HOME   Cart(2)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 37358-2019 English PDF

US$519.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37358-2019: Friction pendulum isolation bearings for buildings
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 37358-2019English519 Add to Cart 5 days [Need to translate] Friction pendulum isolation bearings for buildings Valid GB/T 37358-2019

PDF similar to GB/T 37358-2019


Standard similar to GB/T 37358-2019

GB/T 17742   DB/T 60   GB 50191   GB 17741   GB 55021   

Basic data

Standard ID GB/T 37358-2019 (GB/T37358-2019)
Description (Translated English) Friction pendulum isolation bearings for buildings
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard P15
Classification of International Standard 91.120.25
Word Count Estimation 26,242
Date of Issue 2019-03-25
Date of Implementation 2020-02-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 37358-2019: Friction pendulum isolation bearings for buildings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Friction pendulum isolation bearings for buildings ICS 91.120.25 P15 National Standards of People's Republic of China Building friction pendulum isolation bearing Published on.2019-03-25 2020-02-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Classification, specifications, markings 3 5 General requirements 4 6 requirement 6 7 Test method 9 8 Inspection rules 10 9 Marking, packaging, transport and storage 12 Appendix A (informative) Technical parameters of bearing isolation performance 13 Appendix B (normative appendix) Friction material wire wear test method 16 Appendix C (Normative) Test Method for Creep Compression Deformation of Friction Materials 18 Appendix D (normative appendix) Vertical bearing capacity test method 20 Appendix E (Normative Appendix) Test Method for Horizontal Performance of Finished Bearings 22

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. This standard is drafted by. China Building Standard Design and Research Institute Co., Ltd. Participated in the drafting of this standard. Guangzhou University, Huazhong University of Science and Technology, Petroleum and Chemical Industry Rubber and Chemical Quality Supervision and Inspection Center (Beijing), Beijing University of Technology, Beijing University of Architecture, Nanjing University of Technology, Institute of Engineering Mechanics, China Earthquake Administration, North China University of Technology, Wuhan Hairun Engineering Equipment Co., Ltd., Heng Rubber Technology Co., Ltd., Shandong Longxiang New Material Technology Co., Ltd., Hebei Baoli Engineering Equipment Co., Ltd. Co., Ltd., Shenzhou Engineering Plastics Co., Ltd., Chengdu Xinzhu Road and Bridge Machinery Co., Ltd., Fengze Intelligent Equipment Co., Ltd. the company. The main drafters of this standard. Deng Yu, Yu Yinquan, Jiang Hangjun, Tan Ping, Xiong Shishu, Zhao Chunbo, Peng Lingyun, Zeng Demin, Wang Shuguang, Wang Tao, Song Xiaosheng, Lei Yuande, Wang Kuan, Liang Xu, Tian Jiande, Han Qingguo, Wang Xihui, Wu Zenghui, Huang Fei, Xu Ruixiang. Building friction pendulum isolation bearing

1 Scope

This standard specifies the terms and definitions of building friction pendulum isolation bearings, classification, specifications, marking, general requirements, requirements, test methods, inspection Inspection rules, marking, packaging, transportation and storage. This standard applies to the friction pendulum isolation bearings used in the construction and structure of structures.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber GB/T 699 high quality carbon structural steel GB/T 700 carbon structural steel GB/T 819.2 Cross recessed countersunk screws - Part 2. 8.8, stainless steel and non-ferrous metal screws Plastics -- Determination of density of non-foam plastics -- Part 1 . Dipping method, liquid pycnometer method and titration method Determination of tensile properties of plastics - Part 3. Test conditions for films and sheets GB/T 1184 Shape and position tolerances without tolerance values GB/T 1591 low alloy high strength structural steel GB/T 1682 vulcanized rubber - Determination of low temperature brittleness - Single sample method GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances GB/T 3077 alloy structural steel GB/T 3280 stainless steel cold rolled steel plate and strip GB/T 3398.1 Determination of hardness of plastics - Part 1 GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat test GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10IRHD~100IRHD) GB/T 7233.1 Ultrasonic testing of steel castings - Part 1. General purpose steel castings GB/T 7760 vulcanized rubber or thermoplastic rubber - Determination of bond strength Static tensile test of GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking GB/T 11352 casting carbon steel for general engineering GB/T 11379 metal coating for chrome plating GB/T 20688.1 Isolation bearings - Part 1. Test methods for isolated rubber bearings JB/T 5943 General technical conditions for welding parts of construction machinery Technical requirements for TB/T 1527 railway steel bridge protection coating and coating supply

3 Terms and definitions

The following terms and definitions apply to this document.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37358-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37358-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37358-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37358-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.