|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3871.18-2022: Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface
Status: Valid GB/T 3871.18: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3871.18-2022 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface
| Valid |
GB/T 3871.18-2022
|
| GB/T 3871.18-2006 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Agricultural tractors -- Test procedures -- Part 18: Hydraulic power at tractor/implement interface
| Obsolete |
GB/T 3871.18-2006
|
PDF similar to GB/T 3871.18-2022
Basic data | Standard ID | GB/T 3871.18-2022 (GB/T3871.18-2022) | | Description (Translated English) | Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T61 | | Word Count Estimation | 15,180 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 3871.18-2022: Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65.060.10
CCST61
National Standards of People's Republic of China
Replacing GB/T 3871.18-2006
Agricultural tractor test procedures
Part 18.Hydraulic power at the tractor and implement interface
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is part 18 of GB/T 3871 "Test Procedures for Agricultural Tractors". GB/T 3871 has published the following parts.
--- Part 1.General requirements;
--- Part 2.Measurement of parameters of the whole machine;
--- Part 3.Power take-off shaft power test;
--- Part 4.Lifting capacity of rear three-point hitch;
--- Part 5.Turning circle and passing circle diameter;
--- Part 6.Determination of braking performance of agricultural and forestry vehicles;
--- Part 7.The driver's field of vision;
--- Part 8.Noise measurement;
--- Part 9.Traction power test;
--- Part 10.Low temperature starting;
--- Part 11.High temperature performance test;
--- Part 12.Use test;
--- Part 13.Measurement of exhaust smoke;
--- Part 14.Partial power output power take-off shaft for non-mechanical transmission;
--- Part 15.Centroids;
--- Part 16.Determination of shaft power;
--- Part 17.Engine air filters;
--- Part 18.Hydraulic power at the interface between the tractor and the implement;
--- Part 19.Wheeled tractor steering performance;
--- Part 20.Turbulence test;
--- Part 21.Stability.
This document replaces GB/T 3871.18-2006 "Test Procedures for Agricultural Tractors - Part 18.Hydraulic pressure at the interface between the tractor and the implement
power".
Compared with GB/T 3871.18-2006, the main technical differences between this document and GB/T 3871.18-2006 are as follows.
--- Changed the standard scope (see Chapter 1, Chapter 1 of the.2006 edition);
--- Changed terms and definitions (see Chapter 3, Chapter 3 of the.2006 edition);
--- Changed the provisions of "run-in and initial adjustment" (see 5.2, 5.2 of the.2006 edition);
--- Changed the test conditions and test procedures for steady state pressure (see 6.1, 6.1 of the.2006 edition);
--- Changed the provisions of the effective hydraulic pressure test report (see 6.3, 6.3 of the.2006 edition);
--- Changed the test conditions, test procedures and test report provisions of the hydraulic power test (see Chapter 7,.2006 edition of the 7th
chapter);
--- Changed the test report format (see Appendix A, Appendix A of the.2006 edition).
This document is modified to adopt ISO /OECD789-10.2006 "Test Procedures for Agricultural Tractors - Part 10.Tractor and Implement Connections"
Hydraulic power at the mouth".
The technical differences between this document and ISO /OECD 789-10.2006 and their reasons are as follows.
--- Changed the scope (see Chapter 1) to meet industry requirements;
--- Changed the definition of the term "agricultural tractor" (see 3.1), keeping the definition of "agricultural tractor" in ISO 12934.2021
consistent;
--- Changed the regulation of the speed range when the engine is calibrated at the speed (see 5.2.4), in order to avoid ambiguity;
--- Unify the terms (see 6.1.1, 6.1.2.2, 6.3.2, A.4) to avoid ambiguity;
--- Added the provisions on the standard flow of tractors of other suspension categories (see 6.1.2.2, 6.1.2.3, 6.1.2.4), and increased the scope of application;
--- Changed the test content [see 6.3.1b)] to maintain the consistency of the standard;
--- Changed the tractor standard flow output state [see 6.3.2b)], expanded the scope to meet industry requirements;
--- Increased the specification range of hydraulic quick-change joints [see 7.1a)] to meet industry requirements;
--- Increase the hydraulic power test provisions for hydraulic joint pairs (see 7.2.2), in order to test with the OECD official for agricultural and forestry tractors.
It is consistent with the provisions of CODE2.2018 of the inspection standard rules;
--- Changed the title (see A.3, A.4) to clearly express the main content of the test results;
--- Delete the hydraulic oil temperature target value (see ISO /OECD789-10.2006 A.3, A.4), expand the tractor structure and configuration
need;
--- Refined the content of the test report (see A.3) so as to be consistent with the OECD Official Test Standard Rules for Agricultural and Forestry Tractors CODE2.
Consistent with the provisions of.2018;
--- Delete the reference to the OECD rules (see A.3 of ISO /OECD789-10.2006) to harmonize the standard;
--- Added a description of the selected test (see A.4), so as to be consistent with the OECD Official Test Standard Rules for Agricultural and Forestry Tractors
The provisions of CODE2.2018 are consistent;
--- Added the content of the test report (see A.4) to unify the standard;
--- Combine the test items of effective differential pressure (see A.4) to unify the standard;
--- Delete the provisions of the standard flow (see ISO /OECD789-10.2006 A.4) to meet the test needs.
The following editorial changes have been made to this document.
--- In order to harmonize with existing standards, the name of the standard is changed to "Agricultural Tractor Test Procedures - Part 18.Interface between tractors and implements"
hydraulic power";
--- Deleted part of "Note" in "Terms and Definitions";
--- For terms from ISO 10448.1994, the entry number has been added;
--- Changed the symbol of the maximum sustainable hydraulic power.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Tractor Standardization Technical Committee (SAC/TC140).
This document is drafted by. Luoyang Xiyuan Vehicle and Power Inspection Institute Co., Ltd., Shandong Academy of Agricultural Machinery.
The main drafters of this document. Jia Fang, Han Xingchang, Yan Jie, Wang Yongjian, Yan Xiaofang, Chen Song, Shang Xiangsheng.
This document was first published in.2006 and this is the first revision.
Introduction
The test method is an important means to test the quality of product performance. Different test methods yield different test results.
The purpose of the standard is to achieve a standard, a test, and industry-wide recognition. As the power source of mobile agricultural machinery, tractors work
The environment is harsh and there are many requirements related to personal safety and environmental hygiene, and a series of test methods are needed to determine whether its performance meets the requirements.
Check it out. In this regard, my country has established a complete set of tractor tests by studying and referring to international standards and foreign advanced standards.
method standard. GB/T 3871 aims to establish the test procedures for checking the performance indicators of tractors, and 21 parts have been issued.
--- Part 1.General requirements;
--- Part 2.Measurement of parameters of the whole machine;
--- Part 3.Power take-off shaft power test;
--- Part 4.Lifting capacity of rear three-point hitch;
--- Part 5.Turning circle and passing circle diameter;
--- Part 6.Determination of braking performance of agricultural and forestry vehicles;
--- Part 7.The driver's field of vision;
--- Part 8.Noise measurement;
--- Part 9.Traction power test;
--- Part 10.Low temperature starting;
--- Part 11.High temperature performance test;
--- Part 12.Use test;
--- Part 13.Measurement of exhaust smoke;
--- Part 14.Partial power output power take-off shaft for non-mechanical transmission;
--- Part 15.Centroids;
--- Part 16.Determination of shaft power;
--- Part 17.Engine air filters;
--- Part 18.Hydraulic power at the interface between the tractor and the implement;
--- Part 19.Wheeled tractor steering performance;
--- Part 20.Turbulence test;
--- Part 21.Stability.
The purpose of the test procedure standard is to specify uniform test procedures and methods.
Began the research work of tractor test method standard. In 1983, the tractor test method standard was first issued, and then referenced to international standards.
The second and third editions were released in.1993 and.2006, respectively. With the continuous progress of tractor technology and the development of foreign trade, new
needs and new proposals are constantly being generated.
The first edition of ISO 789-10 was formulated in.1996, and my country adopted this version to formulate GB/T 3871.18-2006,.2006
ISO 789-10 has been revised. In view of this, it is necessary to revise and improve GB/T 3871.18 to continuously adapt to the new needs of tractor technology development.
begging. This revision of GB/T 3871.18 mainly considers new structural types of tractors and new detection technology, thereby improving the test efficiency
rate and standard adaptability, better serve technology development, and promote trade, exchanges and technical cooperation.
Agricultural tractor test procedures
Part 18.Hydraulic power at the tractor and implement interface
1 Scope
This document specifies the tests for the determination of hydraulic pressure and hydraulic power on the external hydraulic output at the connection between agricultural tractors and implements
program.
This document applies to agricultural tractors with external hydraulic output.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 1593-2015 Agricultural wheeled tractor rear mounted three-point hitch 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4 categories
(ISO 730.2009, MOD)
Note. There is no technical difference between the quoted content of GB/T 1593-2015 and the quoted content of ISO 730.2009.
GB/T 3141-1994 ISO Viscosity Classification of Industrial Liquid Lubricants (ISO 3448.1992, eqv)
Note. There is no technical difference between the quoted content of GB/T 3141-1994 and ISO 3448.1992.
GB/T 5862-2020 General-purpose hydraulic quick-change joints for agricultural tractors and machinery (ISO 5675.2008, MOD)
Note. There is no technical difference between the quoted content of GB/T 5862-2020 and the quoted content of ISO 5675.2008.
implements)
3 Terms and Definitions
ISO 10448.1994 and the following terms and definitions apply to this document.
3.1
agricultural tractor agriculturaltractor
Wheeled, tracked or wheel-tracked self-propelled agricultural vehicles with at least two axles, capable of hauling, pushing, carrying, providing drive
The power of the implement, the function of pulling agricultural trailers and agricultural implements, or a combination of the above functions, for agricultural (including forestry) operations, can be equipped with loading
platform.
Note. The maximum design speed of agricultural vehicles is not less than 6km/h, and can be equipped with more than one seat.
[Source. ISO 12934.2021, 3.2.1]
3.2
Maximum engine speed maximumenginespeed
Engine speed when the governor is in the maximum position.
3.3
Engine rated speed ratedenginespeed
The speed at which the engine is continuously running at full load as specified by the tractor manufacturer.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3871.18-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 3871.18-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3871.18-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3871.18-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3871.18-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3871.18-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|