|
US$394.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41378-2022: Plastics - Blow-moulded polypropylene containers for packaging of liquid food stuffs
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41378-2022 | English | 394 |
Add to Cart
|
4 days [Need to translate]
|
Plastics - Blow-moulded polypropylene containers for packaging of liquid food stuffs
| Valid |
GB/T 41378-2022
|
PDF similar to GB/T 41378-2022
Basic data | Standard ID | GB/T 41378-2022 (GB/T41378-2022) | | Description (Translated English) | Plastics - Blow-moulded polypropylene containers for packaging of liquid food stuffs | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y28 | | Word Count Estimation | 20,240 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41378-2022: Plastics - Blow-moulded polypropylene containers for packaging of liquid food stuffs
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics - Blow-moulded polypropylene containers for packaging of liquid food stuffs
ICS 55.140
CCSY28
National Standards of People's Republic of China
Blow Molded Polypropylene Containers for Plastic Liquid Food Packaging
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is equivalent to ISO 13106.2014 "Blow Molded Polypropylene Containers for Plastic Liquid Food Packaging".
The Chinese documents that have a consistent correspondence with the international documents normatively cited in this document are as follows.
---GB/T 2035-2008 Plastics terms and their definitions (ISO 472.1999, IDT);
---GB/T 2828.1-2012 Counting Sampling Inspection Procedure Part 1.Lot-by-Lot Inspection Retrieved by Acceptance Quality Limit (AQL)
Sampling plan (ISO 2859-1.1999, IDT);
---GB/T 2918-2018 Standard Environment for Conditioning and Testing of Plastic Specimens (ISO 291.2008, MOD);
---GB/T 2546.1-2006 Plastic polypropylene (PP) molding and extrusion materials - Part 1.Nomenclature system and classification basis
(ISO 1873-1.1995,MOD);
---GB/T 2546.2-2003 Plastic polypropylene (PP) molding and extrusion materials - Part 2.Sample preparation and performance determination
(ISO 1873-2.1997,MOD);
---GB/T 30102-2013 Guidelines for the recovery and recycling of plastic plastic waste (ISO 15270.2008, IDT).
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China National Light Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Materials and Products in Direct Contact with Food (SAC/TC397).
This document is drafted by. Light Industry Plastics Processing and Application Research Institute, Beijing Technology and Business University, Shenzhen Wandajie Environmental Protection New Material Co., Ltd.
Company, Beijing Yonghua Qingtian Design and Packaging Co., Ltd., Inner Mongolia Yili Industrial Group Co., Ltd., Inner Mongolia Kaili Huawei Technology Co., Ltd.
Co., Ltd., National Plastic Products Quality Supervision and Inspection Center (Beijing), Guangdong Chongxi Environmental Protection Technology Co., Ltd.
The main drafters of this document. Zhou Yingxin, Sun Hui, Wei Da, Wei Jie, Liu Yunqiao, Deng Yuming, Zhang Shuyan.
Blow Molded Polypropylene Containers for Plastic Liquid Food Packaging
1 Scope
This document specifies the requirements for blow-molded polypropylene round-bottom containers with a capacity of not more than 2L (including 2L) for liquid food packaging. Book
The document also specifies quality tolerances, dimensional tolerances, sampling methods, test requirements and performance requirements for blow-molded polypropylene containers for liquid food packaging.
NOTE. It is not intended that polypropylene is the only polymer suitable for this application, as include high density polyethylene (PE-HD), polyethylene terephthalate (PET)
Other polymers, etc., are also suitable.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
ISO 472 Plastics Terms and Definitions (Plastics- Vocabulary)
ISO 1873-1 Plastics Polypropylene (PP) molding and extrusion materials - Part 1.Nomenclature system and classification basis 1) (Plastics-
specifications)
ISO 1873-2 Plastics Polypropylene (PP) molding and extrusion materials - Part 2.Specimen preparation and determination of properties 2) (Plastics-
ISO 2859-1 Count sampling inspection procedures - Part 1.Lot-by-lot inspection sampling plans retrieved by acceptance quality limit (AQL)
1) ISO 1873-1 was obsolete in.2015 and was replaced by ISO 19069-1 in the same year.
2) ISO 1873-2 was obsolete in.2016 and was replaced by ISO 19069-2 in the same year.
3 Terms and Definitions
The following terms and definitions apply to this document.
NOTE. For terms and definitions in this document, please refer to ISO 472.Containers produced using ISBM technology have a neck height (H) from the highest point of the container neck to
The vertical distance of the bottom surface of the support ledge. The full capacity can also be determined by the method specified in Appendix B by using a specific volume test equipment. For bottles and loose
For mouth containers, the nominal capacity is about 90% of the full capacity.
3.1
extrusion blow-moulded container
A container formed by blowing the extruded parison of thermally softened thermoplastic against the inner wall of the mold by applying air pressure.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41378-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41378-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41378-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41378-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|