|
US$519.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35203-2017: Space product general test documentation
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35203-2017 | English | 519 |
Add to Cart
|
6 days [Need to translate]
|
Space product general test documentation
| Valid |
GB/T 35203-2017
|
PDF similar to GB/T 35203-2017
Basic data | Standard ID | GB/T 35203-2017 (GB/T35203-2017) | | Description (Translated English) | Space product general test documentation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V01 | | Classification of International Standard | 49.140 | | Word Count Estimation | 26,216 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Regulation (derived from) | National Standard Announcement 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35203-2017: Space product general test documentation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Space product general test documentation
ICS 49.140
V01
National Standards of People's Republic of China
Aerospace products, general test files
(ISO 17566.2011, Spacesystems-Generaltestdocumentation, MOD)
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses redrafted Law Amendment uses ISO 17566.2011 "space system common test documents."
This standard and ISO 17566.2011 compared to the existence of technical differences, the provisions of these differences have been passed in the outer margin of the page margin
Set the vertical single (|) were marked in Appendix A is given a list of the corresponding technical differences and their causes.
This standard also made the following editorial changes.
--- Added information Appendix A, gives the standard and ISO 17566.2011 technical differences and their causes.
This standard proposed by China Aerospace Science and Technology Corporation.
This standard by the National Aerospace Technology and Standardization Technical Committee (SAC/TC425) centralized.
This standard was drafted by China Aerospace Standardization Institute, Beijing Institute of Satellite Environmental Engineering.
The main drafters of this standard. Huo Yuqian, Han Xiaojian, to the tree red, Lu Jing, Ren Wei.
Introduction
This standard provides the aerospace system, subsystems or stand-alone in a test, the minimum requirements for the preparation of test documents. To simplify and standardize the test
The preparation of inspection documents, the standard gives the main content of the test documents and templates.
This standard contains four types of test documents.
---Test program;
--- Test program;
--- Test procedures;
---experiment report.
Although the above documents are independent in terms of their functions, their contents are cross-linked and can be appropriately merged according to the type and complexity of tests.
For example, for medium-complex tests, the test program and test protocol can be combined into a single file; for a very simple test,
Gang, test program and test procedures into a single document. Chapter 4 gives the merger of documents under different circumstances.
Aerospace products, general test files
1 Scope
This standard specifies the basic requirements for the preparation of test documents in the aerospace products to carry out a specific test, including the test program, test side
Case, test procedures and test reports and other four types of general documents.
This standard applies to aerospace systems, subsystems and stand-alone test of a specific document preparation.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Analysis
Validation methods using well-established techniques for theoretical estimation.
These techniques include mathematical, statistical, qualitative design analysis, modeling and computer simulation.
2.2
Characteristic
Distinct features.
2.3
Objective evidence objectiveevidence
Data that supports the existence or authenticity of things.
2.4
Procedure
The path specified for carrying out an activity or process.
2.5
Process process
A set of interrelated or interacting activities that translate input into output.
2.6
Requirement
Necessary or desirable, usually implied or required.
2.7
Test test
Follow the procedure to determine one or more characteristics.
2.8
Verification
Confirmation that the requirement has been satisfied by providing objective evidence.
3 file description
3.1 Test Outline
The test program is the required test document for specifying the test object. For details, please refer to Appendix B. The test program mainly includes
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35203-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 35203-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35203-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35203-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|