GB/T 35595: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35595-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Glass containers - Testing methods for arsenic and antimony release
| Valid |
GB/T 35595-2025
|
| GB/T 35595-2017 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Glass containers -- Testing methods for arsenic and antimony release
| Valid |
GB/T 35595-2017
|
Basic data | Standard ID | GB/T 35595-2025 (GB/T35595-2025) | | Description (Translated English) | Glass containers - Testing methods for arsenic and antimony release | | Sector / Industry | National Standard (Recommended) | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 35595-2017 | GB/T 35595-2017: Glass containers -- Testing methods for arsenic and antimony release---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Glass containers-Testing methods for arsenic and antimony release
ICS 81.040.01
N64
National Standards of People's Republic of China
Determination of arsenic and antimony in glass containers
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the China Light Industry Federation.
This standard by the National Glass Instrument Standardization Technical Committee (SAC/TC178) centralized.
This standard was drafted unit. National Light Industry Glass Product Quality Supervision and Testing Center.
The main drafters of this standard. Yuan Chunmei, Ding Cuixia, Liang Ye, Bao Jian.
Determination of arsenic and antimony in glass containers
1 Scope
This standard specifies the determination of arsenic and antimony in glass containers.
This standard applies to dress up food, medicine, wine, drinking water and other types of glass containers.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 analytical laboratory water specifications and test methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Packing glass containers packingglassholowware
For containing food, medicine, wine, drinking water and other glass or glass container.
3.2
Flat container flatware
Glass containers with a depth of less than 25 mm from the innermost flat to the lip of the rim.
3.3
Small container smalholowware
Container less than 600mL.
3.4
Large container largeholowware
600mL ~ 3000mL container.
3.5
Storage tank storageholowware
Container larger than 3L.
3.6
Pyrex container resistanceheatingglassholowware
Containers heated food containers, such as microwave oven pan, coffee pot, hot pot and other glass containers.
3.7
Interpolation bracketingtechnique
An analytical method, that is, take two close up and down next to the standard solution and the measured atomic extract simultaneous determination of each 1
Absorbance of the solution or instrument readings and calculations.
3.8
Standard curve method calibrationfunction
A method of analysis. The absorbance of a standard series of solutions is determined on a spectrophotometer and the concentration standard curve is plotted. In the same instrument
|