|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39212-2020: Drill string compensating system of floating drilling unit
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39212-2020 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Drill string compensating system of floating drilling unit
| Valid |
GB/T 39212-2020
|
PDF similar to GB/T 39212-2020
Standard similar to GB/T 39212-2020 GB/T 18572 GB/T 42052 GB/T 39209 Basic data | Standard ID | GB/T 39212-2020 (GB/T39212-2020) | | Description (Translated English) | Drill string compensating system of floating drilling unit | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U35 | | Classification of International Standard | 47.020.20 | | Word Count Estimation | 14,197 | | Date of Issue | 2020-10-11 | | Date of Implementation | 2021-05-01 | | Regulation (derived from) | National Standard Announcement No. 21 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39212-2020: Drill string compensating system of floating drilling unit---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Drill string compensating system of floating drilling unit
ICS 47.020.20
U35
National Standards of People's Republic of China
Floating drilling ship drill string heave compensation device
2020-10-11 released
2021-05-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Classification, composition and product marking 2
4.1 Classification 2
4.2 Composition 4
4.3 Product marking 4
5 Requirements 5
5.1 Design 5
5.2 Material 6
5.3 Quality and dimensional tolerances 6
5.4 Appearance quality 6
5.5 Welding quality 6
5.6 Strength 6
5.7 Pipe tightness 7
5.8 Compensation performance 7
5.9 Environmental adaptability 7
6 Test method 7
6.1 Quality and dimensional tolerance 7
6.2 Appearance quality 7
6.3 Welding quality 8
6.4 Strength 8
6.5 Pipe tightness 8
6.6 Compensation performance 8
6.7 Environmental adaptability 8
7 Inspection rules 8
7.1 Inspection classification 8
7.2 Type inspection 8
7.3 Factory inspection 9
8 Marking, packaging, transportation and storage 10
8.1 Sign 10
8.2 Packaging 10
8.3 Transportation 10
8.4 Storage 10
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Marine Machinery Standardization Technical Committee (SAC/TC137).
Drafting organizations of this standard. Guangdong Jingin Offshore Engineering Co., Ltd., China State Shipbuilding Industry Research Institute, China Shipbuilding Industry Corporation
Agency, CNOOC Research Institute Co., Ltd., Guangdong Jingin Marine Engineering Innovation Research Co., Ltd.
The main drafters of this standard. Li Guangyuan, Wu Pingping, Xu Liangbin, Duan Mingxing, Lu Jun, Mai Zhihui, Zhang Jingbo, Ma Zhenjun, Zhang Shuaijun,
Deng Dahong, Ouyang Tao, Yang Qingxia, Zhou Jianliang, Liu Wei, Chen Feng, Li Guoqing, Li Yang, Xu Tianyin.
Floating drilling ship drill string heave compensation device
1 Scope
This standard specifies the classification, composition and products of hydraulic drill string compensation devices for floating drilling ships (hereinafter referred to as drill string compensation devices)
Marking, requirements, test methods, inspection rules, signs, packaging, transportation and storage, etc.
This standard applies to the design, manufacture and acceptance of drill string compensation devices.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging, Storage and Transportation Graphic Mark
GB/T 700 carbon structural steel
GB/T 712-2011 Structural steel for ships and marine engineering
GB/T 1184-1996 shape and position tolerance without tolerance value
GB/T 1591 Low-alloy high-strength structural steel
GB/T 1720 Determination of paint film adhesion
GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance
GB/T 1958 Product Geometric Technical Specification (GPS) Geometric Tolerance Testing and Verification
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB 3836 (all parts) explosive atmosphere
GB/T 5099 (all parts) seamless steel gas cylinder
GB/T 5267.1 Fastener plating
GB/T 5267.4 Fastener surface treatment corrosion-resistant stainless steel passivation treatment
GB/T 6388 Transport packaging receiving and dispatching signs
Review of GB/T 6463 Metal and Other Inorganic Coating Thickness Measurement Methods
GB/T 7826 System Reliability Analysis Technology Failure Mode and Effect Analysis (FMEA) Program
GB/T 8163-2018 Seamless steel pipe for conveying fluid
GB/T 13306 signs
GB/T 13342 General technical conditions for marine reciprocating hydraulic cylinders
GB/T 14039-2002 Code of pollution grade of solid particles in hydraulic transmission oil
GB/T 14976-2012 Stainless steel seamless steel pipe for fluid transportation
GB/T 17107 Structural steel grades and mechanical properties for forgings
GB/T 19190 Oil and gas industry drilling and oil extraction lifting equipment
GB/T 20663 Energy storage pressure vessel
GB/T 23507.1 Specification for electrical equipment for oil drilling rigs Part 1.Main motor
GB/T 25295 Safety Design Guidelines for Electrical Equipment
GB/T 28911 Oil and Gas Drilling Engineering Terminology
GB/T 30790.5 Paint and varnish protective coating system for corrosion protection of steel structures Part 5.Protective coating system
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39212-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39212-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39212-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39212-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|