HOME Cart(6) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 35480-2017 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35480-2017: Fastener -- Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 35480-2017	English	279	Add to Cart	3 days [Need to translate]	Fastener -- Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification	Valid	GB/T 35480-2017

PDF similar to GB/T 35480-2017

Standard similar to GB/T 35480-2017

GB/T 33943 GB/T 35481 GB/Z 32564 GB/T 35478

Basic data

Standard ID	GB/T 35480-2017 (GB/T35480-2017)
Description (Translated English)	Fastener -- Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J13
Classification of International Standard	21.060.10
Word Count Estimation	14,120
Date of Issue	2017-12-29
Date of Implementation	2018-07-01
Regulation (derived from)	National Standards Bulletin 2017 No. 32
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35480-2017: Fastener -- Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fastener - Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification ICS 21.060.10 J13 National Standards of People's Republic of China Fasteners Bolts, screws, and studs are pre-coated with a microcapsule Adhesive layer technical conditions Fastener-Steelbolts, screwsandstudswithmicroencapsulatedadhesive 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Machinery Industry Federation. This standard by the National Standardization Technical Committee fasteners (SAC/TC85) centralized. This standard is drafted by. Machine Productivity Promotion Center. Participated in the drafting of this standard. Henkel Co., Ltd., Chongqing Changan Automobile Co., Ltd., Guangzhou Automobile Group Co., Ltd. Automotive Engineering Research Institute, Hubei Huitian New Materials Co., Ltd., screw down (Kunshan) Co., Ltd., Zhejiang State Inspection and Testing Technology shares Co., Ltd., Machinery Industry General Parts Product Quality Supervision and Testing Center. This standard by the National Standardization Technical Committee fasteners responsible for the interpretation. Fasteners Bolts, screws, and studs are pre-coated with a microcapsule Adhesive layer technical conditions

1 Scope

This standard specifies the pre-coated microcapsule adhesive layer on the bolts, screws and studs (hereinafter referred to as external thread fasteners) (hereinafter referred to as adhesive Layer) terminology, pre-coating size, performance requirements and test methods. This standard applies to threads in line with GB/T 193, thread specifications for the M3 ~ M39, coarse thread and thread nominal diameter d = 8mm ~ 39mm, fine thread. This standard applies to comply with the provisions of GB/T 3098.1 made of carbon steel or alloy steel threaded fasteners, as well as in line with GB/T 3098.6 Specified male threaded fasteners made of stainless steel. Phillips screws below 8.8, hexagonal fancy pan head screws, and lower load Ability to use the screw reference. For lubricated surfaces, Appendix A gives references to system performance tests at high temperatures. Appendix B shows the pre-coating and application Reference temperature range of use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 97.1 flat washers A level GB/T 1237 Fastener marking method GB/T 5277 fastener bolts and screw through holes GB/T 5783 hex bolts full thread GB/T 6170 Type 1 hex nuts GB/T 16823.3 Fastener torque - clamping force test

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Microencapsulated adhesive layer microencapsulatedadhesivecoating The microencapsulated initiator or curing agent is mixed with the adhesive and applied to the male thread fastener threads; when the male thread fastener is tightened, Pre-curing adhesive and external thread fasteners to produce part of the engagement, improve the external thread fasteners performance. 3.2 Screw in torque-in torque Tin Torque measured when male threaded fastener is screwed into nut specimen. 3.3 Tightening torque tighteningtorque TA Torque applied to the nut or male fastener head when tightened.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35480-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35480-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35480-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35480-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.