|
US$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36462-2018: General requirements for component-oriented virtual prototype software development
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36462-2018 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
General requirements for component-oriented virtual prototype software development
| Valid |
GB/T 36462-2018
|
PDF similar to GB/T 36462-2018
Basic data | Standard ID | GB/T 36462-2018 (GB/T36462-2018) | | Description (Translated English) | General requirements for component-oriented virtual prototype software development | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L77 | | Classification of International Standard | 35.080 | | Word Count Estimation | 22,227 | | Date of Issue | 2018-06-07 | | Date of Implementation | 2019-01-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36462-2018: General requirements for component-oriented virtual prototype software development
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements for component-oriented virtual prototype software development
ICS 35.080
L77
National Standards of People's Republic of China
General Requirements for Component-Oriented Virtual Prototyping Software Development
Development
Published on.2018-06-07
2019-01-01 Implementation
National Market Supervision Administration
China National Standardization Administration released
Directory
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions, Abbreviations 1
3.1 Terms and Definitions 1
3.2 Abbreviations 2
4 General Requirements for Virtual Prototyping Software Overview 2
5 Virtual Prototyping Software Development Environment Requirements 2
6 Virtual Prototyping Software Development Process Requirements 2
7 Virtual Prototyping Software Documentation Requirements 3
8 Atomic Model Port Description Requirements 3
8.1 General requirements 3
8.2 Atomic Model Port Description Requirements 4
8.3 Atomic Model Variable Description Requirements 4
9 Atomic Model Functional Requirements 4
10 Atomic Model Integration Interface Requirements 5
10.1 Overview 5
10.2 COM Form Atom Model Interface 5
10.3 Normal DLL Form Atom Model Interface 5
11 Form of Product Form 6
11.1 Virtual Prototyping Software Product Form 6
11.2 Software Library Product Form 6
Appendix A (Informative) Atom Model Function Function Programming Reference 7
Appendix B (Normative Appendix) Atom Model Integration Interface Requirements 11
Appendix C (Normative) Atomic Model Port Service Description XML Schema 14
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents.
This standard was proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).
This standard was drafted by. China Aerospace Science and Industry Corporation Second Institute Second Overall Design Department, Beijing University of Aeronautics and Astronautics, China Electronics Technology
Institute of Standardization, Beijing Aerospace Science and Technology Development Co., Ltd.
The main drafters of this standard. Tao Yi, Zhou Junhua, Li Yu, Song Xiao, Zhang Yi, Shi Guoqiang, Hou Baocun, Wang Mei.
General Requirements for Component-Oriented Virtual Prototyping Software Development
1 Scope
This standard specifies the general requirements for the development of virtual prototype software for components in the field of simulation, including environmental requirements and process requirements.
And documentation requirements. At the same time corresponds to the general simulation technology, but also on the port description requirements and functional implementation requirements for atomic component development.
The integrated interface requirements and the form of the product are fully described.
This standard applies to the development of complex product virtual prototype software.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 8566-2007 information technology software life cycle process
GB/T 8567-2006 Computer Software Documentation Specification
GB/T 11457-2006 Information Technology Software Engineering Terms
3 Terms and Definitions, Abbreviations
3.1 Terms and Definitions
The definitions of GB/T 8566-2007 and GB/T 11457-2006 and the following terms and definitions apply to this document.
3.1.1
Virtual Prototype virtualprototype
A set of computer numerical models that correspond to physical products.
Note. The virtual prototype defines, simulates, tests and evaluates physical products from the aspects of construction, function and performance, and is used as a physical product in the development, production and
The main basis for the use of activities during the life cycle.
3.1.2
Virtual Prototype System virtualprototypesystem
Taking Virtual Prototype as the Main Body, Further Integrating the Digital Simulation of Multi-disciplinary Models of Real-world System Application Environment, Target Objects, etc.
system.
3.1.3
Component component
The concept of logic composition in the field of simulation is the software implementation of various granularity and discipline models in the virtual prototyping system. further,
Components correspond to the model of the simulation domain, and atomic components (ie, the most fine-grained components) correspond to atomic models.
Note. Components only include well-defined interfaces and external environmental dependencies, independent releases and can be integrated by third parties.
3.1.4
Component Object Model componentobjectmodel;COM
A common model for component-oriented development under the Windows operating system.
Note. The Component Object Model can provide services to applications, operating systems, and other components.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36462-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36462-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36462-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36462-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|