.11 Safe water depth 45
6.8.12 Cursor selection 45
6.8.13 Navigation related functions 45
6.8.14 Location integration 45
6.8.15 Radar and other navigation information 46
6.8.16 Loading corrupted data 48
6.8.17 Automatic update 48
6.8.18 Manual update 48
6.8.19 Self-test of main functions 49
6.8.20 Operating area 49
6.8.21 External removable storage media 50
6.9 Operating requirements 50
6.9.1 Principles of Ergonomics 50
6.9.2 Route design 50
6.9.3 Route monitoring 51
6.9.4 12h log 53
6.9.5 Voyage records 53
6.9.6 Power supply 53
6.9.7 LOP positioning 53
6.10 Software maintenance 54
6.11 Quality Management 54
6.12 Default control settings and saved user control settings 54
6.13 AIS information and AIS target data 54
6.13.1 General 54
6.13.2 AIS target and data recording capacity 54
6.13.3 AIS target filtering 55
6.13.4 Activation and dormancy of AIS targets 55
6.13.5 AIS function and display 55
6.13.6 AIS target data 56
6.13.7 AISCPA/TCPA alarm 57
6.13.8 AIS lost target warning 57
6.14 AIS navigation related data 57
6.15 Anchor monitoring 58
6.16 NAVTEX and SafetyNet for MSI connections 58
6.17 Route information transmission interface 58
6.18 Interface with INS 59
Appendix A (Normative) SENC information displayed in route planning and route monitoring 60
Appendix B (Normative) Navigation elements and parameters 61
Appendix C (Normative) Geographic areas with special conditions 62
Appendix D (Normative) Alarms and Instructions 63
Appendix E (Normative) Mandatory terms and abbreviations 65
Appendix F (Normative) Backup Device 72
Appendix G (Normative) ECDIS 83 for RCDS operating mode
Appendix H (normative) Alarms and indications in RCDS operating mode 102
Appendix I (Normative) Scheme Definition and Plotting 103
Appendix J (Informative) Geodetic Calculation Guide 110
Appendix K (Informative) Test Guide 113
Appendix L (informative) ENC update status report example 114
Appendix M (normative) Composition of electronic chart database 118
Appendix N (informative) Use cases of safety contours and safe water depth 128
Appendix O (informative) Guidelines for the use of electronic chart systems in polar waters 129
Appendix P (normative) Options for polar regions above 85° north latitude 130
Appendix Q (normative) IEC 61162 interface 137
Appendix R (informative) Conversion between IEC 61162-1 statements and IEC 61162-3 parameter group numbers 144
Appendix S (Normative) Route Design Exchange Format-RTZ 146
Appendix T (Normative) Report route transmission interface 168
Appendix U (normative) Statements used by SafetyNET 170
Appendix V (normative) TTD statement extension, protocol version 1 180
Appendix W (Normative) Symbol 181
Reference 182
Figure F.1 Backup system logical interface 76
Figure I.1 Route composition definition 103
Figure I.2 Route 105 of Option 2
Figure I.3 Route 106 of Option 3
Figure I.4 Route 109 of Option 4
Figure L.1 ENC update status report (overview section) example 114
Figure L.2 Complete ENC update status report example 115
Figure L.3 ENC route update status report example 117
Figure P.1 Table usage example 130
Figure Q.1 ECDIS logical interface 137
Figure Q.2 ECDIS warning non-escalated alarm record 141
Figure Q.3 Alarm record of ECDIS warning upgraded to alarm 141
Figure Q.4 Alarm record of ECDIS remote acknowledgment of alarm 142
Figure Q.5 Alarm record of ECDIS remote acknowledgment of alarm 142
Figure Q.6 Alarm record of ECDIS remote acknowledgment of alarm 143
Figure Q.7 Alarm record of ECDIS remote acknowledgment of alarm 143
Figure S.1 Representation of route design---distance between WP2 and WP3 146
Figure S.2 Representation of route design---segment range of WP3 147
Figure S.3 UML diagram 167
Figure T.1 Example of route transmission timing 168
Figure T.2 RRT statement example 169
Figure U.1 SM1 statement format 170
Figure U.2 SM2 statement format 172
Figure U.3 SM3 statement format 174
Figure U.4 SM4 statement format 176
Figure U.5 SM5 statement format 178
Table 1 Tracking target display capability12
Table 2 AIS display processing capabilities 14
Table 3 Default control settings [Appendix 6 in IMOMSC.252(83).2007] 27
Table 4 Definition of “Performance Check” and “Performance Test” 41
Table 5 Initial ship parameters 41
Table D.1 Alarms and indications required by IMO 63
Table D.2 Alarms and indications specified in this document64
Table E.1 Chart display terminology 65
Table E.2 Main functional terms 67
Table E.3 Basic display terminology 69
Table E.4 Terms related to routes, route monitoring or route design70
Table F.1 Parameters of EUT simulation test input 78
Table H.1 Alarms and indications in RCDS operating mode 102
Table I.1 Boston to Rotterdam Rectangular Line/Great Circle Route Atlantic Track 104
Table I.2 Composite track 105 of scheme 2
Table I.3 Composite track 106 of scheme 3
Table I.4 Composite trajectory of scheme 4107
Table J.1 Rectangular line distance 110
Table J.2 Great circle distance deviation 111
Table M.1 ECDIS View Group Level Crew Option Minimum Requirements 118
Table M.2 Minimum requirements for ECDIS text layer group options 119
Table P.1 Space control point starting from 85°N, 0°E 131
Table P.2 Space control point 132 starting from 87°N, 0°E
Table P.3 Space control point starting from 89°N, 0°E 134
Table P.4 Spatial control points starting from 90°N, 0°E, 180°E as the starting point of relative orientation 135
Table Q.1 Statements forced to be received by ECDIS 137
Table Q.2 ECDIS optional received statements 138
Table Q.3 Statements forced to be sent by ECDIS 139
Table Q.4 ECDIS optional sent statements 139
Table Q.5 Information forced to be sent to the VDR 139
Table Q.6 Messages between ECDIS and backup ECDIS systems 140
Table R.1 Conversion of IEC 61162-1~IEC 61162-3 144
Table R.2 Conversion of IEC 61162-3~IEC 61162-1 144
Table S.1 Properties of RouteInfo node information storage 149
Table S.2 Attributes of Waypoint node information storage 151
Table S.3 Properties of Position node information storage 151
Table S.4 Attributes of Leg node information storage 152
Table S.5 Properties of ScheduleElement node information storage 153
Table S.6 Attributes of Extension node information storage 155
Table V.1 TTD Statement Protocol Version 1 180
Table W.1 Anchor monitoring symbols 181
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is modified to adopt IEC 61174.2015 "Maritime navigation and radiocommunication equipment and systems Electronic chart display and information system"
(ECDIS) Operational and Performance Requirements, Test Methods and Required Test Results".
The technical differences between this document and IEC 61174.2015 and their reasons are as follows.
---Delete 3.1.32 and add the abbreviation RTS in 3.2 for ease of use;
---Add CPA, TCPA, IHB, and NAVTEX to the abbreviations in 3.2 for ease of use;
--- Figure I.2 in normative appendix I has been deleted. The example track chart in the North Atlantic is not applicable to my country's national conditions.
The following editorial changes have been made to this document.
---Deleted the note before G.1 in Appendix G;
---Deleted Figure J.1, Figure J.2, Figure N.1 and Figure N.2.
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed and coordinated by the National Standardization Technical Committee for Ship Electrical and Electronic Equipment (SAC/TC531).
This document was drafted by. China State Shipbuilding Corporation, Comprehensive Technical and Economic Research Institute, Wuhan University of Technology, Taizhou Jinhai Shipping
Equipment Co., Ltd., the 707th Research Institute of China State Shipbuilding Corporation, Beijing Institute of Technology, CCCC National Dredging Technology and Equipment
Engineering Research Center Co., Ltd., China State Shipbuilding Corporation Ltd. 704 Research Institute, Headway Technology Group (Qingdao) Co., Ltd., Zhoushan
Municipal Quality and Technical Supervision and Inspection Institute.
The main drafters of this document. Zhao Chenning, Zhang Jingjing, Liu Jingxian, Liu Wen, Li Liang, Yang Yuting, Zhao Yan, Du Changhao, Luo Xiubo, Chu Shandong,
Sun Peng, Zheng Jiaming, Wang Shuo, Yang Bo, Zhou Yumiao, Fu Pengfei, Li Bo, Chen Chen, Lai Junxing, Yang Qianqian.
Maritime navigation and radiocommunication equipment and systems
Electronic Chart Display and Information System (ECDIS)
Operational and performance requirements, test methods and
Required test results
1 Scope
This document specifies the operational and performance requirements, test methods and required testing of Electronic Chart Display and Information System (ECDIS) equipment.
As a result, the performance of these devices is not less than the requirements in resolution IMOMSC.232(82).
This document is based on the performance standards of resolution IMOMSC.232(82) and is related to resolution IMOA.694(17) and IEC 60945.discretionary
Please refer to resolution IMOMSC.232(82) for details.
Related to the above resolution IMOMSC.232(82) are the International Hydrographic Organization (IHO) publications 1). IHOS-32, IHOS-
52, IHOS-57, IHOS-61, IHOS-63 and IHOS-64.This document summarizes the content of the above publications applicable to ECDIS equipment.
OK excerpt.
(232/A2.1) These performance requirements should apply to all ECDIS equipment installed on ships of all types, including.
---Dedicated independent workstation;
---A multi-function workstation as part of the Integrated Navigation System (INS).
(232/A2.2) These performance requirements apply to ECDIS operating mode, operating in RCDS operating mode as specified in Appendix G
ECDIS and ECDIS backup devices specified in Appendix F.
(232/A2.3) The structure and format requirements of chart data, encryption and representation of chart data are all within the scope of relevant IHO standards, including
Includes those standards listed in normative references.
The requirements of this document do not restrict the use of new technologies for equipment and systems. It is necessary to ensure that the performance of the facilities provided is not lower than that specified in this document.
Require.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
IEC 60945 General requirements for maritime navigation and radiocommunication equipment and systems Test methods and required test results
Note. GB/T 15868-1995 Global Maritime Distress and Safety System (GMDSS) General Requirements Test Method for Marine Radio Equipment and Maritime Navigation Equipment
and required test results (IEC 60945.1994, IDT)
IEC 61162-1 Digital interfaces for maritime navigation and radiocommunication equipment and systems Part 1.Single and multiple receivers
IEC 61162-450 Digital interfaces for maritime navigation and radiocommunication equipment and systems Part 450.Multiple microphones and multiple receivers
|