HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 41913-2022 English PDF

US$339.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41913-2022: General specification for gyro motor
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 41913-2022English339 Add to Cart 4 days [Need to translate] General specification for gyro motor Valid GB/T 41913-2022

PDF similar to GB/T 41913-2022


Standard similar to GB/T 41913-2022

GB/T 22712   GB/T 39631   JB/T 9542   GB/T 16439   GB/T 13537   

Basic data

Standard ID GB/T 41913-2022 (GB/T41913-2022)
Description (Translated English) General specification for gyro motor
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K24
Classification of International Standard 29.160.30
Word Count Estimation 18,175
Date of Issue 2022-10-14
Date of Implementation 2023-05-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 41913-2022: General specification for gyro motor

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for gyro motor ICS 29.160.30 CCSK24 National Standards of People's Republic of China General Technical Specification for Gyro Motors Published on 2022-10-12 2023-05-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Basic parameters 2 5 Technical requirements and test methods 2 6 Inspection rules 10 7 Delivery preparation 13 8 User Services 13 Table 1 Voltage and Frequency 2 Table 2 Start time5 Table 3 Vibration7 Table 4 Shock 8 Table 5 Constant damp heat8 Table 6 Inspection items and sequence 10

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Micromotor Standardization Technical Committee (SAC/TC2). This document is drafted by. Xi'an Micromotor Research Institute Co., Ltd., Nantong University, Hefei Deheng Optoelectronics Technology Co., Ltd., Xiamen Sun Top Electric Technology Co., Ltd., Liyang Elevator Engineering Co., Ltd., Deqing Jiefeng Electric Co., Ltd., Guangdong Jinya Technology Co., Ltd., Dongguan City Sanhang Military-Civilian Integration Innovation Research Institute, Zhejiang Best Electric Co., Ltd., Guangdong Liying Intelligent Technology Co., Ltd., Shaanxi Aerospace Times Navigation Equipment Equipment Co., Ltd., Blue Arrow Aerospace Technology Co., Ltd., Shanghai Blue Arrow Hongqing Technology Co., Ltd., University of Electronic Science and Technology of China, Chengdu Weijing Electric Co., Ltd. Machinery Co., Ltd., Ningbo Yahui Intelligent Technology Co., Ltd., Yiwu Laojin Mould Co., Ltd., Shaanxi Yuntuo Electric Co., Ltd., Shaanxi Zhiheng Electrical Technology Co., Ltd. The main drafters of this document. Wang Yinbo, Gu Juping, Duan Ping, Ni Liaoyong, Zhang Zaichun, Wang Qijie, Zhang Dejun, Wei Kunping, Liu Yaorong, Ding Chunyan, Liu Wu, Zhang Changwu, Liu Jian, Zhang Man, Xie Hongqin, Shi Lijun, Jia Bo, Chen Naien, Jin Qinghe, Zheng Haifeng, Pingge. General Technical Specification for Gyro Motors

1 Scope

This document specifies the basic parameters, technical requirements and test methods, inspection rules, delivery preparations and user services of gyro motors. This document applies to the design, production, testing and acceptance of asynchronous, synchronous hysteresis, and permanent magnet synchronous gyro motors.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 2423.1-2008 Environmental Testing of Electrical and Electronic Products Part 2.Test Methods Test A. Low Temperature GB/T 2423.2-2008 Environmental testing of electrical and electronic products - Part 2.Test method Test B. High temperature GB/T 2423.3-2016 Environmental Test Part 2.Test Method Test Cab. Constant Damp Heat Test GB/T 2423.5-2019 Environmental Testing Part 2.Test Methods Test Ea and Guidelines. Shock GB/T 2423.10-2019 Environmental Testing Part 2.Test Methods Test Fc. Vibration (Sinusoidal) GB/T 2828.1-2012 Counting Sampling Inspection Procedures Part 1.Lot-by-Lot Inspection Sampling Retrieved by Acceptance Quality Limit (AQL) plan GB/T 2900.25-2008 Electrical terminology rotating electrical machines GB/T 6113.203 Specification for Radio Disturbance and Immunity Measurement Equipment and Measurement Methods Part 2-3.Radio Disturbance and Immunity Degree Measurement Method Radiated Disturbance Measurement GB/T 6113.204 Specification for Radio Disturbance and Immunity Measurement Equipment and Measurement Methods Part 2-4.Radio Disturbance and Immunity Degree measurement method Immunity measurement GB/T 7345-2008 Basic technical requirements for control motors GB/T 7346 Basic shape and structure of control motor GB 17799.3 General Standard for Electromagnetic Compatibility Emissions in Residential, Commercial and Light Industrial Environments GB 17799.4 Electromagnetic Compatibility General Standard for Emissions in Industrial Environments JB/T 8162 Control motor packaging technical conditions

3 Terms and Definitions

The terms and definitions defined in GB/T 2900.25-2008 and the following apply to this document. 3.1 startingtime The time elapsed for the rotor to reach the rated speed after the rated voltage is applied to the motor. Note. The rated speed of the asynchronous gyro motor is generally 0.95 times the synchronous speed. 3.2 A gyro motor that uses a hydrodynamic bearing to support the rotor.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41913-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41913-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41913-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41913-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.