|
US$479.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40742.4-2021: Geometrical product specifications (GPS) - Geometrical precision verification - Part 4: Evaluation of dimension and geometrical error, discriminant pattern of minimum zone
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40742.4-2021 | English | 479 |
Add to Cart
|
5 days [Need to translate]
|
Geometrical product specifications (GPS) - Geometrical precision verification - Part 4: Evaluation of dimension and geometrical error, discriminant pattern of minimum zone
| Valid |
GB/T 40742.4-2021
|
PDF similar to GB/T 40742.4-2021
Basic data | Standard ID | GB/T 40742.4-2021 (GB/T40742.4-2021) | | Description (Translated English) | Geometrical product specifications (GPS) - Geometrical precision verification - Part 4: Evaluation of dimension and geometrical error, discriminant pattern of minimum zone | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J42 | | Word Count Estimation | 26,278 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40742.4-2021: Geometrical product specifications (GPS) - Geometrical precision verification - Part 4: Evaluation of dimension and geometrical error, discriminant pattern of minimum zone
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS) - Geometrical precision verification - Part 4.Evaluation of dimension and geometrical error, discriminant pattern of minimum zone
ICS 17.040.40
CCSJ42
National Standards of People's Republic of China
Product Geometric Technical Specification (GPS)
Detection and verification of geometric accuracy
Part 4.Evaluation of dimensions and geometric errors,
Discriminant mode of the smallest area
Released on 2021-10-11 and implemented on 2022-05-01
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Dimensional acceptance judgment mode 2
5 Judgment of process size in the process 4
6 Evaluation of geometric error and discriminant mode of minimum area 5
7 Evaluation of geometric errors in the process 8
Appendix A (informative) Dimension acceptance limit method and selection 10
Appendix B (Informative) Gauge tolerance and its type 12
Appendix C (Informative) Minimum Area Discrimination Method 15
Appendix D (Informative) Relationship with GPS Matrix Model 21
Reference 22
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is part 4 of GB/T 40742 "Geometrical Technical Specifications for Products (GPS) Geometric Accuracy Testing and Verification".
GB/T 40742 has released the following parts.
---Part 1.Basic concepts and measurement basic symbols, terminology, measurement conditions and procedures;
---Part 2.Detection and verification of shape, direction, position, runout and profile features;
---Part 3.Testing and verification of functional gauges and fixtures when applying the largest and smallest physical requirements;
---Part 4.Size and geometric error evaluation, minimum area discrimination mode;
---Part 5.Evaluation of measurement uncertainty in geometric feature detection and verification.
This document was proposed and managed by the National Standardization Technical Committee for Product Geometric Technical Specifications (SAC/TC240).
Drafting organizations of this document. Xuchang Far East Drive Shaft Co., Ltd., Zhengzhou University, Zhejiang University, China Aviation Development Xi’an Aero Engine
Co., Ltd., China Machinery Productivity Promotion Center, Shanghai Institute of Metrology and Testing Technology, China Machinery Research Institute of Standards and Technology (Beijing) Co., Ltd.
The main drafters of this document. Zheng Peng, Ma Xiling, Yang Jiangxin, Zhang Li, Fu Yunxia, Zhu Yue, Chen Yunsheng.
Introduction
In the production process, the digital measurement and control method for the geometric accuracy of the product size, shape, direction, position, etc. is imperfect, and the geometric accuracy is counted.
Key issues such as the lack of characterization inspection methods and measurement uncertainty evaluation methods, and the passive backwardness of process quality accuracy measurement and control methods.
The digital measurement theory, method and technology of product geometric accuracy, and build a geometric accuracy inspection operation specification system and control system in line with the new generation of GPS.
System strategy.
GB/T 40742 "Geometrical Technical Specifications for Products (GPS) Detection and Verification of Geometric Accuracy" is based on the new generation of GPS product geometrical specifications.
Model system, using digital online measurement technology, statistical learning and analysis theory, advanced manufacturing technology, system integration and management technology, etc., through
Theoretical analysis, model mapping and simulation/experimental verification are the recommended national standards for geometric accuracy testing and verification.
The standard is based on the proposed inspection operator specification, and analyzes the measurement equipment, measurement methods, measurement principles and measurement involved in the actual measurement process.
Influencing factors such as measurement conditions, the uncertainty composition and transmission law of the elements in the extraction, filtering, and fitting operations are given, and the uncertainty is established.
Degree evaluation model. Through the online collection of product quality parameters, data processing and system evaluation in the production process, it effectively solves the problem of
Data extraction, error separation, fitting evaluation, quality analysis and other operations and process accuracy control of digital measurement of quality accuracy in the production process
Fan unification problem.
GB/T 40742 is mainly used to standardize key element operations and standard strategies, and establish corresponding geometric accuracy inspection operation models and inspections
Operators provide technical support for the analysis and improvement of product production quality. For the convenience of readers, the standard is divided into 5 parts.
Compiled, the five parts are interrelated and independent, which together constitute the content of geometric accuracy detection and verification.
GB/T 40742 is composed of 5 parts.
---Part 1.Basic concepts and measurement basic symbols, terminology, measurement conditions and procedures. Provisions for geometric accuracy testing and verification
The basic concepts, measurement basis, terminology, symbols, measurement conditions and measurement procedures of the
---Part 2.Detection and verification of shape, direction, position, runout and profile features. Prescribes the shape, direction, position, and runout
And the general provisions of profile detection and verification, inspection operation set, measurement uncertainty evaluation and conformity assessment, etc.
---Part 3.Testing and verification of functional gauges and fixtures when applying the largest and smallest physical requirements. Stipulates that
The general requirements for the testing and verification process with the largest and smallest physical requirements and the general requirements for the design of testing fixtures.
---Part 4.Size and geometric error evaluation, the smallest area of the discriminant model. It specifies the dimensional acceptance and the evaluation operation of geometric error
do. For different target tasks (offline, online inspection), the product size conformity assessment and geometric error assessment methods are given
And related default principles and the minimum area discrimination method for shape error, direction error, and position error.
---Part 5.Evaluation of measurement uncertainty in geometric feature detection and verification. Specifies the uncertainty evaluation of measurement results
operate. Provides an evaluation method for the uncertainty of the product size and geometric tolerance detection and verification process, and gives the basis
The application specification of the Uncertainty Management Program (PUMA) for the optimization of the inspection and verification process.
Product Geometric Technical Specification (GPS)
Detection and verification of geometric accuracy
Part 4.Evaluation of dimensions and geometric errors,
Discriminant mode of the smallest area
1 Scope
This document specifies the size acceptance and geometric error assessment operations. For different target tasks (offline, online inspection), the production
Product size conformity evaluation, geometric error evaluation method and related default principles and minimum area of shape error, direction error, and position error
Discriminant.
This document is applicable to the detection and verification of geometric features such as product size, shape, direction, position, and runout.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 1957-2006 Technical conditions for smooth limit gauges
GB/T 1958 Product Geometric Technical Specification (GPS) Geometric Tolerance Testing and Verification
GB/T 3177-2009 Product Geometric Technical Specification (GPS) Inspection of smooth workpiece size
GB/T 16671 Product Geometric Technical Specification (GPS) Geometric Tolerance Maximum Entity Requirements (MMR), Minimum Entity Requirements
(LMR) and reversible requirements (RPR)
GB/T 17851 Product Geometric Technical Specification (GPS) Geometric Tolerance Datum and Datum System
GB/T 18779.1 Geometric Technical Specifications for Products (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1.Inspection According to Specifications
Qualified or unqualified rules
GB/T 24637.2 Product Geometric Technical Specification (GPS) General Concepts Part 2.Basic Principles, Specifications, Operational Sets and Uncertainties
Fixed degree
JJF1001 General measurement terms and definitions
3 Terms and definitions
GB/T 1958, GB/T 16671, GB/T 17851, GB/T 24637.2 and JJF1001 and the following terms and definitions are applicable
Used in this document.
3.1
Proceduresize
The machining dimensions that should be guaranteed for each process in the machining process are usually the dimensions between the machining surface and the positioning reference surface.
Note. In the design process, the machining allowance of each process is determined according to the nature of each process, and then the size of each process can be calculated.
3.2
Process allowance
The difference in process size between two adjacent processes.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40742.4-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40742.4-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40742.4-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40742.4-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|