|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39187-2020: Jack up conductor/blow out preventer tension compensation system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39187-2020 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Jack up conductor/blow out preventer tension compensation system
| Valid |
GB/T 39187-2020
|
PDF similar to GB/T 39187-2020
Standard similar to GB/T 39187-2020 GB/T 18572 GB/T 42052 GB/T 39209 Basic data | Standard ID | GB/T 39187-2020 (GB/T39187-2020) | | Description (Translated English) | Jack up conductor/blow out preventer tension compensation system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U35 | | Classification of International Standard | 47.020.20 | | Word Count Estimation | 14,137 | | Date of Issue | 2020-10-11 | | Date of Implementation | 2021-05-01 | | Regulation (derived from) | National Standard Announcement No. 21 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39187-2020: Jack up conductor/blow out preventer tension compensation system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Jack up conductor/blow out preventer tension compensation system
ICS 47.020.20
U35
National Standards of People's Republic of China
Self-elevating platform riser/blowout preventer tension compensation system
2020-10-11 released
2021-05-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Classification, composition and marking 2
4.1 Classification and composition 2
4.2 Product marking and outline drawing 2
5 Requirements 4
5.1 Design 4
5.2 Material 5
5.3 Welding 5
5.4 Appearance 5
5.5 Performance 5
5.6 Dimensional tolerance and weight 6
5.7 Enclosure protection 6
5.8 Security 6
5.9 Environmental adaptability 6
5.10 Electromagnetic compatibility 6
6 Test method 7
6.1 Welding 7
6.2 Appearance 7
6.3 Performance 7
6.4 Dimensional tolerance and weight 7
6.5 Shell protection 7
6.6 Security 7
6.7 Environmental adaptability 8
6.8 Electromagnetic compatibility 8
7 Inspection rules 8
7.1 Inspection classification 8
7.2 Type inspection 8
7.3 Factory inspection 9
8 Marking, packaging, transportation and storage 9
8.1 Sign 9
8.2 Packaging 10
8.3 Transportation 10
8.4 Storage 10
Appendix A (informative appendix) Technical conditions agreed upon between the supplier and the purchaser 11
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Marine Machinery Standardization Technical Committee (SAC/TC137).
Drafting organizations of this standard. Guangdong Jingin Offshore Engineering Co., Ltd., China State Shipbuilding Industry Research Institute, China Shipbuilding Industry Corporation
Company, China Oilfield Services Co., Ltd., Guangdong Mechanical Engineering Society, Guangdong Jingin Marine Engineering Innovation Research Co., Ltd.
The main drafters of this standard. Mai Zhihui, Li Guangyuan, Liu Hongbo, Ouyang Tao, Chen Feng, Yang Qingxia, Army, Duan Mingxing, Liu Yihua, Wu Pingping,
Ma Zhenjun, Zhang Jingbo, Deng Dahong, Wei Huaxing, Liang Yuanhua, Zhao Yixiang, Li Guoqing, Wu Han.
Self-elevating platform riser/blowout preventer tension compensation system
1 Scope
This standard specifies the classification, composition, and composition of the tension compensation system for jack-up platform riser/blowout preventer (hereinafter referred to as “tension compensation system”)
Marking, requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to the design, manufacture and acceptance of tension compensation systems.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging, Storage and Transportation Graphic Mark
GB/T 712-2011 Structural steel for ships and marine engineering
GB/T 1720-1979 Determination of paint film adhesion
GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance
GB 3836.1 Explosive environment Part 1.General requirements for equipment
GB/T 4208-2017 Enclosure protection grade (IP code)
GB/T 5099 (all parts) seamless steel gas cylinder
GB/T 6388 Transport packaging receiving and dispatching signs
GB/T 7826 System Reliability Analysis Technology Failure Mode and Effect Analysis (FMFA) Procedure
GB/T 8163-2018 Seamless steel pipe for conveying fluid
GB/T 8918 Wire Rope for Important Use
GB/T 10250-2007 Electromagnetic compatibility of marine electrical and electronic equipment
GB/T 13306 signs
GB/T 13342 General technical conditions for marine reciprocating hydraulic cylinders
GB/T 14039-2002 Code of pollution grade of solid particles in hydraulic transmission oil
GB/T 14736 Technical conditions for the use of lifting rings for port handling
GB/T 14976-2012 Stainless steel seamless steel pipe for fluid transportation
GB/T 20663 Energy storage pressure vessel
GB/T 25133 Hydraulic system assembly pipeline flushing method
GB/T 25444 (all parts) Electrical installations for mobile and fixed offshore installations
GB/T 25854 D-shaped and bow-shaped forged shackles for general lifting
GB/T 30507 Guidelines for sampling and cleanliness determination of particulate pollutants in lubricating oil systems and hydraulic oil systems for ships and marine technology
GB/T 30790.5 Paint and varnish protective coating system for corrosion protection of steel structures Part 5.Protective coating system
GB/T 31415 Paints and varnishes performance requirements for protective coating systems for marine buildings and related structures
GB/T 32474 Rubber hoses and hose assemblies for oil drilling well control equipment
GB/T 33145 Large-volume steel seamless gas cylinder
CB/T 1102 General technical conditions for marine hydraulic systems
CB1146.2 Environmental testing and engineering guidelines for naval equipment
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39187-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39187-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39187-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39187-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|