US$679.00 · In stock Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 40434-2021: Rectification equipment for charging industrial batteries Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 40434-2021 | English | 679 |
Add to Cart
|
6 days [Need to translate]
|
Rectification equipment for charging industrial batteries
| Valid |
GB/T 40434-2021
|
PDF similar to GB/T 40434-2021
Basic data Standard ID | GB/T 40434-2021 (GB/T40434-2021) | Description (Translated English) | Rectification equipment for charging industrial batteries | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | K46 | Word Count Estimation | 34,357 | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 40434-2021: Rectification equipment for charging industrial batteries---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rectification equipment for charging industrial batteries
ICS 29.200
K46
National Standards of People's Republic of China
Industrial battery charging rectifier equipment
Released on 2021-08-20
2022-03-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Product model and basic parameters 4
4.1 Product model 4
4.2 Basic parameters 4
5 Technical requirements 5
5.1 General 5
5.2 Normal use conditions 5
5.3 Abnormal use conditions 7
5.4 Performance 8
6 Test method 20
6.1 General inspection 20
6.2 Insulation test 20
6.3 Manual charging test 20
6.4 Constant voltage charging voltage adjustment test 20
6.5 Constant current charging current adjustment test 20
6.6 Constant power charging test 20
6.7 Quick charge test 21
6.8 Discharge test to the public grid 21
6.9 Calibration accuracy test 21
6.10 Constant voltage accuracy test 21
6.11 Current limiting characteristic test 21
6.12 Constant current accuracy test 21
6.13 Limiting pressure characteristic test 22
6.14 Temperature compensation characteristic test 22
6.15 Operation performance check 22
6.16 Efficiency measurement 22
6.17 Temperature rise test 22
6.18 Electromagnetic compatibility---Immunity test 23
6.19 Electromagnetic compatibility---emission test 23
6.20 Protection test 24
6.21 Noise measurement 24
6.22 Safety requirements 24
6.23 Ripple voltage and ripple current measurement 24
6.24 Remote control function check 25
6.25 Impact test 25
6.26 Free drop test 25
6.27 Transport test 25
6.28 Tests for special requirements 25
7 Inspection rules 25
7.1 General rules 25
7.2 Factory test 26
7.3 Type test 26
7.4 Test item 26
8 Marking, packaging, transportation and storage 27
8.1 Sign 27
8.2 Packaging 28
8.3 Transportation 28
8.4 Storage 28
References 29
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Electrical Equipment Industry Association.
This standard is under the jurisdiction of the National Power Electronic System and Equipment Standardization Technical Committee (SAC/TC60).
Drafting organizations of this standard. Zhuhai Titan Technology Co., Ltd., Guangdong Zhicheng Champion Group Co., Ltd., Xi'an Power Electronics Technology Research Institute
Research institute.
The main drafters of this standard. Pan Jingyi, Wei Hongqi, Li Minying.
Industrial battery charging rectifier equipment
1 Scope
This standard specifies the terms and definitions, product models and basic parameters of industrial battery charging rectifier equipment (hereinafter referred to as charging rectifier equipment).
Data, technical requirements, testing, marking, packaging, transportation and storage.
This standard applies to the DC output voltage used in industrial sites not exceeding 1000V, and the DC power of a single power unit is not less than
10kW, a charging rectifier device composed of single or multiple power units, also suitable for charging rectifiers installed in other devices as accessories
equipment. Electric power engineering, post and telecommunications battery charging, floating charge rectifier equipment can also be used as reference.
Note. The charging and rectifying equipment is used to charge or discharge rechargeable batteries, and provide battery charging or discharging for battery formation and similar equipment.
Cable connection or permanent connection.
This standard does not apply to battery chargers for fire alarm signal fire protection systems, household battery chargers, battery chargers for automobile starting,
The battery charger that drives the centrifugal ignition pump internal combustion engine and the equipment that uses the battery charger as other system applications. In this standard
Fast charging is also not suitable for charging lead-acid lean-liquid batteries.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 2423.5-2019 Environmental Test Part 2.Test Method Test Ea and Guideline. Impact
GB/T 2423.7 Environmental test Part 2.Test method Test Ec. Impact caused by rough operation (mainly used for equipment type
sample)
GB/T 3859.1-2013 General requirements for semiconductor converters and power grid commutated converters Part 1-1.Basic requirements specification
GB/T 4208-2017 Enclosure protection grade (IP code)
GB/T 4365 Electrotechnical terminology electromagnetic compatibility
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1.General requirements
GB 4824 Industrial, scientific and medical equipment radio frequency disturbance characteristic limits and measurement methods
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 13422-2013 Electrical test methods for semiconductor converters
GB/T 14549 Power quality public grid harmonics
GB 17625.1-2012 electromagnetic compatibility limit harmonic current emission limit (equipment input current per phase ≤ 16A)
GB/T 17625.8-2015 Electromagnetic compatibility limit The input current per phase is greater than 16A and less than or equal to 75A connected to the public low
Harmonic current limit generated by the equipment of the pressure system
GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test
GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test
GB/T 17626.5-2019 Electromagnetic compatibility test and measurement technology surge (impact) immunity test
GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity
test
GB/T 17626.12-2013 Electromagnetic compatibility test and measurement technology Ring wave immunity test
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40434-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40434-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40434-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40434-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|