HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 41508-2022 English PDF

US$289.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41508-2022: Additive manufacturing - General principles - Requirements for purchased AM parts
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 41508-2022English289 Add to Cart 3 days [Need to translate] Additive manufacturing - General principles - Requirements for purchased AM parts Valid GB/T 41508-2022

PDF similar to GB/T 41508-2022


Standard similar to GB/T 41508-2022

GB/T 41350   GB/T 41856.1   GB/T 41655   GB/T 19799.3   GB/T 41507   

Basic data

Standard ID GB/T 41508-2022 (GB/T41508-2022)
Description (Translated English) Additive manufacturing - General principles - Requirements for purchased AM parts
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J04
Word Count Estimation 14,111
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 41508-2022: Additive manufacturing - General principles - Requirements for purchased AM parts


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Additive manufacturing - General principles - Requirements for purchased AM parts ICS 25.030 CCSJ04 National Standards of People's Republic of China Additive Manufacturing General Rules Additive Manufacturing Parts Purchasing Requirements (ISO /ASTM52901.2017,MOD) Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Requirements 2 4.1 Overview 2 4.2 Parts Order Information 2 4.3 Notes on Manufactured Parts 2 4.4 Part performance and function 4 4.5 Acceptance 5 Appendix A (Informative) Typical Example of Purchase List7 A.1 Parts Ordering Information7 A.2 Notes on Manufactured Parts 7 A.3 Part performance and function 8 A.4 Acceptance 8 Reference 9

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is revised and adopted ISO /ASTM52901.2017 "Additive Manufacturing General Principles of Additive Manufacturing Parts Purchasing Requirements". The technical differences between this document and ISO /ASTM52901.2017 and their reasons are as follows. ---Add the relevant content of terms and definitions, replace ISO /ASTM52900 with GB/T 35351 (see Chapter 3), to continue to use The customary way of defining terms in the field of additive manufacturing in China is convenient for standard users to use Chinese terms; --- Added testing items and testing methods for parts performance, replacing ISO 17296-3 and ASTMF3122 with GB/T 35022 (see 4.3.1, 4.4.2), in order to fully consider the status quo of my country's additive manufacturing technology and meet the current development of my country's additive manufacturing technology Require. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Standardization Technical Committee for Additive Manufacturing (SAC/TC562). This document is drafted by. Anhui Chungu 3D Printing Intelligent Equipment Industry Technology Research Institute Co., Ltd., China Machinery Research Institute Standard Technology Research Institute (Beijing) Co., Ltd., Zhejiang Flashforge 3D Technology Co., Ltd., Shenzhen Haoqing Technology Co., Ltd., Xinjinghe Laser Technology Development (Beijing) Co., Ltd., General Research Institute of Mechanical Sciences Haixi (Fujian) Branch Co., Ltd., Beijing Machinery Science and Technology Guochuang Lightweight Science Research Institute Co., Ltd., South Beijing University of Aeronautics and Astronautics, Shandong Chuangrui Additive Manufacturing Industry Technology Research Institute Co., Ltd., Anhui Sanlu Industrial Co., Ltd., Anhui Zhongke Spring Valley Laser Industry Technology Research Institute Co., Ltd. The main drafters of this document. Zong Ze, Xiao Chengxiang, Sun Wenming, Xue Lian, Ou Yuhui, Xu Xuan, Li Haibin, Guan Kai, Jiang Chao, Wang Miaohui, Liu Wenzhi, Gu Dongdong, Lu Zhongli, Jiang Kun, Gao Xuesong.

Introduction

This document specifies the definition and communication of additive manufacturing requirements for purchased parts. The aim is to bring additive manufacturing between customers and parts suppliers Ability to communicate effectively and clearly to ensure parts meet customer requirements. This document is intended for use by additive manufacturing part suppliers and/or or customer use. This document is the top-level standard in the additive manufacturing standard system, as it applies to any additive manufacturing process and any material type zero pieces. This document allows for different requirements depending on the criticality of the additively manufactured part and the classification of the intended end use. Additive Manufacturing General Rules Additive Manufacturing Parts Purchasing Requirements

1 Scope

This document specifies the procurement requirements for additively manufactured parts. This document establishes guidelines for customers and parts suppliers in the parts procurement process, including customer order information, part definition numbers data, raw material requirements, part performance and function, inspection requirements and part acceptance methods. This document applies to parts manufactured using additive manufacturing techniques that meet the minimum acceptance requirements. When ordering, add a one or more supplementary requirements to meet more stringent customer requirements.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 35022 Additive Manufacturing Main Characteristics and Test Methods Parts and Powder Raw Materials GB/T 35351 Additive Manufacturing Terminology GB/T 41507 Additive Manufacturing Terminology Coordinate System and Test Methods (GB/T 41507-2022, ISO /ASTM52921. 2013, MOD)

3 Terms and Definitions

GB/T 35351 as well as the following terms and definitions apply to this document. 3.1 Factory inspection pre-shipmentinspection Before delivery, inspect the supplied parts or test specimens according to the part's specification to confirm compliance with the parts order requirements. 3.2 qualificationpart Parts manufactured before the official production of product parts can be put into official production after the qualification is qualified. NOTE. Is used to define specific aspects of the manufacturing process or part characteristics. 3.3 first productionpart Parts with the same geometry (and the same tolerances), the same materials, and the same features as the product requested for the order are used for inspection Verify that the production process has the corresponding manufacturing capacity. 3.4 reference part A part that is similar to the final part, but has a different geometry, size, or feature that is easily measured or characterized. NOTE. Reference parts are usually anatomical parts with simple geometry to verify part properties and reduce measurement effort. 3.5 Acceptance acceptance An agreement between a customer and a parts supplier for the delivery of parts that meet the requirements of a purchase order.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41508-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41508-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41508-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41508-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.