HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 39210-2020 English PDF

US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39210-2020: Draught and soil loading system of hopper dredger
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 39210-2020English339 Add to Cart 4 days [Need to translate] Draught and soil loading system of hopper dredger Valid GB/T 39210-2020

Standard similar to GB/T 39210-2020

GB/T 11633   GB/T 39213   

Basic data

Standard ID GB/T 39210-2020 (GB/T39210-2020)
Description (Translated English) Draught and soil loading system of hopper dredger
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard U62
Classification of International Standard 47.020.70
Word Count Estimation 18,156
Date of Issue 2020-10-11
Date of Implementation 2021-05-01
Regulation (derived from) National Standard Announcement No. 21 of 2020
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 39210-2020: Draught and soil loading system of hopper dredger

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Draught and soil loading system of hopper dredger ICS 47.020.70 U62 National Standards of People's Republic of China Draught loading system for trailing suction dredger 2020-10-11 released 2021-05-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Preface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Requirements 2 4.1 Composition and interface 2 4.2 Function 2 4.3 Performance 3 4.4 Appearance quality 3 4.5 Environmental adaptability 3 4.6 Electromagnetic compatibility 3 4.7 Enclosure protection 4 4.8 Voltage and frequency 4 4.9 Insulation resistance 4 4.10 Insulation strength 4 5 Test method 4 5.1 Function 4 5.2 Performance 4 5.3 Appearance quality 4 5.4 Environmental adaptability 4 5.5 Electromagnetic compatibility 4 5.6 Enclosure protection 4 5.7 Voltage and frequency 5 5.8 Insulation resistance 5 5.9 Insulation strength 5 6 Inspection rules 5 6.1 Inspection classification 5 6.2 Type inspection 5 6.3 Factory inspection 6 7 Marking, packaging, transportation and storage 6 7.1 Mark 6 7.2 Packaging 7 7.3 Transportation 7 7.4 Storage 7 Appendix A (Normative Appendix) Functional Test Method 8 Appendix B (Normative Appendix) Performance Test Method 12

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the Ministry of Transport of the People's Republic of China. This standard is under the jurisdiction of the National Port Standardization Technical Committee (SAC/TC530). Drafting organizations of this standard. China Communications Construction Co., Ltd., CCCC Dredging (Group) Co., Ltd., CCCC Shanghai Waterway Bureau Co., Ltd., China Communications Dredging Technology and Equipment National Engineering Research Center Co., Ltd., China-Hong Kong Dredging Co., Ltd., Shanghai Communications Construction General Contracting Co., Ltd. Company, CCCC Shanghai Navigation Bureau Waterway Construction Co., Ltd., CCCC Tianjin Waterway Bureau Co., Ltd., CCCC Guangzhou Waterway Bureau Co., Ltd., CCCC Tianjin Port Air Survey Design and Research Institute Co., Ltd., CCCC Guangzhou Water Transport Engineering Design and Research Institute Co., Ltd., CCCC Xingyu Technology Co., Ltd. The main drafters of this standard. Miao Yuanquan, Tian Junfeng, Hou Xiaoming, Zhu Rong, Li Ning, Li Jingui, Gu Yong, Liu Ruoyuan, Gu Ming, Liu Nianjun, Ding Shuyou, Zhang Hongsheng, Ding Qi, Yang Shu, Qiu Wenfeng, Pang Jingdun, Zhong Zhisheng. Draught loading system for trailing suction dredger

1 Scope

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of the draught loading system of trailing suction dredgers. This standard is applicable to the design, manufacture, modification, maintenance and acceptance of the draught loading system of trailing suction dredgers. The draught loading system of mud barge can be used as reference. Note. The abbreviation form of draught loading system is DSLS, which is used below.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 191-2008 Packaging, storage and transportation pictorial signs GB/T 2423.1 Environmental testing of electrical and electronic products Part 2.Test method Test A. Low temperature GB/T 2423.2 Environmental testing of electric and electronic products Part 2.Test method Test B. High temperature GB/T 2423.3 Environmental Test Part 2.Test Method Test Cab. Constant Damp Heat Test GB/T 2423.4 Environmental testing of electrical and electronic products Part 2.Test method Test Db. Alternating damp heat (12h 12h cycle) GB/T 2423.10 Environmental Test Part 2.Test Method Test Fc. Vibration (Sine) GB/T 2423.16-2008 Environmental testing of electric and electronic products Part 2.Test method Test J and guideline. Mould GB/T 2423.17 Environmental testing of electrical and electronic products Part 2.Test method Test Ka. Salt spray GB/T 2423.101 Environmental testing of electrical and electronic products Part 2.Test method Test. Tilt and swing GB/T 4208 Shell protection grade (IP code) GB/T 6587-2012 General Specification for Electronic Measuring Instruments GB/T 13384 General technical conditions for packaging of mechanical and electrical products GB/T 15479-1995 Technical requirements and test methods for insulation resistance and insulation strength of industrial automation instruments GB/T 17626.2-2018 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test GB/T 17626.5-2019 Electromagnetic compatibility test and measurement technology surge (impact) immunity test GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test GB/T 17843-2007 Terminology for ships and marine technical dredgers GB/T 29135-2012 Trailing Suction Dredger Dredging Monitoring System Rules for the Classification of Sea-going Steel Ships (2018) China Classification Society

3 Terms and definitions

The following terms and definitions defined in GB/T 17843-2007 and GB/T 29135-2012 apply to this document.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39210-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39210-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39210-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39210-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.