HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 37219-2023 English PDF

US$609.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 37219-2023: Safety specification of inflatable play equipment
Status: Valid

GB 37219: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB 37219-2023	English	609	Add to Cart	5 days [Need to translate]	Safety specification of inflatable play equipment	Valid	GB 37219-2023
GB/T 37219-2018	English	1359	Add to Cart	5 days [Need to translate]	Safety requirements of inflatable play equipment	Obsolete	GB/T 37219-2018

PDF similar to GB 37219-2023

Standard similar to GB 37219-2023

GB/T 37647 GB/T 36668.2 GB/T 36668.1 GB/T 45277 GB/T 45275

Basic data

Standard ID	GB 37219-2023 (GB37219-2023)
Description (Translated English)	Safety specification of inflatable play equipment
Sector / Industry	National Standard
Classification of Chinese Standard	Y57
Classification of International Standard	97.200.40
Word Count Estimation	30,353
Date of Issue	2023-12-28
Date of Implementation	2024-07-01
Older Standard (superseded by this standard)	GB/T 37219-2018
Issuing agency(ies)	State Administration for Market Regulation, China National Standardization Administration

GB 37219-2023: Safety specification of inflatable play equipment

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 97:200:40 CCSY57 National Standards of People's Republic of China Replace GB/T 37219-2018 Safety regulations for inflatable amusement equipment Published on 2023-12-28 2024-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General requirements 3 5 Safety requirements 3 5:1 Fixed 3 5:2 Structural integrity 3 5:3 Protrusion 4 5:4 Access points and open edges 4 5:5 Fence 6 5:6 Inflatable slide 7 5:7 Pinch protection 8 5:8 Electrical installation 9 5:9 Inflatable blower 9 5:10 Special requirements for wading inflatable amusement equipment10 5:11 Special requirements for non-sustainable inflatable amusement rides10 5:12 Site requirements10 5:13 Packaging and storage11 5:14 Number of players 12 5:15 Emergency handling12 5:16 Safety signs 12 5:17 Design life and scrap12 6 Material requirements13 6:1 Flexible fabrics13 6:2 Suture 13 6:3 Networking 13 6:4 Rope 13 6:5 Zipper 14 7 Inspection, testing and testing14 7:1 Inspection of basic parameters, important linear and angular dimensions 14 7:2 Inspection, testing and test methods 14 8 Random files 19 8:1 Inflatable amusement equipment nameplate19 8:2 Inflatable fan nameplate 20 8:3 Product Operation and Maintenance Instructions 20 9 Usage management 20 Appendix A (informative) Calculation method for the number of fixed points 22 Appendix B (Normative) Touchdown Test Method 23

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 37219-2018 "Safety Specifications for Inflatable Amusement Facilities": Compared with GB/T 37219-2018, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows: a) Changed the scope of application (see Chapter 1, Chapter 1 of the:2018 edition); b) Changes in terms and definitions (see Chapter 3, Chapter 3 of the:2018 edition); c) Fixed safety requirements changed (see 5:1, 4:2 of the:2018 version); d) Added safety requirements for inflatable slides (see 5:6); e) Changed the content of pinch protection (see 5:7, 4:7 of the:2018 version); f) Added special requirements for wading inflatable amusement facilities and non-sustainable inflatable amusement facilities (see 5:10 and 5:11); g) The hazardous substance limits of materials have been changed (see 6:1:3, 5:1:3 of the:2018 version); h) Delete the inspection and test of pinch protection, fence height test, ground contact test, anchor point tensile test, load test, flexible fabric Test methods such as strength test and flame retardancy test of materials (see Chapter 6 of the:2018 edition); i) Added inspection, testing and testing methods (see 7:2); j) The content of usage management has been changed (see Chapter 9, Chapter 8 of the:2018 edition); k) The content of the touchdown test method has been changed (see Appendix B, Appendix B of the:2018 version); l) The extrusion test method has been deleted (see Appendix C of the:2018 version): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed and managed by the State Administration for Market Regulation: The previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 37219-2018 in:2018; ---This is the first revision: Safety regulations for inflatable amusement equipment

1 Scope

This document stipulates the overall requirements, safety requirements, material requirements, random documents and usage management requirements for inflatable amusement facilities, and describes Inspection, testing and test methods: This document applies to inflatable amusement equipment for children aged 3 to 14 years old and used on land: This document does not apply to inflatable toys, inflatable buildings, rubber boats, inflatable swimming pools and those used for advertising, exhibitions, acrobatic performances, safety, rescue Inflatable facilities for aid, aviation and aerospace purposes:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 529 Determination of tear strength of vulcanized rubber or thermoplastic rubber (trouser-shaped, right-angled and crescent-shaped specimens) GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances noted GB/T 2408 Horizontal and vertical methods for determination of combustion properties of plastics GB 2894 Safety signs and guidelines for their use GB 3096 Acoustic environment quality standard GB/T 3805 Extra low voltage (ELV) limits GB/T 4208 Shell protection level (IP code) GB 4706:1 Safety of household and similar electrical appliances Part 1: General requirements GB 6675:3 Toy Safety Part 3: Flammability GB 6675:4 Toy Safety Part 4: Migration of Specific Elements GB 8408 Safety Specifications for Large Amusement Facilities GB/T 20050-2020 General requirements for inspection and testing of large-scale amusement facilities GB/T 21328 General requirements for fiber ropes GB/T 22048 Determination of specific phthalate plasticizers in toys and children's products GB 24613-2009 Limits of harmful substances in coatings for toys GB/T 28622 Terminology for unpowered amusement equipment GB/T 34272-2017 Safety Specifications for Small Amusement Facilities CJ/T 244 swimming pool water quality standards HG/T 2580 Determination of tensile strength and elongation at break of rubber or plastic coated fabrics HG/T 3052 Determination of adhesive strength of coating layer of rubber or plastic coated fabrics SN/T 1877:2 Determination method of polycyclic aromatic hydrocarbons in plastic raw materials and their products SN/T 1877:4 Determination method of polycyclic aromatic hydrocarbons in rubber and its products

3 Terms and definitions

The terms and definitions defined in GB/T 28622 and the following apply to this document:

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 37219-2023_English be delivered?

Answer: Upon your order, we will start to translate GB 37219-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 37219-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB 37219-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 37219-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 37219-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.