|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41398-2022: Microscopes一Minimum requirements for binocular tubes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41398-2022 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Microscopes一Minimum requirements for binocular tubes
| Valid |
GB/T 41398-2022
|
PDF similar to GB/T 41398-2022
Basic data | Standard ID | GB/T 41398-2022 (GB/T41398-2022) | | Description (Translated English) | MicroscopesһMinimum requirements for binocular tubes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N32 | | Word Count Estimation | 6,660 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41398-2022: Microscopes一Minimum requirements for binocular tubes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Microscopes—Minimum requirements for binocular tubes
ICS 37.020
CCSN32
National Standards of People's Republic of China
Microscope Binocular Tube Minimum Requirements
(ISO 19055.2015, MOD)
Published on 2022-04-15
2022-11-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Requirement 1
Appendix A (normative) Test method for binocular tube 3
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is modified to adopt ISO 19055.2015 "Minimum Requirements for Microscope Binocular Tubes".
Compared with ISO 19055.2015, this document has the following structural adjustments.
--- Added 3.4, and the subsequent item numbers will be extended in turn;
--- Chapter 4 has added article numbers, 4.1~4.6 correspond to the paragraphs in Chapter 4 of ISO 19055.2015 in turn;
--- Added A.6, and subsequent item numbers will be extended in turn.
The technical differences between this document and ISO 19055.2015 and their reasons are as follows.
--- Replace ISO 15227.2000 with the normatively cited GB/T 19863-2005, and the degree of consistency between the two documents is
Modified to adapt to our country's technical conditions and improve operability;
--- Added the term and definition of "divergence" (see 3.4) to facilitate a correct understanding of the meaning of divergence in Table 1;
---In the characteristic "direction difference of the optical axis of the left and right optical systems" in Table 1, change the convergence requirement of the general-purpose lens barrel "≤45'" to
"≤60'", the divergence requirement "≤10'" was changed to "≤30'", and the divergence requirement "≤3'" of the high-performance lens barrel was changed to "≤10'", so as to
In line with the production level of Chinese enterprises and improve the economy;
--- Change the test method "ISO 15227.20006.3.13" in Table 2 to "A.6";
--- Increased the test method for the minimum range of diopter adjustment (see A.6).
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Optical and Photonics Standardization Technical Committee (SAC/TC103).
This document is drafted by. Ningbo Teaching Instruments Co., Ltd., Shanghai Visionary Optoelectronics Technology Co., Ltd., Nanjing Donglilai Optoelectronics Industry
Co., Ltd., Shanghai Qianxin Instrument Co., Ltd., Shanghai University of Science and Technology, Jiangxi Phoenix Optical Technology Co., Ltd., Guangzhou Mingmei Optoelectronics Technology
Technology Co., Ltd., Microaudie Industrial Group Co., Ltd., Ningbo Zhanjing Optical Instrument Co., Ltd., Ningbo Yongxin Optical Co., Ltd., Wu
Zhou Oka Optical Instrument Co., Ltd., Ningbo Sunny Instrument Co., Ltd., Ningbo Huaguang Precision Instrument Co., Ltd., Nanjing Jiangnan Yongxin Optical Co., Ltd.
Co., Ltd., Shanghai Institute of Optical Instruments.
The main drafters of this document. Wang Guorui, Wang Weisheng, Hong Yiping, Hua Yue, Zhang Wei, Cao Xiaohong, Zhang Chunwang, Yang Zesheng, Bao Jinquan, Cui Zhiying,
Zhang Tao, Hu Senhu, Kong Yanbo, Li Xi, Feng Yisheng.
Microscope Binocular Tube Minimum Requirements
1 Scope
This document specifies the requirements for compound microscope binocular tubes.
This document applies to the design, manufacture and quality assessment of compound microscope binocular tubes.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 19863-2005 Stereo microscope test method (ISO 15227.2000, MOD)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
The distance between the exit pupils of the left and right optical systems.
3.2
optical axis
The axis determined by the central ray emitted from the central object point of the object plane and exiting through the eyepiece.
3.3
convergence convergence
The phenomenon in which the intersection of the optical axes of the left and right optical systems is farther from the eye than the eyepiece.
3.4
divergence
The phenomenon in which the intersection of the optical axes of the left and right optical systems is closer to the eye than the eyepiece.
3.5
like curl imagingrotation
The image rotation orientation with the optical axis as the rotation axis.
3.6
relative brightness
The ratio of the brightness of the darker to the brighter of two optical systems.
Note 1.The relative brightness requirements specified in Table 3 apply to any polarization state.
Note 2.Expressed in percentage (%).
4 Requirements
4.1 Tables 1, 2 and 3 specify the minimum requirements for the optomechanical and radiometric characteristics of the binocular tube.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41398-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41398-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41398-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41398-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|