|
US$1789.00 · In stock
Delivery: <= 13 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3478.8-2008: Straight cylindrical involute splines - Metric module, side fit. 45-degreepressure angle M and W values
Status: Valid GB/T 3478.8: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3478.8-2008 | English | 1789 |
Add to Cart
|
13 days [Need to translate]
|
Straight cylindrical involute splines - Metric module, side fit. 45-degreepressure angle M and W values
| Valid |
GB/T 3478.8-2008
|
| GB/T 3478.8-1995 | English | RFQ |
ASK
|
14 days [Need to translate]
|
Straight cylindrical involute splines 45 Degree pressure angle-- M and W values
| Obsolete |
GB/T 3478.8-1995
|
PDF similar to GB/T 3478.8-2008
Basic data | Standard ID | GB/T 3478.8-2008 (GB/T3478.8-2008) | | Description (Translated English) | Straight cylindrical involute splines - Metric module, side fit. 45-degreepressure angle M and W values | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J18 | | Classification of International Standard | 21.120.30 | | Word Count Estimation | 81,842 | | Date of Issue | 2008-09-22 | | Date of Implementation | 2009-05-01 | | Older Standard (superseded by this standard) | GB/T 3478.8-1995 | | Quoted Standard | GB/T 321; GB/T 3478.1 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.16 (Total No.129) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the pressure angle of 45 �� Straight cylindrical involute splines M value (bar spacing MRi, cross bar from MRe) and W values ??(average external splines normal line length) is calculated and limits the size of the table. This section applies to both GB/T 3478. 1 design and manufacture of pressure angle of 45 �� involute splines. | GB/T 3478.8-2008: Straight cylindrical involute splines - Metric module, side fit. 45-degreepressure angle M and W values
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Straight cylindrical involute splines.Metric module, side fit.45-degreepressure angle M and W values
ICS 21.120.30
J18
National Standards of People's Republic of China
Replacing GB/T 3478.8-1995
Straight cylindrical involute splines
(Metric series of teeth with the side)
Part 8. 45 ° pressure angle M and W values
2008-09-22 released
2009-05-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Foreword
GB/T 3478 "cylindrical straight teeth involute spline (metric series of teeth with the side)" is divided into nine parts.
- Part 1. General;
- Part 2. 30 ° pressure angle dimension table;
- Part 3. 37.5 ° pressure angle dimension table;
- Part 4. 45 ° pressure angle dimension table;
- Part 5. Inspection;
- Part 6. 30 ° pressure angle M and W;
- Part 7. 37.5 ° Pressure angle M and W;
- Part 8. 45 ° pressure angle M and W;
Part 9. Measuring rods.
This part is part 8 of GB/T 3478.
This part refers to ISO 4156-2..2005 "Cylindrical Straight Tooth Spline Spline (Metric Modulus Tooth Side) Part 2. Dimensions"
About 45 ° pressure angle M value and W value, is the GB/T 3478.8-1995 "cylindrical straight teeth involute spline 45 ° pressure angle M value and
W value "revision.
The main differences between this part and GB/T 3478.8-1995 are as follows.
--- standard name from the "cylindrical straight teeth involute spline 45 ° pressure angle M value and W value" to "cylindrical straight involute spline (m
Modular tooth side mating) Part 8. 45 ° pressure angle M value and W value ";
--- modified the original standard of the error, according to GB/T 1.1 made editorial changes.
This part of the national machinery shaft and accessories standardization technical committee put forward and centralized.
This part of the drafting unit. in the machine productivity promotion center, Harbin Dongan engine manufacturing company, Shijiazhuang sprocket factory, China second
Machinery Group Corporation, Taiyuan Heavy Industry Co., Ltd.
This part of the main drafters. Ming Cui new, often treasure India, Xu Wenjiang, Tan Ren Wan, Wang Xiaoling, Deng Gao see.
This part of the previous version of the standard to replace the release of the situation.
--- GB/T 3478.8-1995.
Straight cylindrical involute splines
(Metric series of teeth with the side)
Part 8. 45 ° pressure angle M and W values
1 Scope
This part of GB/T 3478 specifies the M value of the involute spline of the cylindrical straight teeth with a pressure angle of 45 ° (rod spacing MRi,
MRe) and W value (the average length of the spline normal line) and the limit size table.
This part is applicable to involute splines with a pressure angle of 45 ° designed and manufactured according to GB/T 3478.1.
2 normative reference documents
The terms of this document are the terms of this part by reference to this part of GB/T 3478. Any reference to the date of the text
, All subsequent amendments (excluding corrigenda) or revisions do not apply to this part, however, encouragement under this section
The parties to the agreement study whether the latest versions of these files are available. For undated references, the latest edition of this document applies
section.
GB/T 321 priority and priority series
GB/T 3478.1 Cylindrical straight teeth involute splines (metric series of teeth with side) Part 1. General (GB/T 3478.1-
2008, ISO 4156-1..2005, MOD)
3 bar measurement of the size of the formula
Note. Allow the corresponding steel ball instead of the bar.
3.1 The formula for measuring the size of the measuring bar at the time of involute opening
Figure 1
D'Ri = Db [tanαci-tan (αci-EmaxD + invαci-inv45 °
)] (1)
Where.
D'Ri - the calculated diameter of the bar;
Αci - the pressure angle on the spline and the rod contact point, expressed in radians, αci = cos-1
Db
Dci
Dci --- internal spline and measuring rod at the point of contact diameter.
Dci = Deemax + Dimin2
Deemax --- the maximum size of the external spline;
Dimin --- minimum value of internal spline trails;
Emax --- the actual maximum cogging width, the table by the tolerance level of 7 values.
Invαci = tanαci-αci;
Inv45 ° = 0.2146018.
The rod diameter DRi is selected according to R40 in GB/T 321. If D'Ri is not the R40 series value, it should be selected to be the closest to D'Ri
The value.
Figure 2
Even teeth.
MRimax = Dbcosαimax-
DRi (2)
MRimin = Dbcosαimin-
DRi (3)
Odd teeth.
MRimax = Dbcosαimax ×
Cos90 ° z-DRi
(4)
MRimin = Dbcosαimin ×
Cos90 ° z-DRi
(5)
Where.
MRimax --- the maximum value of the spline bar spacing;
MRimin - the minimum value of the spline bar spacing;
Αimax --- When E is Emax, the internal pressure on the center circle of the pressure bar.
Invαimax =
Emax
D + inv45 ° -
DRi
Db
Αimin --- When E is Emin, the internal pressure on the center circle of the internal pressure bar.
Invαimin =
Emin
D + inv45 ° -
DRi
Db
DRi - internal spline bar diameter.
3.2 Calculation formula of measuring the size of the bar when the spline tooth is straight
Figure 3
D'Ri = D [sin45 ° -cos45 ° × tan (45 ° -EmaxD
)] (6)
Figure 4
Even teeth.
MRimax =
Dsin (βs2 +
Emax
) -DRi
Sinβs2
-DRi (7)
MRimin =
Dsin (βs2 +
Emin
) -DRi
Sinβs2
-DRi (8)
Odd teeth.
MRimax =
Dsin (βs2 +
Emax
) -DRi
Sinβs2
× cos90 ° z-DRi
(9)
MRimin =
Dsin (βs2 +
Emin
) -DRi
Sinβs2
× cos90 ° z-DRi
(10)
Where.
Βs is the cogging angle, βs = 90 ° -
180 °
3.3 Calculation formula for measuring the size of external spline bar
Figure 5
D'Re = Db [tan (αce + invαce + π z -
Smin
D -inv45 °
) -tanαce] (11)
Where.
Αce - the pressure angle on the outer spline and the rod contact point, expressed in radians, αce = cos-1
Db
Dce
Dce --- outside the splines and measuring rods at the point of contact.
Dce =
Deemax + Dimin
Smin --- the actual minimum tooth thickness, the table by tolerance level 7 and the basic deviation of h value.
Invαce = tanαce-αce.
The rod diameter DRe is selected according to R40 in GB/T 321. If D'Re is not the R40 series value, it should be selected to be closest to D'Re
The value.
Figure 6
Even teeth.
MRemin = Dbcosαemin +
DRe (12)
MRemax = Dbcosαemax +
DRe (13)
Odd teeth.
MRemin = Dbcosαemin ×
Cos90 ° z + DRe
(14)
MRemax = Dbcosαemax ×
Cos90 ° z + DRe
(15)
Where.
MRemin - the minimum value of the spline span of the spline;
MRemax - the maximum value of the spline span between the outer splines;
Αemin --- When S is Smin, the pressure angle on the center circle of the external spline bar.
Invαemin =
DRe
Db + inv45 ° +
Smin
D -
Αemax - when S is Smax, the pressure angle on the center circle of the external spline bar.
Invαemax =
DRe
Db + inv45 ° +
Smax
D -
DRe - outside the spline with the diameter of the rod.
4 The formula for the average length W of the male and female splines (see Figure 7)
Figure 7
Wmax = Wmin + Tcos45 = Wmin + 0.707T (17)
Where.
Wmin --- the average length of the common line of the minimum;
Wmax --- the maximum length of the average length of the common law;
K - number of teeth, K = 0.25 z + 0.5 (take integer);
(T + λ) --- total tolerance;
T --- processing tolerances;
Esv --- the role of tooth thickness on the deviation.
5 bar measurement size
5.1 The spline teeth are involute for measuring the size of the bar as follows.
Modulus of 0.25mm ~ 2.5mm, the number of teeth 10 to 100, the tolerance level of 4 to 7, the basic deviation of the amount of h h key measurement
Rod diameter DRi, rod maximum distance MRimax and minimum value MRimin see Table 1 to Table 9.
5.2 The internal spline teeth are measured in straight line with the diameter of the rod diameter DRi, the maximum rod distance MRimax and the minimum value MRimin, see Table 10 to Table 18.
5.3 The measuring bar of the external spline is as follows.
5.3.1 External spline measurement with modulus of 0.25mm ~ 2.5mm, number of teeth 10 ~ 100, tolerance level of 4 ~ 7, basic deviation h
The diameter of the rod diameter DRe, the minimum value of the span between the MRemin and the maximum value MRemax see Table 19 to Table 27.
5.3.2 When the basic deviation of the spline is not h, the span distance shall be calculated according to the formula listed in 3.3.2 or calculated as follows
After the difference ΔMRe, the span value in the table is corrected.
ΔMRe = Ke · esv (18)
Where.
Ke --- transform coefficients, see Table 19 to Table 27.
5.4 The rod diameter DRi and DRe listed in Tables 1 to 27 are determined in accordance with 3.1.1 and 3.2.1 and 3.3.1. If necessary, on the bar
Make a plane to avoid contact with the spline trails.
5.5 When the actual diameter of the rod is different from the diameter listed in the standard, the maximum value of the spline bar spacing MRimax and the minimum value
MRimin, the minimum value of the spline span distance MRemin and the maximum value MRemax, should be calculated according to the actual rod diameter.
6 km normal length W limit value
6.1 Modulus 0.25mm ~ 2.5mm, the number of teeth 10 ~ 100, the tolerance level is 4 ~ 7, the basic deviation of h outside the spline common to the average
Length W limit, see Table 28 to Table 36.
6.2 When the basic deviation of the external spline tooth thickness is not h, the difference ΔW of the average length of its common line is calculated as follows.
ΔW = esv · cos 45 ° = 0.707esv (19)
Number of teeth
Measuring rods
diameter
DRi
Emin and Emax Rod Distance MRi
4H 5H 6H 7H
Min max min max min max min max
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
1.376
1.617
1.900
2.137
2.412
2.649
2.920
3.077
3.346
3.584
3.851
4.090
4.355
4.594
4.858
5.098
5.361
5.499
5.760
6.002
6.263
6.505
6.765
7.007
7.266
7.509
7.768
8.011
8.269
8.512
8.770
9.014
9.271
9.515
9.772
10.016
10.273
10.517
10.774
11.018
11.275
11.519
11.776
12.020
12.276
12.521
1.391
1.631
1.913
2.149
2.425
2.661
2.932
3.089
3.358
3.596
3.863
4.102
4.367
4.606
4.870
5.110
5.372
5.510
5.772
6.013
6.274
6.516
6.776
7.018
7.278
7.520
7.779
8.022
8.281
8.524
8.782
9.025
9.283
9.527
9.784
10.028
10.285
10.529
10.786
11.030
11.286
11.531
11.787
12.032
12.288
12.533
1.383
1.624
1.906
2.143
2.418
2.654
2.926
3.083
3.352
3.590
3.857
4.096
4.361
4.600
4.864
5.104
5.366
5.504
5.766
6.008
6.269
6.510
6.771
7.013
7.272
7.515
7.774
8.017
8.275
8.518
8.776
9.020
9.277
9.521
9.778
10.022
10.279
10.523
10.780
11.025
11.281
11.526
11.782
12.026
12.282
12.527
1.408
1.647
1.928
2.164
2.439
2.675
2.946
3.103
3.372
3.610
3.877
4.116
4.381
4.620
4.884
5.124
5.386
5.525
5.787
6.028
6.289
6.531
6.791
7.033
7.293
7.535
7.794
8.037
8.295
8.539
8.797
9.040
9.298
9.541
9.799
10.043
10.300
10.544
10.801
11.045
11.301
11.546
11.802
12.047
12.303
12.548
1.393
1.633
1.915
2.152
2.427
2.663
2.934
3.091
3.360
3.598
3.865
4.104
4.369
4.608
4.872
5.112
5.375
5.513
5.775
6.016
6.277
6.519
6.779
7.021
7.281
7.523
7.782
8.025
8.284
8.527
8.785
9.028
9.286
9.530
9.787
10.031
10.288
10.532
10.789
11.033
11.290
11.534
11.790
12.035
12.291
12.536
1.434
1.670
1.951
2.186
2.461
2.697
2.968
3.125
3.394
3.632
3.899
4.137
4.402
4.641
4.905
5.145
5.408
5.546
5.808
6.050
6.311
6.552
6.813
7.055
7.314
7.557
7.816
8.059
8.317
8.560
8.819
9.062
9.320
9.564
9.821
10.065
10.322
10.566
10.823
11.067
11.324
11.568
11.825
12.069
12.325
12.570
1.410
1.649
1.930
2.166
2.441
2.677
2.948
3.105
3.374
3.612
3.879
4.117
4.382
4.622
4.885
5.125
5.388
5.526
5.788
6.030
6.291
6.532
6.793
7.035
7.294
7.537
7.796
8.039
8.297
8.540
8.799
9.042
9.300
9.543
9.801
10.045
10.302
10.546
10.803
11.047
11.304
11.548
11.804
12.049
12.305
12.550
1.474
1.708
1.988
2.222
2.497
2.732
3.003
3.161
3.430
3.667
3.934
4.172
4.437
4.677
4.940
5.180
5.443
5.582
5.844
6.085
6.346
6.588
6.849
7.091
7.350
7.593
7.852
8.095
8.354
8.597
8.855
9.099
9.356
9.600
9.858
10.102
10.359
10.603
10.860
11.104
11.361
11.606
11.862
12.107
12.363
12.608
Table 1 (continued) The unit is in millimeters
Number of teeth
Measuring rods
diameter
DRi
Emin and Emax Rod Distance MRi
4H 5H 6H 7H
Min max min max min max min max
0.67
0.67
0.67
0.67
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
12.777
13.022
13.277
13.523
13.679
13.924
14.179
14.425
14.680
14.926
15.180
15.426
15.681
15.927
16.181
16.427
16.682
16.928
17.182
17.428
17.683
17.929
18.183
18.429
18.683
18.930
19.184
19.430
19.684
19.931
20.184
20.431
20.685
20.931
21.185
21.432
21.685
21.932
22.186
22.433
22.686
22.933
23.186
23.433
23.686
12.788
13.033
13.289
13.534
13.690
13.936
14.191
14.437
14.692
14.937
15.192
15.438
15.693
15.938
16.193
16.439
16.693
16.940
17.194
17.440
17.694
17.941
18.195
18.441
18.695
18.941
19.195
19.442
19.696
19.942
20.196
20.443
20.696
20.943
21.197
21.443
21.697
21.944
22.197
22.444
22.697
22.944
23.198
23.445
23.698
12.783
13.028
13.284
13.529
13.685
13.931
14.186
14.431
14.686
14.932
15.187
15.433
15.687
15.933
16.188
16.434
16.688
16.934
17.189
17.435
17.689
17.936
18.190
18.436
18.690
18.937
19.190
19.437
19.691
19.937
20.191
20.438
20.691
20.938
21.192
21.439
21.692
21.939
22.192
22.439
22.693
22.940
23.193
23.440
23.693
12.803
13.049
13.304
13.549
13.706
13.951
14.206
14.452
14.707
14.953
15.208
15.453
15.708
15.954
16.209
16.455
16.709
16.955
17.210
17.456
17.710
17.956
18.210
18.457
18.711
18.957
19.211
19.458
19.712
19.958
20.212
20.459
20.712
20.959
21.213
21.460
21.713
21.960
22.213
22.460
22.714
22.961
23.214
23.461
23.714
12.792
13.037
13.292
13.538
13.694
13.939
14.195
14.440
14.695
14.941
15.196
15.442
15.696
15.942
16.197
16.443
16.698
16.944
17.198
17.444
17.698
17.945
18.199
18.445
18.699
18.946
19.200
19.446
19.700
19.947
20.201
20.447
20.701
20.948
21.201
21.448
21.702
21.949
22.202
22.449
22.702
22.950
23.203
23.450
23.703
12.826
13.071
13.327
13.572
13.729
13.974
14.229
14.475
14.730
14.976
15.231
15.477
15.731
15.977
16.232
16.478
16.733
16.979
17.233
17.479
17.734
17.980
18.234
18.481
18.735
18.981
19.235
19.482
19.736
19.982
20.236
20.483
20.736
20.983
21.237
21.484
21.737
21.984
22.238
22.485
22.738
22.985
23.238
23.486
23.739
12.806
13.051
13.307
13.552
13.708
13.954
14.209
14.455
14.710
14.956
15.210
15.456
15.711
15.957
16.212
16.458
16.712
16.958
17.213
17.459
17.713
17.960
18.214
18.460
18.714
18.961
19.215
19.461
19.715
19.962
20.216
20.463
20.716
20.963
21.217
21.464
21.717
21.964
22.218
22.465
22.718
22.965
23.218
23.465
23.719
12.864
13.109
13.365
13.610
13.767
14.012
14.268
14.513
14.768
15.014
15.269
15.515
15.770
16.016
16.271
16.517
16.771
17.018
17.272
17.519
17.773
18.019
18.274
18.520
18.774
19.021
19.275
19.521
19.775
20.022
20.276
20.523
20.777
21.023
21.277
21.524
21.778
22.025
22.278
22.525
22.779
23.026
23.279
23.526
23.780
Number of teeth
Measuring rods
diameter
DRi
Emin and Emax Rod Distance MRi
4H 5H 6H 7H
Min max min max min max min max
1.12
1.12
1.12
1.12
1.12
1.12
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
2.986
3.456
4.015
4.483
5.031
5.501
5.883
6.356
6.893
7.368
7.901
8.377
8.906
9.384
9.911
10.390
10.915
11.217
11.741
12.223
12.744
13.227
13.747
14.231
14.750
15.234
15.752
16.237
16.754
17.240
17.756
18.242
18.757
19.244
19.759
20.246
20.760
21.248
21.761
22.250
22.762
23.251
23.763
24.253
24.764
25.254
3.004
3.473
4.032
4.499
5.048
5.517
5.900
6.372
6.909
7.384
7.917
8.393
8.922
9.400
9.927
10.406
10.930
11.233
11.756
12.238
12.760
13.242
13.763
14.246
14.765
15.250
15.767
16.253
16.769
17.255
17.771
18.258
18.773
19.260
19.774
20.262
20.775
21.263
21.777
22.265
22.778
23.267
23.779
24.268
24.780
25.269
2.993
3.462
4.021
4.489
5.038
5.507
5.889
6.363
6.900
7.374
7.907
8.383
8.913
9.391
9.917
10.397
10.921
11.224
11.747
12.229
12.751
13.234
13.754
14.237
14.756
15.241
15.759
16.244
16.761
17.247
17.762
18.249
18.764
19.251
19.766
20.253
20.767
21.255
21.768
22.257
22.770
23.259
23.771
24.260
24.772
25.261
3.024
3.492
4.050
4.518
5.066
5.535
5.918
6.390
6.927
7.402
7.934
8.410
8.940
9.418
9.944
10.423
10.948
11.251
11.774
12.256
12.778
13.261
13.781
14.264
14.783
15.268
15.786
16.271
16.788
17.274
17.789
18.276
18.791
19.278
19.793
20.280
20.794
21.282
21.795
22.284
22.797
23.285
23.798
24.287
24.799
25.288
3.003
3.472
4.031
4.498
5.047
5.516
5.899
6.372
6.909
7.383
7.916
8.392
8.922
9.400
9.927
10.406
10.931
11.233
11.756
12.239
12.760
13.243
13.763
14.247
14.766
15.250
15.768
16.253
16.770
17.256
17.772
18.259
18.774
19.261
19.776
20.263
20.777
21.265
21.778
22.267
22.780
23.269
23.781
24.270
24.782
25.272
3.054
3.520
4.078
4.544
5.092
5.561
5.945
6.417
6.954
7.428
7.961
8.437
8.967
9.444
9.971
10.450
10.975
11.278
11.801
12.283
12.805
13.288
13.808
14.292
14.811
15.295
15.813
16.298
16.815
17.301
17.817
18.304
18.819
19.306
19.820
20.308
20.822
21.310
21.823
22.312
22.825
23.314
23.826
24.315
24.827
25.317
3.020
3.488
4.046
4.513
5.062
5.531
5.914
6.387
6.924
7.398
7.931
8.407
8.937
9.414
9.941
10.421
10.945
11.248
11.772
12.254
12.775
13.258
13.778
14.262
14.781
15.266
15.784
16.269
16.786
17.272
17.788
18.274
18.790
19.277
19.791
20.279
20.793
21.281
21.794
22.283
22.796
23.285
23.797
24.287
24.798
25.288
3.102
3.566
4.123
4.589
5.137
5.605
5.989
6.461
6.998
7.472
8.005
8.481
9.011
9.488
10.015
10.494
11.019
11.323
11.846
12.328
12.850
13.333
13.853
14.337
14.856
15.340
15.858
16.344
16.861
17.347
17.863
18.350
18.865
19.352
19.867
20.354
20.868
21.357
21.870
22.359
22.872
23.361
23.873
24.362
24.874
25.364
Table 2 (continued) Units in millimeters
Number of teeth
Measuring rods
diameter
DRi
Emin and Emax Rod Distance MRi
4H 5H 6H 7H
Min max min max min max min max
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
25.765
26.255
26.766
27.257
27.767
28.258
28.768
29.259
29.768
30.260
30.597
31.088
31.597
32.089
32.598
33.090
33.599
34.091
34.600
35.092
35.600
36.093
36.601
37.093
37.601
38.094
38.602
39.095
39.602
40.096
40.603
41.096
41.603
42.097
42.604
43.097
43.604
44.098
44.605
45.099
45.605
46.099
46.605
47.100
47.606
25.781
26.271
26.781
27.272
27.782
28.273
28.783
29.274
29.784
30.275
30.612
31.103
31.613
32.104
32.613
33.105
33.614
34.106
34.615
35.107
35.615
36.108
36.616
37.109
37.616
38.109
38.617
39.110
39.617
40.111
40.618
41.111
41.618
42.112
42.619
43.112
43.619
44.113
44.620
45.114
45.620
46.114
46.620
47.115
47.621
25.773
26.263
26.774
27.264
27.774
28.265
28.775
29.266
29.776
30.267
30.604
31.096
31.605
32.097
32.606
33.098
33.607
34.099
34.607
35.100
35.608
36.101
36.609
37.101
37.609
38.102
38.610
39.103
39.610
40.104
40.611
41.104
41.612
42.105
42.612
43.106
43.613
44.106
44.613
45.107
45.614
46.108
46.614
47.108
47.614
25.800
26.290
26.801
27.291
27.801
28.292
28.802
29.293
29.803
30.294
30.631
31.123
31.632
32.124
32.633
33.125
33.634
34.126
34.634
35.127
35.635
36.128
36.636
37.128
37.636
38.129
38.637
39.130
39.638
40.131
40.638
41.131
41.639
42.132
42.639
43.133
43.640
44.133
44.640
45.134
45.641
46.135
46.641
47.135
47.641
25.783
26.273
26.784
27.274
27.785
28.276
28.786
29.277
29.787
30.278
30.615
31.107
31.616
32.108
32.617
33.109
33.618
34.110
34.618
35.111
35.619
36.112
36.620
37.113
37.621
38.114
38.621
39.114
39.622
40.115
40.623
41.116
41.623
42.117
42.624
43.117
43.624
44.118
44.625
45.119
45.625
46.119
46.626
47.120
47.626
25.828
26.318
26.829
27.320
27.830
28.321
28.831
29.322
29.832
30.323
30.661
31.152
31.662
32.153
32.662
33.154
33.663
34.156
34.664
35.157
35.665
36.157
36.666
37.158
37.666
38.159
38.667
39.160
39.668
40.161
40.668
41.162
41.669
42.163
42.670
43.163
43.670
44.164
44.671
45.165
45.671
46.165
46.672
47.166
47.672
25.799
26.290
26.801
27.291
27.802
28.292
28.803
29.294
29.804
30.295
30.632
31.124
31.633
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3478.8-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 3478.8-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 9 ~ 13 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3478.8-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3478.8-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3478.8-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3478.8-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|