|
US$349.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41148-2021: General requirements for gas fuel generating sets
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41148-2021 | English | 349 |
Add to Cart
|
4 days [Need to translate]
|
General requirements for gas fuel generating sets
| Valid |
GB/T 41148-2021
|
PDF similar to GB/T 41148-2021
Basic data | Standard ID | GB/T 41148-2021 (GB/T41148-2021) | | Description (Translated English) | General requirements for gas fuel generating sets | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K59 | | Word Count Estimation | 18,126 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41148-2021: General requirements for gas fuel generating sets---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements for gas fuel generating sets
ICS 29:160:40
CCSK59
National Standards of People's Republic of China
General technical conditions for gas fuel generating sets
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Technical requirements 1
4:1 General 1
4:2 Unit matching 2
4:3 Environmental conditions 2
4:4 Installation 3
4:5 Rated type and operation mode of output power 3
4:6 Startup Requirements 3
4:7 Air source requirements 3
4:8 Index limits 4
4:9 Temperature rise 6
4:10 Protection device 6
4:11 Requirements for the heat consumption rate (or air consumption) of the unit 6
4:12 Structure 7
4:13 Limits for environmental pollution7
4:14 Tightness 9
4:15 Security 9
4:16 Reliability and maintainability 11
4:17 Completeness 11
4:18 Unit marking 11
5 Inspection items, inspection rules and inspection methods 12
5:1 General 12
5:2 Inspection classification 12
5:3 Inspection sequence 12
5:4 Inspection conditions 12
5:5 Identification test 12
5:6 Type inspection 13
5:7 Factory inspection 13
5:8 Acceptance inspection 15
5:9 Inspection methods 15
6 Packaging and storage 15
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Electrical Equipment Industry Association:
This document is under the jurisdiction of the National Standardization Technical Committee for Reciprocating Internal Combustion Gas Power Generation Equipment (SAC/TC372):
This document is drafted by: Lanzhou Power Vehicle Research Institute Co:, Ltd:, China National Petroleum Corporation Jichai Power Co:, Ltd:, Shenzhen Dongkang Electric Power Co:, Ltd:
Power Equipment Co:, Ltd:, Jiangxi Tsinghua Tellhow Sanbo Motor Co:, Ltd:, Changzhou Changfa Agricultural Equipment Engineering Technology Research Co:, Ltd:, Shenzhen
Worbenda New Energy Co:, Ltd:, Shanghai Dingxin Electric (Group) Co:, Ltd:, Air Force Early Warning Academy Radar Non-commissioned Officer School, Shandong Saiwa
Special Power Equipment Co:, Ltd:, Shanghai Cooltech Power Co:, Ltd:, Fujian Yongqiangjia Power Equipment Co:, Ltd:, Zhengzhou Foguang Power Generation Equipment Co:, Ltd:
Equipment Co:, Ltd:
The main drafters of this document: Li Xueming, Guo Jinju, Chen Hongbin, Deng Yanping, Zheng Herui, Lu Gang, Wang Yong, Zhang Yourong, Zhong Shenghua, Xu Naiqiang,
Zhuo Ruixing, Guo Haiqin, Xue Chen:
General technical conditions for gas fuel generating sets
1 Scope
This document specifies the technical requirements, inspection items, inspection rules and inspection methods for gas fuel generating units (hereinafter referred to as "units"):
Packaging and storage requirements:
This document is applicable to machines with rated voltage of 15kV and below, rated frequency of 50Hz, and fueled by natural gas, biogas, gas and other gases:
Group: Units using other gas fuels, voltage levels and frequencies can refer to this document:
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
GB/T 311:1-2012 Insulation coordination - Part 1: Definitions, principles and rules
GB/T 311:2-2013 Insulation Coordination Part 2: Guidelines for Use
GB/T 2820:1-2009 Reciprocating internal combustion engine-driven alternator sets - Part 1: Use, rating and performance
GB/T 2820:2 Reciprocating Internal Combustion Engine Driven Alternator Sets Part 2: Engines
GB/T 2820:3 Reciprocating Internal Combustion Engine Driven Alternator Sets Part 3: Alternators for Generator Sets
GB/T 2820:4-2009 Reciprocating internal combustion engine-driven alternator sets - Part 4: Control devices and switching devices
GB/T 2820:5-2009 AC generator sets driven by reciprocating internal combustion engines - Part 5: Generator sets
GB/T 2820:6-2009 Reciprocating internal combustion engine-driven alternator sets - Part 6: Test methods
GB/T 2820:9-2002 Reciprocating internal combustion engine-driven alternator sets - Part 9: Measurement and evaluation of mechanical vibration
GB/T 2820:10 Reciprocating internal combustion engine-driven alternator sets - Part 10: Measurement of noise (cladding method)
GB/T 6072:1-2008 Performance of reciprocating internal combustion engines - Part 1: Calibration and testing of power, fuel consumption and oil consumption
Additional requirements for method general purpose engines
GB/T 13306 Signs
GB/T 20136-2006 General test method for internal combustion engine power station
GB/T 37089 Reciprocating internal combustion engine driven alternator set controller
JB/T 8194 terminology of internal combustion engine power station
JB/T 9583:2 Gas fuel generator set-Part 2: Rated power, voltage and speed
3 Terms and Definitions
GB/T 2820:1-2009, GB/T 2820:2, GB/T 2820:3, GB/T 2820:4-2009, GB/T 2820:5-2009,
GB/T 2820:6-2009, GB/T 2820:9-2002, GB/T 6072:1-2008, GB/T 20136-2006 and JB/T 8194
The defined terms and definitions apply to this document:
4 Technical requirements
4:1 General
4:1:1 The unit shall comply with the provisions of this document: The supporting parts of the unit, which are not specified in this document, shall meet the requirements of their respective technical conditions:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41148-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 41148-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41148-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41148-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|