GB/T 38466-2020 (GBT 38466-2020)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
GB/T 38466-2020	English	299	Add to Cart	4 days	General technical requirements for rattan furniture	GB/T 38466-2020	Valid	GB/T 38466-2020

GB/T 38466-2020
(General technical requirements for rattan furniture)
ICS 97.140
Y80
National Standards of People's Republic of China
General technical conditions of rattan furniture
Released on 2020-03-06
2020-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Product Category 3
5 Requirement 4
6 Test method 7
7 Inspection rules 10
8 Signs, instructions for use, packaging, transportation and storage 12
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some content of this document may involve patents. The issuer of this document does not assume responsibility for identifying these patents.
This standard was proposed by the China National Light Industry Council.
This standard is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480).
This standard was drafted by. Nanjing Forestry University, Jiangxi Furniture Product Quality Supervision and Inspection Center, Shunde Vocational and Technical College, Guangzhou Nansha
Aomeifa Metal Plastic Products Co., Ltd., Dehua Bunny Decoration New Materials Co., Ltd., Zhongshan Taixing Furniture Co., Ltd., Dehuaji
Mission Holdings Co., Ltd., Shanghai Quality Supervision and Inspection Technology Research Institute, Jiangsu Province Collaborative Innovation Center for Efficient Processing and Utilization of Forestry Resources,
Jiangsu Provincial Furniture and Home Furnishing Product Design Engineering Technology Research Center, Jiangsu Industrial Design Center, Mingzhu Furniture Co., Ltd., (Yiliya)
Xiamen Ecological Development Co., Ltd. and Dongguan Huake Toni Instruments Co., Ltd.
The main drafters of this standard. Wu Zhihui, Gu Yanting, Xu Wei, Ye Qingyi, Liu Xiaohong, Xiong Xianqing, Liu Min, Qi Kun, Zhan Xianxu, Li Xingchang,
Zhang Jian, Xu Jun, Wang Jianbing, Chen Zhiyong, Li Zhun.
General technical conditions of rattan furniture
1 Scope
This standard specifies the terms and definitions of rattan furniture, product classification, requirements, test methods, inspection rules and signs, instructions for use, packaging,
Transportation and storage.
This standard applies to rattan furniture products, rattan parts of other furniture can refer to the implementation.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 250 Gray Sample Card for Textile Colorfastness Test to Evaluate Discoloration
GB/T 2828.1-2012 Counting Sampling Inspection Procedure Part 1. Sampling by Batch Inspection Retrieved by Acceptance Quality Limit (AQL)
plan
GB/T 2912.1 Determination of formaldehyde in textiles. Part 1. Free and hydrolyzed formaldehyde (water extraction method)
GB/T 3324-2017 General technical conditions for wooden furniture
GB/T 3325 General technical requirements for metal furniture
GB/T 4893.1 Determination method of cold liquid resistance on furniture surface
GB/T 4893.2 Determination of moisture and heat resistance of furniture surface
GB/T 4893.3 Dry heat resistance test method for furniture surface
GB/T 5296.6 Instructions for use of consumer products Part 6. Furniture
GB/T 10357.1 Mechanical properties of furniture Part 1. Table strength and durability
GB/T 10357.2 Furniture mechanical properties test Part 2. Stability of chairs and stools
GB/T 10357.3 Furniture mechanical properties test. Part 3. Strength and durability of chairs and stools
GB/T 10357.4 Furniture mechanical properties test Part 4. Cabinet stability
GB/T 10357.5 Furniture mechanical properties test Part 5. Cabinet strength and durability
GB/T 10357.6 Furniture mechanical properties test Part 6. Strength and durability of single bed
GB/T 10357.7 Furniture Mechanical Properties Test Part 7. Table Stability
GB/T 13942.1-2009