|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36805.1-2018: Plastics -- Determination of tensile properties at high strain rates -- Part 1: Equation fitting method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36805.1-2018 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Plastics -- Determination of tensile properties at high strain rates -- Part 1: Equation fitting method
| Valid |
GB/T 36805.1-2018
|
PDF similar to GB/T 36805.1-2018
Basic data | Standard ID | GB/T 36805.1-2018 (GB/T36805.1-2018) | | Description (Translated English) | Plastics -- Determination of tensile properties at high strain rates -- Part 1: Equation fitting method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G31 | | Classification of International Standard | 83.080.20 | | Word Count Estimation | 14,189 | | Date of Issue | 2018-09-17 | | Date of Implementation | 2019-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36805.1-2018: Plastics -- Determination of tensile properties at high strain rates -- Part 1: Equation fitting method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics - Determination of tensile properties at high strain rates - Part 1. Equation fitting method
ICS 83.080.20
G31
National Standards of People's Republic of China
Determination of tensile properties of plastics at high strain rates
Part 1. Equation fitting method
Part 1.Equationfittingmethod
(ISO 18872.2007, Plastics-Determinationoftensile
Propertiesathighstrainrates, IDT)
Published on.2018-09-17
Implementation of.2019-04-01
State market supervision and administration
China National Standardization Administration issued
Foreword
GB/T 36805 "Determination of tensile properties of plastics at high strain rate" is divided into two parts.
--- Part 1. Equation fitting method;
--- Part 2. Direct test method.
This part is the first part of GB/T 36805.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the translation method equivalent to ISO 18872.2007 "Determination of tensile properties at high strain rates of plastics".
The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.
Plastics -- Determination of tensile properties of plastics -- Part 2 . Test conditions for moulding and extruded plastics
(ISO 527-2.1993, IDT).
This section has made the following editorial changes.
--- Modified the standard name.
This part was proposed by the China Petroleum and Chemical Industry Federation.
This part is under the jurisdiction of the National Plastics Standardization Technical Committee General Method and Product Subcommittee (SAC/TC15/SC4).
This section was drafted by. Blonde Technology Co., Ltd., Zhonglan Chenguang Chemical Co., Ltd., China Petroleum & Chemical Corporation North
Beijing Chemical Industry Research Institute, Shanghai Blonde Technology Development Co., Ltd., Shanghai Yanfeng Jinqiao Automotive Trim Systems Co., Ltd., Pan Asia Automotive Technology Center
Co., Ltd., Zhonglan Chenguang Chengdu Testing Technology Co., Ltd., National Plastic Products Quality Supervision and Inspection Center (Fuzhou).
The main drafters of this section. Huang Xianbo, Wu Bo, Zhu Tiange, Ye Nanwei, Song Cuicui, Liu Lirong, Liang Kezhen, Yuan Shaoyan, Dongmei,
Pang Chenghuan, Zhou Junlong, Jiang Li, Tian Bao, Zheng Wen, Huang Zhengan.
Introduction
Tensile performance data of plastic materials at different strain rates can be used for CAE deformation and failure behavior of plastic products and plastic parts
Simulation analysis. Plastic materials are sensitive to the rate of change, and performance at high strain rates and performance at low strain rates are usually presented.
Different laws.
In order to regulate the tensile properties of plastic materials at high strain rates, this standard is specifically formulated. This standard is for sample types, test equipment and
The test methods all set clear requirements.
Determination of tensile properties of plastics at high strain rates
Part 1. Equation fitting method
1 Scope
This part of GB/T 36805 specifies the method for determining the tensile properties of molded and extruded plastics over a wide range of strain rates.
The variable rate range includes a rate that approximates the high strain rate in the case of impact loading. Performance determination by combining the following methods. in test
Performance at low strain rates, using mathematical functions to fit the test results, extrapolating the equations to derive rate-dependent parameters. Then pass
Extrapolation over the calculation yields tensile properties at high strain rates. This method can eliminate the test problem of performance measurement at high strain rate.
And related errors in measurement. Performance at low to medium strain rates is determined in accordance with ISO 527-2 and is specified for use in this section.
Type of plastic material.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Plastics -- Determination of tensile properties - Part 1. General (ISO 527-1.1993, IDT)
Plastics -- Determination of tensile properties of plastics -- Part 2 . Test conditions for molded and extruded plastics (Plastics-Determi-
nationoftensileproperties-Part 2.Testconditionformouldingandextrusionplastics)
Machined preparation of ISO 2818 plastic specimens (Plastics-Preparation of testspecimensbymachining)
3 Principle
The tensile stress-strain curve was obtained according to ISO 527-2 at a selected rate in the range of 0.1 mm/s to 100 mm/s.
In order to obtain the highest accuracy test results at higher rates, the design features of the test setup described in Chapter 5 should be noted. At the same time, measuring Poisson
The ratio varies with strain. Based on these results, the true stress and the true plastic strain value at each strain rate can be calculated. Mathematical letter
The numerical equation can accurately simulate each stress/plastic strain curve. At the same time, it is also possible to model and analyze the parameters in this function with the strain rate.
The change is extrapolated to give a parameter value at a higher strain rate. A stress/strain curve at a higher strain rate can be obtained by calculation.
4 Terms and definitions
The following terms and definitions as defined in GB/T 1040.1-2006 apply to this document.
4.1
True stress truestress
σT
At the same time, the ratio of the measured force to the cross-sectional area between the gauge lengths of the specimen.
4.2
True strain truestrain
εT
At the same time, the ratio of the elongation between the gauge lengths to the length of the gauge length.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36805.1-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36805.1-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36805.1-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36805.1-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|