|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42523-2023: Iron ore fines - Determination of moisture capacity
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42523-2023 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Iron ore fines - Determination of moisture capacity
| Valid |
GB/T 42523-2023
|
PDF similar to GB/T 42523-2023
Basic data | Standard ID | GB/T 42523-2023 (GB/T42523-2023) | | Description (Translated English) | Iron ore fines - Determination of moisture capacity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D31 | | Classification of International Standard | 73.060.10 | | Word Count Estimation | 14,180 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 42523-2023: Iron ore fines - Determination of moisture capacity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 73:060:10
CCSD31
National Standards of People's Republic of China
Method for determination of wet capacity of iron ore powder
Released on 2023-05-23
2023-12-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Iron and Steel Industry Association:
This document is under the jurisdiction of the National Iron Ore and Direct Reduced Iron Standardization Technical Committee (SAC/TC317):
This document is drafted by: Chongqing University, Chongqing Institute of Science and Technology, Laiwu Branch of Shandong Iron and Steel Co:, Ltd:, Baoshan Iron and Steel Co:, Ltd:
Company, CCID Information Technology (Chongqing) Co:, Ltd:, Chongqing Iron and Steel Co:, Ltd:, Chengdu Advanced Metal Materials Industry Technology Research Institute
Co:, Ltd:, Shougang Jingtang Iron and Steel United Co:, Ltd:, Pangang Group Panzhihua Iron and Steel Research Institute Co:, Ltd:, Kunming Industrial Occupational
Technology College, Handan Iron and Steel Group Co:, Ltd:, Metallurgical Industry Information Standard Research Institute:
The main drafters of this document: Lu Xuewei, Huang Qingyun, You Yang, Xu Jian, Li Gang, Liang Dong, Zhou Maojun, Xie Hao, Wang Gang, Wang Kai, Pan Cheng,
Yang Mingrui, Hu Peng, Wu Wangping, Zhao Wei, Zhang Xiaolei, Lin Anchuan, Hou Jian, Huang Xiaobo, Wu Jianlong, Sun Xiaodong, Xu Can, Chen Zibin, Zhu Rong, Yao Qianguang,
Xiang Junyi, He Wenchao, Chen Meijin:
Method for determination of wet capacity of iron ore powder
Caution --- Personnel using this document should have practical experience in formal laboratory work: This document does not address all possible safety issues
question: It is the user's responsibility to take appropriate safety and health measures and ensure compliance with the conditions stipulated in the relevant national laws and regulations:
1 Scope
This document describes a method for the determination of the wet capacity of iron ore fines:
This document applies to the determination of the wet capacity of iron ore concentrates and iron ore powders with a particle size greater than 10mm and a mass ratio of no more than 10%:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 1914-2017 Chemical Analysis Filter Paper
GB/T 6003:1 Test sieve technical requirements and inspection Part 1: Metal wire mesh test sieve
GB/T 6005 Basic dimensions of test sieve wire mesh, perforated plate and electroformed sheet sieve
GB/T 6730:1 Preparation of pre-dried samples for iron ore analysis
GB/T 10322:1 Iron ore sampling and sample preparation methods
GB/T 10322:7 Sieve determination of particle size distribution of iron ore
GB/T 20565 Terminology of iron ore and direct reduced iron
3 Terms and Definitions
The following terms and definitions defined in GB/T 20565 apply to this document:
3:1
wet capacity moisturecapacity
The mass percentage of the maximum water content (physical water) that minerals can maintain in the state of natural accumulation to the mineral dry material:
Note: Expressed in percentage (%):
3:2
The maximum water content that a mineral can hold in its natural accumulation state:
Note: The unit is grams (g):
3:3
Water absorption ratewaterabsorptionrate
The mass of water in minerals that enters the natural accumulation state under capillary force per unit time:
Note: The unit is grams per second (g/s):
3:4
The mass transfer distance of water per unit time under the action of capillary force in the particle bed:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42523-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42523-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 42523-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42523-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|