|
US$379.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41333-2022: Technical requirements of complete equipment for lime calcination
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41333-2022 | English | 379 |
Add to Cart
|
4 days [Need to translate]
|
Technical requirements of complete equipment for lime calcination
| Valid |
GB/T 41333-2022
|
Standard similar to GB/T 41333-2022 GB/T 35150.4 GB/T 35150.3 Basic data | Standard ID | GB/T 41333-2022 (GB/T41333-2022) | | Description (Translated English) | Technical requirements of complete equipment for lime calcination | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q92 | | Word Count Estimation | 19,147 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41333-2022: Technical requirements of complete equipment for lime calcination---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements of complete equipment for lime calcination
ICS 91.110
CCSQ92
National Standards of People's Republic of China
Technical requirements for complete sets of equipment for lime calcination
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 3
4 Equipment composition and basic parameters 4
4.1 Composition 4
4.2 Basic parameters 5
5 requirements 7
5.1 General requirements7
5.2 Performance Requirements 7
5.3 Calcination equipment 8
5.4 Auxiliary Equipment 9
5.5 Electrical control and intelligence 10
6 Safety and environmental protection 11
6.1 Safety 11
6.2 Environmental protection 12
7 Installation acceptance and commissioning 12
7.1 Installation acceptance 12
7.2 Debugging 12
8 Performance test 13
8.1 Test content 13
8.2 Test methods 13
9 Delivery documents15
Figure 1 Lime calcining plant using powder or gas fuel composition 4
Figure 2 Composition of Lime Calcination Plant Using Bulk Fuel 5
Table 1 Basic parameters of rotary kiln equipment5
Table 2 Basic parameters of double-chamber shaft kiln equipment 5
Table 3 Basic parameters of single-chamber shaft kiln equipment6
Table 4 Basic parameters of annular sleeve kiln equipment 6
Table 5 Basic parameters of beam kiln equipment7
Table 6 Contents of performance test 13
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Building Materials Federation.
This document is under the jurisdiction of the National Standardization Technical Committee for Building Materials and Equipment (SAC/TC465).
This document is drafted by. Jiangsu Pengfei Group Co., Ltd., Beijing Jiayong Huitong Energy Technology Co., Ltd., Sinoma International Engineering Co., Ltd.
Engineering Co., Ltd., Tianjin Cement Industry Design and Research Institute Co., Ltd., Jiangsu Building Materials Research and Design Institute Co., Ltd., CITIC Heavy Industry
Engineering Technology Co., Ltd., Yancheng Institute of Technology, Shandong Chenyue Heavy Machinery Co., Ltd., Tangshan Jidong Equipment Engineering Co., Ltd., Guangzhou
Xiliu Steel New Material Technology Co., Ltd., Jiangsu Zhongshengyuan Technology Co., Ltd., Shijiazhuang Endeavour Technology Co., Ltd., Nanjing Triumph International
Engineering Co., Ltd., Xi'an West Mine Environmental Protection Technology Co., Ltd., Jiangsu Yongsai Machinery Technology Co., Ltd., Nanjing Henghui Powder Technology Engineering Co., Ltd.
Company, Zhuhai Special Economic Zone Shunyi Development Co., Ltd., China Building Materials Machinery Industry Association.
The main drafters of this document. Ben Daochun, Li Xiaoping, Shi Pengyu, Liu Chang, Yin Zhisong, He Xiaolong, Zhao Guoyu, Tang Shengliang, Wang Yumin,
Song Zhongyuan, Wu Zhifang, Zhang Ping, Li Haibao, Dai Weilin, Liu Pingcheng, Yang Xiaohong, Sun Qianfeng, Jiao Liujun, Huang Sheng, Zhang Junfeng, Zhang Linjin, Liu Dongliang,
Cui Hengbo, Jiang Baoqing, Zhu Yihua, Sun Zhizhi, Zhang Jianxin, Xu Youjuan.
Technical requirements for complete sets of equipment for lime calcination
1 Scope
This document specifies the equipment composition and basic parameters, requirements, safety and environmental protection, installation acceptance and commissioning, performance of complete sets of lime calcining equipment
Test, deliver files.
This document applies to complete sets of lime rotary kiln calcination equipment (hereinafter referred to as "rotary kiln equipment") and lime shaft kiln calcination complete sets of equipment (hereinafter referred to as "rotary kiln equipment").
referred to as "shaft kiln equipment"). The shaft kiln equipment includes but is not limited to double-chamber shaft kiln equipment, single-chamber shaft kiln equipment, annular sleeve kiln equipment and beam type
Kiln equipment.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 700-2006 Carbon structural steel
GB/T 1955 Construction winch
GB/T 2589-2020 General rules for the calculation of comprehensive energy consumption
GB 2894 Safety Signs and Guidelines for their Use
GB/T 3286.8 Methods for chemical analysis of limestone and dolomite - Part 8.Determination of weight loss on ignition by gravimetric method
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB/T 3797 Electrical Control Equipment
GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms
GB 4915-2013 Cement Industry Air Pollutant Emission Standard
GB 5083 General Rules for Safety and Hygiene Design of Production Equipment
GB/T 5226.1 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 1.General Specifications
GB/T 7251 (all parts) Low-voltage switchgear and control equipment
GB/T 7551 Load Cell
GB/T 7721-2017 Continuous Accumulation Automatic Weighing Apparatus (Belt Scale)
GB/T 7932 General rules and safety of pneumatic control systems and their components
GB/T 7935 General Specifications for Hydraulic Components
GB/T 8196 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards
GB/T 9969 General Principles of Instruction Manual for Industrial Products
GB/T 10595 Belt Conveyor
GB 12348-2008 Environmental Noise Emission Standard for Industrial Enterprises
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 14048 (all parts) Low-voltage switchgear and controlgear
GB/T 14976-2012 Stainless steel seamless steel pipe for fluid transportation
GB/T 15432 Determination of total suspended particulate matter in ambient air by gravimetric method
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41333-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41333-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41333-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41333-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|