|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38461-2020: Blow mould for PET bottle in food field
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38461-2020 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Blow mould for PET bottle in food field
| Valid |
GB/T 38461-2020
|
PDF similar to GB/T 38461-2020
Basic data | Standard ID | GB/T 38461-2020 (GB/T38461-2020) | | Description (Translated English) | Blow mould for PET bottle in food field | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J83 | | Classification of International Standard | 55.200 | | Word Count Estimation | 14,170 | | Date of Issue | 2020-03-06 | | Date of Implementation | 2020-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 38461-2020: Blow mould for PET bottle in food field---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Blow mould for PET bottle in food field
ICS 55.200
J83
National Standards of People's Republic of China
Blow molding machine for PET bottles for food packaging
Released on 2020-03-06
2020-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some content of this document may involve patents. Publication of this document
The institution does not assume responsibility for identifying these patents.
This standard was proposed by the China National Machinery Industry Federation.
This standard is under the jurisdiction of the National Food Packaging Machinery Standardization Technical Committee (SAC/TC494).
This standard was mainly drafted by. Guangdong Xinglian Precision Machinery Co., Ltd., Guangzhou Tech-Long Packaging Machinery Co., Ltd., Hangzhou Zhongya
Machinery Co., Ltd., Jiangsu Xinmeixing Packaging Machinery Co., Ltd., Hangzhou Wahaha Group Co., Ltd., Sidel Machinery (Shanghai)
Co., Ltd., Krones Machinery (Taicang) Co., Ltd., Hefei General Electromechanical Product Testing Institute Co., Ltd., Zhejiang University, Shanghai Zijiang Enterprise Collection
Group Co., Ltd. and Zhuhai Zhongfu Industrial Co., Ltd.
Participated in the drafting of this standard. Coca-Cola Beverage (Shanghai) Co., Ltd., Guangdong Swire Coca-Cola Co., Ltd., Shanghai Want Want Food
Group Co., Ltd., China Food Fermentation Industry Research Institute Co., Ltd., South China University of Technology, Coca-Cola Bottler Management Service (Shanghai)
Limited company, Nanjing Food Packaging Machinery Research Institute, Hefei Zhongchen Light Industry Machinery Co., Ltd., COFCO Coca-Cola Beverage (China) Investment Co., Ltd.
Division, China Resources Yibao Beverage (China) Co., Ltd., Nongfu Mountain Spring Co., Ltd., Xiamen Yinlu Food Group Co., Ltd., Guangzhou Wanglaojida
Health Industry Co., Ltd., Qingyuan Jiaduobao Herb Technology Co., Ltd., Shenzhen Jingtian Food & Beverage Co., Ltd., Danone (China) Food
Beverage Co., Ltd. Guangzhou Branch.
The main drafters of this standard. Jiang Xiaoping, Zhang Songming, Shi Zheng, He Deping, Shao Jinrong, Luo Xinxi, Wang Bijiang, Chen Runjie, Liu Donghong, Wang Zhenhui,
Kong Deshan, Xie Guoji, Dong Shusheng, Wu Zhigang, Ruan Chunhui, Liang Yanjun, Wu Yun, Ji Rong, Lu Jia, Dizhuqing.
Drafters participating in this standard. Ye Hui, Ou Jianwei, Yu Mingda, Cai Linchang, Tang Weiqiang, Hu Qingchun, Yang Shengjun, Ju Ronghua, Lin Commander, Tao Yong,
Lu Jing, Weng Xianbin, Yang Ning, Li Cizhou, Qi Zhenkuan, Hao Linian, Jin Guoxing.
Blow molding machine for PET bottles for food packaging
1 Scope
This standard specifies the terms, definitions, models and types of polyethylene terephthalate (PET) bottle blow molding molds for food packaging
Type, basic parameters and working conditions, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard is applicable to blow molding molds (hereinafter referred to as "molds") for PET bottles for food (beverages, alcohol, condiments, etc.) packaging. day
Chemical, pharmaceutical and other industries can refer to use.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 3 common thread finishing, shoulder distance, undercut and chamfer
GB/T 191 Graphic mark for packaging, storage and transportation
GB/T 196 basic dimensions of ordinary thread
GB/T 197 General thread tolerance
GB/T 1184-1996 Tolerances for shape and position tolerances are not noted
GB/T 1804-2000 General tolerance Tolerance of linear and angular dimensions without tolerance
GB/T 2828.1 Counting sampling inspection procedures Part 1. Sampling plan for batch-by-batch inspection retrieved by acceptance quality limit (AQL)
GB/T 5226.1 Mechanical electrical safety Mechanical electrical equipment Part 1. General technical conditions
GB/T 6403.4 Rounding and chamfering of parts
GB/T 7311 Packaging machinery classification and model compilation method
GB/T 9969 General Instructions for Use of Industrial Products
GB/T 13277.1-2008 Compressed air Part 1. Pollutant purification grade
GB/T 13384 General technical requirements for packaging of electromechanical products
GB/T 14253 General technical requirements for light industry machinery
GB 16798 Food Machinery Safety and Sanitation
GB/T 17931 Polyethylene terephthalate (PET) resin for bottles
GB/T 19891 Machinery Safety Hygienic requirements for machine design
QB/T 2357 Polyester (PET) sparkling beverage bottle
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Mold cavity mouldcavity
Mold parts for forming PET bottle body.
3.2
Base mould
Mold parts for forming the bottom of PET bottles.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38461-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 38461-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 38461-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38461-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|