|
US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40411-2021: Packaged units for supplying hot, cooling or chilled water
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40411-2021 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Packaged units for supplying hot, cooling or chilled water
| Valid |
GB/T 40411-2021
|
PDF similar to GB/T 40411-2021
Basic data | Standard ID | GB/T 40411-2021 (GB/T40411-2021) | | Description (Translated English) | Packaged units for supplying hot, cooling or chilled water | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P48 | | Word Count Estimation | 18,120 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40411-2021: Packaged units for supplying hot, cooling or chilled water---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Packaged units for supplying hot, cooling or chilled water
ICS 91.140.30
CCSP48
National Standards of People's Republic of China
Modular air conditioning equipment room
Released on 2021-08-20
2022-03-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Classification and marking 2
5 General requirements 3
6 Requirements 6
7 Test method 7
8 Inspection rules 8
9 Marking, packaging, transportation and storage 9
Appendix A (normative) Start-up, operation, flow rate and resource pressure test method 11
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents.
This document was proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China.
This document is under the jurisdiction of the National Standardization Technical Committee for HVAC and Purification Equipment (SAC/TC143).
Drafting organizations of this document. Shanghai Ilifa HVAC Technology Co., Ltd., Tongji University, National Air Conditioning Equipment Quality Supervision and Inspection Center, Akcome
Enterprise Group (Shanghai) Co., Ltd., Landsea Group Co., Ltd., Shanghai Landsea Planning and Architectural Design Co., Ltd., Hangzhou Urban Construction Development
Group Co., Ltd., Tongji University Architectural Design and Research Institute (Group) Co., Ltd., Tus Design Group Co., Ltd., Jiangsu Saide Green
Color Construction Engineering Technology Research Center, Shanghai Construction Engineering First Construction Group Co., Ltd. Installation Engineering Company, Nanjing Architectural Design and Research Institute Co., Ltd.
Company, Shanghai Building Materials Industry Association, Shanghai First Refrigeration Factory Co., Ltd., York (China) Trading Co., Ltd., McQuay Central
Air Conditioning Co., Ltd., Shanghai Xinyang New Energy Technology Co., Ltd., Jiangxi Oulong Industrial Co., Ltd., Jiangsu Runzhi Building Technology Co., Ltd.
Company, Nanjing Yuhe Construction Co., Ltd., Shanghai Jinjiang Capital Co., Ltd., Beijing Huaqing Geothermal Development Group Co., Ltd., Jigao Construction
Industry Co., Ltd.
The main drafters of this document. Zheng Like, Zhou Xiang, Cao Yang, Zhang Xu, Yang Zheng, Li Zhiqiang, Gao Jun, Su Xing, Ye Wei, Wang Liyang, Yang Ke, Wen Tao,
Liu Linchuan, Wang Jian, Zheng Xiaowei, Qian Peiru, Zhuang Yuezhong, Zhou Yuhui, Yue Kun, Zhang Jianzhong, Xiao Qin, Lu Guangjun, Xu Yang, Cheng Hengsheng, Zhu Hanbao,
Zhu Xinming, Wu Wansong, Tu Daojun, Qi Shoubin, Zhang Xin, Han Minxia, Feng Tingting.
Modular air conditioning equipment room
1 Scope
This document specifies the terms and definitions, classification and marking, general requirements, requirements, test methods, and inspection regulations for modular air conditioning equipment room equipment.
Then, marking, packaging, transportation and storage.
This document is applicable to the production and inspection of modular air-conditioning equipment room equipment (hereinafter referred to as "module equipment").
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 983 stainless steel electrode
GB/T 2423.17 Environmental testing of electrical and electronic products Part 2.Test method Test Ka. Salt spray
GB/T 3091 Welded steel pipe for low pressure fluid transportation
GB/T 3216 Hydraulic Performance Acceptance Test of Rotary Power Pump Level 1, Level 2, and Level 3
GB/T 3797-2016 Electrical control equipment
GB/T 4208 Shell protection grade (IP code)
GB/T 5117 Non-alloy steel and fine grain steel welding rod
GB/T 5226.1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical conditions
GB/T 7251.1-2013 Low-voltage switchgear and control equipment Part 1.General
GB/T 7251.8 Low-voltage switchgear and control equipment-Part 8.General technical requirements for intelligent complete equipment
GB/T 8163 Seamless steel pipe for conveying fluid
GB/T 8175 Design Guidelines for Equipment and Piping Insulation
GB/T 12241 General requirements for safety valves
GB/T 13306 signs
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 14976 Stainless steel seamless steel pipe for fluid transportation
GB/T 26759 Technical specification for energy-saving control device of central air-conditioning water system
GB/T 29247 General test methods for industrial automation instruments
JB/T 4330-1999 Determination of noise from refrigeration and air-conditioning equipment
JB/T 10394.1 General technical conditions for painting equipment Part 1.Sheet metal parts
NB/T 47004.1 Plate heat exchanger Part 1.Removable plate heat exchanger
QB/T 4507 Plumbing Pipe Fittings Copper Filter
BSEN13831 Closed expansion vessel with built-in diaphragm for water supply equipment (Closedexpansionvesselswithbuilt-
indiaphragmforinstalationinwater)
3 Terms and definitions
The following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40411-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40411-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40411-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40411-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|