|
US$344.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37180-2018: Gas analysis -- Handling of calibration gases and gas mixtures -- Guidelines
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37180-2018 | English | 344 |
Add to Cart
|
3 days [Need to translate]
|
Gas analysis -- Handling of calibration gases and gas mixtures -- Guidelines
| Valid |
GB/T 37180-2018
|
PDF similar to GB/T 37180-2018
Basic data | Standard ID | GB/T 37180-2018 (GB/T37180-2018) | | Description (Translated English) | Gas analysis -- Handling of calibration gases and gas mixtures -- Guidelines | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G86 | | Classification of International Standard | 71.100.20 | | Word Count Estimation | 18,178 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37180-2018: Gas analysis -- Handling of calibration gases and gas mixtures -- Guidelines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gas analysis--Handling of calibration gases and gas mixtures--Guidelines
ICS 71.100.20
G86
National Standards of People's Republic of China
Gas analysis calibration with pure gas and mixed gas
user's guidance
(ISO 16664.2017, IDT)
Published on.2018-12-28
2019-11-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method equivalent to ISO 16664.2017 "Guidelines for the use of pure gas and mixed gases for gas analysis and calibration".
This standard was proposed by the China Petroleum and Chemical Industry Federation.
This standard is under the jurisdiction of the National Gas Standardization Technical Committee (SAC/TC206).
This standard was drafted. Southwest Chemical Research and Design Institute Co., Ltd., Dalian Date Gas Co., Ltd., Tianjin Lianbo Chemical Co., Ltd.
Company, Shaanxi Environmental Monitoring Center Station, Guangdong Huate Gas Co., Ltd., Shanghai Huaai Chromatography Analysis Technology Co., Ltd.
The main drafters of this standard. Chen Yali, Zhao Shuide, Qu Qing, Li Fufen, Xue Ding, Ren Hongping, Liao Hengyi, Chen Yanshan, Fang Hua.
Gas analysis calibration with pure gas and mixed gas
user's guidance
Safety Precautions---In addition to this standard, countries and international safety related to the storage, use and transportation of pure gas and mixed gas should also be followed.
Full regulation.
1 Scope
This standard describes factors that may affect the composition of a pure gas or a homogeneous mixture of gases for calibration. This standard only applies to pure gas during the validity period.
Or a mixture of gases. It provides guidance on the handling and use of calibration gases from the following aspects.
--- Calibration gas cylinder storage;
--- Extract the calibration gas from the cylinder;
--- Transfer calibration gas from the cylinder to the calibration point.
This standard also outlines methods for assessing the stability of calibration gases, taking into account the uncertainty of the gas composition given by the certificate and
The measurement uncertainty of the household.
2 Normative references
There are no normative documents in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
ISO and IEC give the terminology database used in standardization at the following URL.
3.1
Calibration gas calibrationgas
Pure gas or mixed gas for calibration.
3.2
Calibrate the mixed gas calibrationgasmixture
A mixed gas with known stability (3.9) and uniformity (3.4) whose composition has been quasi-determined for calibration or inspection of the measuring instrument
Verification and verification of measurements.
Note. The calibration mixture is a measurement standard (Appendix A) as defined in ISO /IEC Guide 99.2007.
[ISO 7504..2015, 5.1]
3.3
Component component
The chemical composition of a substance or mixture in a defined physical state.
[ISO 7504..2015, 3.3]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37180-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 37180-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37180-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37180-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|