|
US$439.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35716-2017: Overload protectors for hermetic motor-compressors
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35716-2017 | English | 439 |
Add to Cart
|
5 days [Need to translate]
|
Overload protectors for hermetic motor-compressors
| Valid |
GB/T 35716-2017
|
PDF similar to GB/T 35716-2017
Basic data | Standard ID | GB/T 35716-2017 (GB/T35716-2017) | | Description (Translated English) | Overload protectors for hermetic motor-compressors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K32 | | Classification of International Standard | 97.120 | | Word Count Estimation | 22,219 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35716-2017: Overload protectors for hermetic motor-compressors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Overload protectors for hermetic motor-compressors
ICS 97.120
K32
National Standards of People's Republic of China
Fully enclosed motor - compressor with thermal protector
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 product type, name and basic parameters and size 2
5 technical requirements 5
6 test methods 8
7 Inspection rules 12
8 logo, packaging, transportation and storage 14
Figure 1 protector infrastructure Figure 15
Figure 2 plugging force measurement guide posts and guide dimensions 16
Figure 3 external protection electrical life test wiring diagram 17
Figure 4 built-in single-item protection of electrical life test wiring diagram 17
Figure 5 built-in three-way electrical life test wiring diagram 18
Table 1 operating temperature code 3
Table 2 external protector basic parameters 4
Table 3 built-in protector basic parameters 4
Table 4 external protection minimum operating current and current 9
Table 5 factory inspection items Table 12
Table 6 Type test items Table 14
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the China Electrical Equipment Industry Association.
This standard by the National Automatic Control Standardization Technical Committee (SAC/TC212) centralized.
This standard by the China Electric Apparatus Research Institute Co., Ltd., Hangzhou Star Fergus Electric Co., Ltd., Changshu Tianyin Electromechanical Co., Ltd.
Company, Ningbo Shengfang Miramar Electric Co., Ltd., Guangzhou Senbao Electric Co., Ltd., Foshan Tongbao Huaxing Controller Co., Ltd., Lanxi
City, the stronger Electric Co., Changzhou Changrong Electric Co., Ltd., Shunde Ronggui measuring Electric Co., Ltd., Guangdong Meizhi refrigeration equipment
Co., Ltd., Guangzhou Wanbao Compressor Co., Ltd., Gasbera Compressor Co., Ltd., Panasonic · Wanbao (Guangzhou) Co., Ltd. Compressor
Division, Zhuhai Lingda Compressor Co., Ltd., Sensata Technology (Changzhou) Co., Ltd., Xiamen, Extension Electric Technology Co., Ltd., Xi'an Asahi Mai Smart
Appliance Technology Co., Ltd. is responsible for drafting.
This standard by the heart, such as Anhui Electrical Appliance Co., Ltd., Wuhu Kowloon Controller Co., Ltd., Anhui excellence Electric Equipment Co., Ltd.,
Hefei Midea Refrigerators Co., Ltd., Guangdong CEC Industrial and Household Appliances Productivity Promotion Center Co., Ltd., Zanussi Electric Machinery
(Tianjin) Compressor Co., Ltd., Ningbo Ou Zhi Electric Technology Co., Ltd., Dongguan City Zhiheng Household Appliances Technology Co., Ltd., Wenzhou Hongfeng Power
Alloy Co., Ltd., Zhejiang Zhongyan Thermostat Co., Ltd., Xiamen Xiaoxun New Energy Technology Co., Ltd., You Laid Electric Co., Ltd.,
Rising Power Technology Co., Ltd., Zhangzhou Albemarle Electronics Co., Ltd., Xi'an Expedition Intelligent Software Co., Ltd., Jia Bo Electric Co., Ltd., Xiamen
Industry Sheng Electric Co., Ltd. participated in the drafting.
The main drafters of this standard Kong Ruixun, Lu Wencheng, Zhao Yunwen, Wu Yi group, Zhou Yiwu, Chen Guangyu, Wang Jian, Kuang Xifang, Liang Zhicheng,
Zhao Dongliang, Chen Zhonghua, Liu Huijun, Nie Hongyan, Xie Limong, Chen Jian, Ni Yong, Chen Feng, Chen Yang, Wang Zhensi, Zhuzhou Yang, Zhao Jianping, Yu Qing,
Qian Feng, Liu Qingli, Ke Cailong, Lu Mingguo, Chen Xiao, Chen Yonglong, Chen Peihua, Zhu Fengyong, Jin Fuyan, Shi Mingmu, Southern Zheng, Ran Jun, Ye Qinci and so on.
Introduction
This standard mainly reflects the requirements of all closed-motor-compressor thermal protector performance-related technical indicators, and fully enclosed motor-pressure
Safety requirements of the compressor thermal protector can be found in GB/T 14536.5 "Automatic and domestic electrical and mechanical seal and semi-seal
Motor - Compressor Motor Thermal Protector Special Requirements. " It is recommended that the two standards be used in combination to evaluate a fully enclosed motor -
Compressor thermal protector.
Fully enclosed motor - compressor with thermal protector
1 Scope
This standard specifies the fully enclosed refrigeration motor - compressor thermal protector (hereinafter referred to as "protector") product type, name and basic
Parameters and dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the installation of household and similar refrigeration equipment with a fully enclosed refrigeration motor - the surface of the compressor housing or internal
protector.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.3 Environmental testing Part 2. Test methods Test Cab. Constant hot and humid test
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2423.22 Environmental testing Part 2. Test methods Test N. Temperature changes
GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 14536.1-2008 Household and similar electrical automatic control Part 1 - General requirements
GB/T 14536.5 Household and similar electrical automatic control seal and semi-seal Motor-compressor motor thermal protector
Special requirements
GB/T 22685 Household and similar controller packaging and labeling
UL758 Electrical wiring wire and cable and test methods (StandardforApplianceWiringMaterial)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Protector overloadprotector
Installed inside or outside the motor compressor, to prevent the motor - compressor due to over-current and/or over-temperature of the automatic controller.
3.2
External protector externaloverloadprotector
Installed in fully enclosed refrigeration motor - the compressor housing surface protection.
3.3
Built-in protector internaloverloadprotector
Installed in the fully enclosed refrigeration motor - compressor housing inside the protector.
3.4
Action temperature triptemperature
Protector does not carry current or carrying signal current circumstances, the static and dynamic contact separation temperature.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35716-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 35716-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35716-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35716-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|