|
US$404.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41650-2022: Furniture - Beds - Test methods for the determination of stability, strength and durability
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41650-2022 | English | 404 |
Add to Cart
|
4 days [Need to translate]
|
Furniture - Beds - Test methods for the determination of stability, strength and durability
| Valid |
GB/T 41650-2022
|
PDF similar to GB/T 41650-2022
Basic data | Standard ID | GB/T 41650-2022 (GB/T41650-2022) | | Description (Translated English) | Furniture - Beds - Test methods for the determination of stability, strength and durability | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y80 | | Word Count Estimation | 22,226 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41650-2022: Furniture - Beds - Test methods for the determination of stability, strength and durability
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Furniture - Beds - Test methods for the determination of stability, strength and durability
ICS 97.140
CCSY80
National Standards of People's Republic of China
Furniture bed stability, strength and durability
testing method
Furniture-Beds-
(ISO 19833.2018, IDT)
Published on 2022-07-11
2023-02-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General Test Conditions 1
5 Test equipment 2
6 Test Procedures - Stability, Strength and Durability 6
7 Test procedure---Bed surface lifting mechanism 16
8 Test report 17
Appendix A (Informative) Stability, Strength and Durability Test Recommended Force Values, Cycle Times, etc. 18
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is equivalent to ISO 19833.2018 "Test methods for stability, strength and durability of furniture beds".
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China National Light Industry Federation.
This document is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480).
This document is drafted by. Shanghai Institute of Quality Supervision and Inspection Technology, Guangdong Weifu Home Furnishing Technology Co., Ltd., Guangdong Canoa
Home Furnishing Co., Ltd., Qisheng Technology Co., Ltd., Xiamen Standard & Poor's Standardization Service Co., Ltd., Heye Health Technology Co., Ltd.,
Hubei Lianle Bedding Group Co., Ltd., Foshan Aisinuo Furniture Co., Ltd., Fujian Changtai Xinzhonghao Furniture Co., Ltd., Guangdong Sea
Guangdong Testing and Certification Service Co., Ltd., Mingzhu Furniture Co., Ltd., Mousse Healthy Sleep Co., Ltd., Jiangxi Golden Tiger Insurance Equipment Set
Group Co., Ltd., Jiangxi Jingxing Intelligent Technology Co., Ltd., Jiangxi Golden Oak Industry Co., Ltd., Zhongshan Huasheng Furniture Manufacturing Co., Ltd., Diojia
Furniture Group Co., Ltd., China Furniture Association, Zhejiang Light Industrial Products Quality Inspection Research Institute, Foshan Jinfu Island Furniture Manufacturing Co., Ltd.
The main drafters of this document. Wang Jin, Liu Chenguang, Luo Jufen, Cheng Guobiao, Yao Chenlan, Tu Qi, Zhong Wenhan, Shen Guofeng, Li Fangfei, Zou Jia,
Li Jianxia, Zhang Weiming, Chen Yonggang, Zhu Yunxiao, Gu Xiaobing, Chen Zhiyong, Fang Zhicai, Fang Yanwen, Zhou Yi, He Xiangcheng, Chen Yihao, Wang Weichao,
Wang Jianbing, Wang Liping, Xiong Yanlin, Zhang Jinlin, Xiong Weiru, Yao Yonghong, Sun Jun, Chen Guoping.
Furniture bed stability, strength and durability
testing method
1 Scope
This document describes methods for testing the stability, strength and durability of fully assembled beds, including bed frames and bed tops.
This document applies to all types of adult beds, not water beds, air beds, foldable beds, bunk beds, special needs beds or nursing care
and medical beds.
This document does not include methods for evaluating product aging, degradation, fire protection and electrical functions.
The strength and durability of storage components, seating surfaces and other features associated with the bed are tested against other criteria.
Additional tests apply if the bed has additional features such as storage, electrical adjustment or adjustment from a sofa into a bed.
This document does not specify loads, cycles and force values, which are specified by the requirements document. If no documents are required, please refer to Appendix A
Recommended load and number of cycles, etc.
The test methods of this document do not evaluate the durability of soft packages, such as filling materials and cladding.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
Note. GB/T 10807-2006 Determination of hardness of flexible foamed polymeric materials (indentation method) (ISO 2439.1997, IDT)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
frameless slatted bed surface unframedslatbase
A bed surface made of separate slats held together by textile, rubber or plastic straps.
Note. When the load acts on a slat, the force is transmitted to the support only through this one slat.
3.2
bed cover framedbase with frame
A bed surface consisting of slats or springs connected to a fully constructed frame system.
NOTE. When a load acts on a component, such as a slat or a spring, the force is transmitted through the frame to the support.
4 General test conditions
4.1 Preliminary preparation
The test is for a fully assembled and ready-to-use bed. The bed should be assembled according to the installation instructions provided by the manufacturer. If the bed can be pressed
According to different ways to assemble or combine, each test should be carried out according to the most unfavorable combination. If no assembly instructions are provided,
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41650-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41650-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41650-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41650-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|