|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38467-2020: Technical specification of modified wood for furniture
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38467-2020 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Technical specification of modified wood for furniture
| Valid |
GB/T 38467-2020
|
PDF similar to GB/T 38467-2020
Basic data | Standard ID | GB/T 38467-2020 (GB/T38467-2020) | | Description (Translated English) | Technical specification of modified wood for furniture | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y82 | | Classification of International Standard | 97.140 | | Word Count Estimation | 12,157 | | Date of Issue | 2020-03-06 | | Date of Implementation | 2020-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 38467-2020: Technical specification of modified wood for furniture---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Technical requirements for modified wood for furniture)
ICS 97.140
Y82
National Standards of People's Republic of China
Technical conditions of modified wood for furniture
Released on 2020-03-06
2020-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Product Category 3
5 Requirement 4
6 Test method 5
7 Inspection rules 7
8 Signs, packaging, instructions for use, transportation and storage 9
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some content of this document may involve patents. The issuer of this document does not assume responsibility for identifying these patents.
This standard was proposed by the China National Light Industry Council.
This standard is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480).
This standard was drafted by. Nanjing Forestry University, Yihua Life Technology Co., Ltd., Xiamen Jinpai Kitchen Cabinet Co., Ltd., Jiangsu Ai
Meisen Wood Co., Ltd., Jiangxi Free Kingdom Furniture Co., Ltd., Shunde Vocational and Technical College, Guangdong Federation Furniture Group Co., Ltd., Dehua
Bunny Decoration New Materials Co., Ltd., Zhongshan Taixing Furniture Co., Ltd., Dehua Group Holdings Co., Ltd., Liyang City Fuwode
Drying Equipment Co., Ltd., Shanghai Quality Supervision and Inspection Technology Research Institute, Jiangsu Province Collaborative Innovation Center for Efficient Processing and Utilization of Forestry Resources, Jiangxi
Jiangsu Furniture and Home Furnishing Product Design Engineering Technology Research Center, Jiangsu Industrial Design Center, Xiamen S & P Standardization Service Co., Ltd., Anji
County Shengxin Office Furniture Co., Ltd.
The main drafters of this standard. Wu Zhihui, Xiong Xianqing, Xu Wei, Huang Qiongtao, Liu Xiaohong, Yang Ziqian, Gu Yanting, Liu Min, Lin Jianxuan, Li Li,
Gu Jianxia, Zhou Shanlin, Zhan Xianxu, Li Xingchang, Zhang Jian, Shen Binghuan, Xu Jun, Chen Zhizhong, Chen Yulin.
Technical conditions of modified wood for furniture
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules and signs, packaging,
Instructions, transportation, storage.
This standard applies to modified wood for furniture. Modified wood for other purposes can be implemented by reference.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 153 Conifer Sawn Timber
GB/T 1927 Wood physical mechanics sample collection method
GB/T 1928 General rules of wood physical mechanics test method
GB/T 1929 Timber physics and mechanics test material sawing and sample interception method
GB/T 1931 Determination method of wood moisture content
GB/T 1932 Determination method of wood shrinkage
GB/T 1934.2 Determination method of wood swelling
GB/T 2828.1-2012 Counting Sampling Inspection Procedure Part 1. Sampling by Batch Inspection Retrieved by Acceptance Quality Limit (AQL)
plan
GB/T 4817 Hardwood sawn timber
GB/T 4822 Sawn timber inspection
GB/T 13942.1-2009 Durability of wood Part 1. Laboratory test methods for natural corrosion resistance
GB/T 14019-2009 Terminology for wood preservation
GB/T 17657-2013 Test methods for physical and chemical properties of wood-based panels and decorative wood-based panels
GB 20286-2006 flammability requirements and identification of flame retardant products and components in public places
GB/T 27651-2011 Classification and requirements for the use of anticorrosive wood
GB/T 28202-2011 Furniture industry terms
GB/T 28992-2012 heat treatment solid wood floor
GB/T 31747-2015 Carbonized wood
GB/T 31754-2015 Technical Specification for Modified Wood Production
GB/T 33022-2016 Classification and labeling of modified wood
GB/T 33040-2016 Identification method of heat-treated wood
GB/T 50329-2012 Standard for test methods of wooden structures
LY/T 1925-2010 Anti-corrosion wood product label
3 Terms and definitions
GB/T 28202-2011, GB/T 14019-2009, GB/T 28992-2012, GB/T 31747-2015, GB/T 31754-
|