|
US$384.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40926.5-2021: Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for ice hockey players
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40926.5-2021 | English | 384 |
Add to Cart
|
3 days [Need to translate]
|
Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for ice hockey players
| Valid |
GB/T 40926.5-2021
|
PDF similar to GB/T 40926.5-2021
Basic data | Standard ID | GB/T 40926.5-2021 (GB/T40926.5-2021) | | Description (Translated English) | Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for ice hockey players | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y55 | | Word Count Estimation | 22,214 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40926.5-2021: Protective equipment for use in ice hockey - Part 5: Neck laceration protectors for ice hockey players
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Protective equipment for use in ice hockey - Part 5.Neck laceration protectors for ice hockey players
ICS 13.340.20;97.220.20
CCSY55
National Standards of People's Republic of China
Ice hockey protective gear
Part 5.Neck protector
(ISO 10256-5.2017, IDT)
Released on 2021-11-26
2021-11-26 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General requirements 2
4.1 Harmlessness/material 2
4.2 Ergonomics 2
4.3 Protection area and coverage area 2
4.4 Anti-cutting 2
4.5 Permanent Mark 2
5 Test method 3
5.1 Test device deviation 3
5.2 Test samples and pre-test treatment 3
5.3 Test Step 3
6 Test report 4
7 Marking and labeling 5
7.1 Identification 5
7.2 Label 5
8 Product information 5
Appendix A (Normative) Cutting test using a horizontal single rail device 7
Appendix B (Normative) Cutting test using guided drop device 10
Appendix C (Normative) Structural Model 14
Reference 17
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is part 5 of GB/T 40926 "Ice Hockey Protective Gear". GB/T 40926 has released the following parts.
---Part 1.General requirements;
---Part 2.Head Protector;
---Part 3.Facial protective gear;
---Part 4.Goalkeeper's head and face protection;
---Part 5.Neck protector.
This document is equivalent to ISO 10256-5.2017 "Ice Hockey Protective Gear Part 5.Neck Protective Gear".
The following editorial changes have been made to this document.
--- Added the description of R7.5 and R1.50 in Figure B.3;
---Correct "Table A.1" in B.2.2 to "Table B.1".
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents.
This document was proposed and managed by the China National Light Industry Council.
This document was drafted by. Qiqihar Heilong International Ice and Snow Equipment Co., Ltd., China Testing and Certification Group Co., Ltd., Chinese
Educational Sports Goods Association, Zhaoqing Bohan Sports Goods Co., Ltd., Ningbo Tianqi Technology Co., Ltd., Taishan Sports Industry Group Co., Ltd.
The main drafters of this document. Huang Wei, Dai Xu, Hao Peng, Zhang Ming, Wang Hanliang, Bian Cuixiang, Wang Jinxin.
Introduction
The establishment of the ice hockey protective gear standard is to establish a set of best evaluation criteria for
References are provided in the selection of production materials, product design, and precautions required for product production and sales. The purpose of GB/T 40926 is to establish
The materials, design, test methods and other aspects of ice hockey protective gear are to be composed of six parts.
---Part 1.General requirements. The purpose is to establish the general rules applicable to the production and testing of various types of ice hockey protective gear.
Principles and related rules.
---Part 2.Head protection. The purpose is to establish that it is suitable for the production and testing of head guards in all kinds of ice hockey sports protective gear.
The general principles and related rules to be observed.
---Part 3.Facial protective gear. The purpose is to establish that it is suitable for the production and testing of facial protective gear in all kinds of ice hockey sports protective gear.
The general principles and related rules to be observed.
---Part 4.Goalkeeper's head and face protection. The purpose is to establish a goalie head suitable for all types of ice hockey protective gear
The general principles and related rules that need to be followed in the production and testing of department and face protection products.
---Part 5.Neck protector. The purpose is to establish that it is suitable for the production and testing of neck protective gear in all kinds of ice hockey sports protective gear.
The general principles and related rules to be observed.
---Part 6.Calf protector. The purpose is to establish the requirements for the production and testing of middle and calf protective gear suitable for all kinds of ice hockey sports protective gear.
The general principles and related rules to be observed.
GB/T 40926 clarifies the type classification of ice hockey protective gear through six parts, and clarifies the relevant elements and rules. By establishing
The clear scope, terminology, requirements, test methods, etc. of various types of ice hockey protective gear, so that producers, users and test-related personnel can better
Operate clearly and accurately to design and manufacture high-quality ice hockey protective gear to better promote trade, communication and technical cooperation.
The purpose of this document is to establish a set of best evaluation criteria for the neck protectors in ice hockey protective gear, and to provide a good basis for ice hockey protective gear.
References are provided in the selection of production materials, product design, and precautions required for product production and sales.
Ice hockey protective gear
Part 5.Neck protector
1 Scope
This document specifies the performance requirements and test methods for neck protectors in ice hockey. Neck protectors are used to reduce contact with hockey pucks,
The injury caused by the direct cut of the neck by the blade of the ice skate shoe.
The test requirements ensure that the neck protector meets the requirements of this document, but it cannot predict the performance of the neck protector under all possible conditions.
can. This document does not deal with the impact of hockey pucks, hockey sticks or other objects on the neck.
This document does not cover accessories related to neck protectors.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 40926.1-2021 Ice hockey protective gear Part 1.General requirements (ISO 10256-1.2016, IDT)
ISO 6330 Textiles-Domestic washing and drying procedure (Textiles-Domestic washing and drying procedure-
duresfortextiletesting)
Note. GB/T 8629-2017 Domestic washing and drying procedures for textile testing (ISO 6330.2012, MOD)
3 Terms and definitions
The following terms and definitions defined in GB/T 40926.1-2021 apply to this document.
3.1
Structural model anatomicalform
A solid or hollow object defined by its shape and size, used to support the neck protector (3.6) meets the test requirements of this document.
3.2
Anvil
A hard metal block with a round or square cross-section, with a prescribed shape at the upper end, is used to transmit the impact force of the sample to the force sensor.
3.3
Bib
Part of the neck protector (3.6), located above the front chest area.
3.4
Medianplane
Pass through the neck protector (3.6) from front to back and divide the neck protector into two equal vertical planes on the left and right.
3.5
Model
The category of neck protectors (3.6) is different from the basic elements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40926.5-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40926.5-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40926.5-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40926.5-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|