HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 40426.1-2021 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40426.1-2021: Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 40426.1-2021English359 Add to Cart 4 days [Need to translate] Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications Valid GB/T 40426.1-2021

PDF similar to GB/T 40426.1-2021


Standard similar to GB/T 40426.1-2021

GB/T 40388   GB/T 41061   GB/T 11982.1   GB/T 40426.3   GB/T 40426.2   GB/T 11982.2   

Basic data

Standard ID GB/T 40426.1-2021 (GB/T40426.1-2021)
Description (Translated English) Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Q22
Word Count Estimation 18,196
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 40426.1-2021: Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics - Decorative solid surfacing materials - Part 1.Classification and specifications ICS 83.140.20 CCSQ22 National Standards of People's Republic of China Decorative solid surface material for plastic products Part 1.Classification and Specification (ISO 19712-1.2008, MOD) Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Category 2 5 Requirements 2 6 Test method 5 7 Inspection rules 6 8 Marking, packaging, storage and transportation 7 Appendix A (informative) Structural changes of this document compared with ISO 19712-1.2008 9 Appendix B (informative) Technical differences between this document and ISO 19712-1.2008 and the reasons 10 Appendix C (informative) Hygiene, health and safety information of solid surface materials for indoor use 11 Reference 12

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is the first part of GB/T 40426 "Decorative Solid Surface Materials for Plastic Products". GB/T 40426 has released the following part. ---Part 1.Classification and specification; ---Part 2.Determination of performance of plate-shaped solid surface materials; ---Part 3.Determination of performance of non-plate solid surface materials. This document uses the redrafting law to modify and adopt ISO 19712-1.2008 "Plastic products decorative solid surface materials Part 1.Classification And norms. Compared with ISO 19712-1.2008, this document has many structural adjustments. Appendix A lists this document and ISO 19712-1. The.2008 chapter number comparison list. There are technical differences between this document and ISO 19712-1.2008.The relevant differences have been incorporated into the main text and The margin of the paragraph is marked with a single vertical line (|). A list of these technical differences and their reasons is given in Appendix B. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by the China National Light Industry Council. This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC48). This document was drafted by. China Petroleum & Chemical Corporation Beijing Research Institute of Chemical Industry, Shandong Kelesi New Material Technology Co., Ltd., Guangdong Fusheng New Material Co., Ltd., Guangdong Bitou New Material Technology Co., Ltd., VIA (Shanghai) Co., Ltd., Shandong Shengfu Lai Industrial Co., Ltd., China National Chemical Construction (Beijing) Testing and Certification Technology Co., Ltd., National Chemical Building Materials Testing Center (Materials Testing Department), North Beijing Technology and Business University. The main drafters of this document. Zhu Tiange, Ding Jinhai, Wu Peng, Lei Zhihui, Gong Xuefeng, Zhang Jianlin, Zhao Qing, Yang Huahao, Wang Tao, Xu Bo, Zhao Yanxia and Li Yongquan.

Introduction

This document is intended for use by manufacturers of decorative solid surface materials, assemblers, construction parties and design units. The proposed test method and its performance requirements are closely related to the use of the product. The installation method and process may affect the performance of the product. Health impact. Performance requirements include but are not limited to color and finish, size, appearance quality, resistance to dry heat, resistance to moisture and heat, resistance to falling ball impact, and anti-fouling Resistance, color fastness to light, resistance to cigarette burning, resistance to cold and hot water cycles, load testing and other important properties. GB/T 40426 consists of three parts. ---Part 1.Classification and specification. The purpose is to specify the performance requirements of decorative solid surface materials ---Part 2.Determination of performance of plate-shaped solid surface materials. The purpose is to specify the test method for plate type solid surface materials ---Part 3.Determination of performance of non-plate solid surface materials. The purpose is to specify the test method for non-plate solid surface materials. Decorative solid surface material for plastic products Part 1.Classification and Specification

1 Scope

This document specifies the terms and definitions, classification, requirements, test methods, inspection rules, packaging, marking, transportation and Store. This document applies to plate-type solid surface materials and non-plate-type solid surface materials, and other products with similar purposes can also be implemented by reference.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 2828.1 Sampling inspection procedure by attributes Part 1.Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB 8624 Classification of burning performance of building materials and products GB/T 40426.2-2021 Decorative solid surface materials for plastic products Part 2.Determination of properties of plate-shaped solid surface materials (ISO 19712-2.2007, MOD) GB/T 40426.3-2021 Decorative solid surface materials for plastic products Part 3.Determination of performance Non-plate solid surface materials (ISO 19712-3.2007, MOD) JC/T 908-2013 Artificial stone

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Solid surfacing material; SSM Composed of polymer materials, fillers and pigments, plate-shaped products or non-plate-shaped products formed by processes such as pouring or pressing. Note 1.The solid surface material is made of the same material. Note 2.The surface of the artificial marble surface material is repairable. Note 3.The solid surface material can realize seamless splicing. 3.2 Artificialmarblestonesurfacingmaterial Take polymethyl methacrylate (PMMA) or unsaturated polyester resin (UPR) as the matrix, mainly use aluminum hydroxide as the filler, and add pigment Materials and other auxiliary agents, solid surface materials such as casting molding or vacuum molding or compression molding. 3.3 Artificial quartz stone surfacing material Natural quartz stone (sand, powder), silica sand, tailings slag and other inorganic materials (the main component of which is silica) are used as the main raw materials. Polymer is a solid surface material made of adhesive material.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40426.1-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40426.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40426.1-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40426.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.