|
US$839.00 · In stock Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 34454-2017: Dry cleaning robots for household use -- Methods of measuring performance Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34454-2017 | English | 839 |
Add to Cart
|
7 days [Need to translate]
|
Dry cleaning robots for household use -- Methods of measuring performance
| Valid |
GB/T 34454-2017
|
PDF similar to GB/T 34454-2017
Basic data | Standard ID | GB/T 34454-2017 (GB/T34454-2017) | | Description (Translated English) | Dry cleaning robots for household use -- Methods of measuring performance | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y62 | | Classification of International Standard | 97.080 | | Word Count Estimation | 42,452 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-05-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
GB/T 34454-2017: Dry cleaning robots for household use -- Methods of measuring performance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dry cleaning robots for household use - Methods of measuring performance
ICS 97.080
Y62
National Standards of People's Republic of China
Household dry cleaning robot performance testing methods
(IEC 62929.2014, Cleaningrobots forhouseholduse-
Drycleaning. Methods of measuring performance, IDT)
2017-10-14 Published
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 test the general conditions 2
4.1 Environmental conditions 2
4.2 light conditions 2
4.3 Test Equipment and Materials 3
4.4 The number of samples 3
4.5 Preheating the robot 3
4.6 Battery Preparation 3
4.7 Robot work 3
4.8 dust collector weight measurement 3
4.9 Measurement resolution and accuracy 3
4.10 dimensional tolerance 4
5 dust test - rectangular frame dust 4
5.1 General Requirements 4
5.2 hard floor dust removal 5
5.3 carpet dust removal 8
6 dust test - linear dust removal 10
6.1 General requirements 10
6.2 Test mode 10
6.3 hard floor dust removal 11
6.4 carpet dust removal 14
7 coverage test 15
7.1 General requirements 15
7.2 test bench 15
7.3 Pre-test preparation
7.4 Test Methods 26
7.5 Performance Measurement 27
8 average robot speed 29
8.1 Test Bench 29
8.2 Preparation before testing 30
8.3 Test Method 30
8.4 Calculation of Average Speed 31
9 Instructions for use 31
Appendix A (Informative) Calculation of Coverage 32
Appendix B (informative) Integrated cleaning performance indicators 34
References 35
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method identical with IEC 62929.2014 "Household cleaning robot dry. Performance testing methods."
The documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows.
--- GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance (eqvISO 2768-1.1989)
--- GB/T 17671-1999 cement mortar strength test method (ISO method) (ISO 679.1989, IDT)
This standard made the following editorial changes.
--- The standard name changed to "household dry cleaning robot performance testing methods."
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard proposed by the China Light Industry Federation.
This standard by the National Standardization Technical Committee appliances (SAC/TC46) centralized.
This standard was drafted unit. Cobos Robot Co., Ltd., Jiangsu United States clean Electric Co., Ltd., Shenzhen Silver Star Intelligent Technology
Co., Ltd., China Household Electrical Appliances Research Institute, Shenzhen Hua Measurement Technology Co., Ltd., Bo Xihua Electric (Jiangsu) Co., Ltd.,
Shanghai Flying Branch Electric Co., Ltd., Suzhou Green Detection Technology Co., Ltd., Suzhou Exit Inspection and Quarantine, Chongqing University of Posts and Telecommunications, Western Communications
University of Liverpool, Robotics Research Center, Zhejiang University.
The main drafters of this standard. Luo Xue Gang, Zhou Lei, Zhang Guodong, Wu Meng, Liu Zehua, Zhang Shurong, Ba Jinliang, Xiong Kaisheng, Tang red, Lin Yongyi,
Zhang Yi, Zhang Xuequn.
Introduction
In addition to the performance testing methods covered by this standard, there are several performance testing methods already under consideration. Already discussed but not yet
Write into the standard performance test items. Corner dust removal capabilities, noise, return to the charging seat, anti-drop, in addition to fiber capacity, dust and so on.
Test items that have been put on hold during the drafting of this standard will continue to be discussed and written into future versions.
Household dry cleaning robot performance testing methods
1 Scope
This standard specifies the basic performance of dry cleaning robot test methods.
This standard applies to dry cleaning robots used at home and similar conditions.
This standard does not involve safety and performance requirements.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Household vacuum cleaners - Part 1. Performance test methods for dry vacuum cleaners (IEC 60312-
1.2010, IDT)
ISO 554 conditioning and/or testing Standard atmosphere specification (Standardatmospheresforconditioningand ortes-
ting-Specifications)
ISO 679.2009 cement test methods Determination of strength (Cement-Testmethods-Determinationof
strength
ISO 2768-1-1989 General tolerances Part 1. Tolerances for linear and angular dimensions without tolerance (General
tolerances-Part 1.Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindica-
tions
3 Terms and definitions
GB/T 20291.1-2014 defined and the following terms and definitions apply to this document.
3.1
Cleaning robot cleaningrobot
Battery-powered automatic cleaner automaticbattery-poweredcleaners
In certain areas, automatic floor cleaning can work independently without any human intervention.
Note The cleaning robot consists of moving parts and possibly a charging stand and/or accessories for assisting work.
3.2
Dry cleaning robot drycleaningrobot
Cleaning robots used only to clean non-liquid substances on the floor without the aid of a liquid or a solution.
Note. Typical cleaning methods include vacuum, roller brush, rag and duster.
3.3
Cleaning head cleaninghead
The air inlet on the bottom of the robot.
NOTE The width of the cleaning head refers to the width of the air inlet in the direction of advancement of the appliance.
3.4
Agitation device agitationdevice
An electromechanical device or blower connected to the robot to aid in dust removal.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34454-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34454-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34454-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34454-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|