|
US$449.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33523.1-2020: Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33523.1-2020 | English | 449 |
Add to Cart
|
4 days [Need to translate]
|
Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture
| Valid |
GB/T 33523.1-2020
|
PDF similar to GB/T 33523.1-2020
Basic data | Standard ID | GB/T 33523.1-2020 (GB/T33523.1-2020) | | Description (Translated English) | Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 17.040.20 | | Word Count Estimation | 24,285 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Quoted Standard | GB/T 131-2006; GB/T 1182; GB/T 16901.1; GB/T 33523.2-2017; ISO 3098-2; 2000; ISO 14406; ISO 25178-3-2012; GB/T 24734.1; GB/T 24734.11; GB/T 24734.2; GB/T 24734.3; GB/T 24734.4; GB/T 24734.5; GB/T 24734.6; GB/T 24734.7; GB/T 24734.8; GB/T 24734.9; GB/T 247 | | Adopted Standard | ISO 25178-1-2016, MOD | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the rules for using graphic symbols to represent the surface structure of the area in product technical documents (such as drawings, specifications, contracts, and reports). Appendix A of this standard specifies the scale and size of graphical symbols; Appendix B specifies the markings for clear surface structure requirements; see Appendix C for examples of marking area surface structure requirements; refer to Appendix D for recommended procedures for indicating intersecting planes; area surface structure Refer to Appendix E for ISO special specification elements. This standard applies to the marking of the regional surface structure of the workpiece. | GB/T 33523.1-2020: Geometrical product specifications (GPS). Surface texture: Areal - Part 1: Indication of surface texture
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Product Geometric Technical Specification (GPS) Surface Structure Area Method Part 1: Representation of Surface Structure)
ICS 17:040:20
J04
National Standards of People's Republic of China
Product Geometric Specification (GPS) Surface Structure
Regional Law Part 1: Representation of Surface Structure
(ISO 25178-1:2016,MOD)
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Graphical symbols for marking area surface structure 1
5 Composition of complete graphic symbols for regional surface structure 3
6 Labeling of regional surface parameters 4
7 Coordinate system 7
8 Digital product definition data 7
Appendix A (Normative Appendix) Scale and Size of Graphic Symbols 9
Appendix B (Normative Appendix) Clarify the labeling of the surface structure regulations 11
Appendix C (informative appendix) Examples of surface structure requirements for marked areas 14
Appendix D (informative appendix) shows recommended procedures for intersecting planes 16
Appendix E (informative appendix) ISO special specification elements for area surface structure 18
Appendix F (Informative Appendix) Relationship with GPS Matrix Model 20
Reference 21
Foreword
GB/T 33523 "Geometric Technical Specifications for Products (GPS) Surface Structure Area Law" is divided into the following parts:
---Part 1: Representation of surface structure;
---Part 2: Terms, definitions and surface structure parameters;
---Part 3: Standardized Operation Set;
---Part 6: Classification of surface structure measurement methods;
---Part 70: Physical measurement standards;
---Part 71: Software measurement standards;
---Part 72: XML file format x3p;
---Part 73: Terms and definitions for measuring surface defects of materials;
--- Part 600: Metrological characteristics of the area topography measurement method;
--- Part 601: Nominal characteristics of contact (stylus) instruments;
---Part 602: Nominal characteristics of non-contact (confocal chromatic aberration probe) instruments;
---Part 603: Nominal characteristics of non-contact (phase-shifting interference microscope) instruments;
--- Part 604: Nominal characteristics of non-contact (coherent scanning interference) instruments;
---Part 605: Nominal characteristics of non-contact (spot autofocus) instruments;
---Part 606: Nominal characteristics of non-contact (zoom) instruments;
--- Part 607: Nominal characteristics of non-contact (confocal microscope) instruments;
---Part 701: Calibration and measurement standards for contact (stylus) instruments:
This part is Part 1 of GB/T 33523:
This section was drafted in accordance with the rules given in GB/T 1:1-2009:
This part uses the redrafting method to modify and adopt ISO 25178-1:2016 "Geometrical Technical Specifications for Products (GPS) Surface Structure Area
Law Part 1: Representation of Surface Structure:
Compared with ISO 25178-1:2016, this part has technical differences: The corresponding technical differences and their reasons are as follows:
---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments:
The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows:
● Replace ISO 1101 with GB/T 1182, which is modified to adopt international standards (see Chapter 3 and Chapter 8);
● Replace ISO 81714-1 (see Appendix A) with GB/T 16901:1 which is modified to adopt international standards;
● Replace ISO 16792 (see Chapter 3 and Chapter 8) with GB/T 24734 (all parts) that is not equivalent to international standards:
This section has made the following editorial changes:
---In the "Scope" chapter, add "Appendix A of this part gives the scale and size of graphic symbols; Appendix B gives a clear table
The marking of the surface structure requirements; see Appendix C for examples of the surface structure requirements of the marked area; refer to the recommended procedures for indicating intersecting planes
Appendix D; For the ISO special specification elements of the regional surface structure, please refer to Appendix E "This section applies to the regional surface structure of the workpiece
Mark":
This part is proposed and managed by the National Standardization Technical Committee for Product Geometric Technical Specifications (SAC/TC240):
Drafting organizations of this section: Harbin Institute of Technology, Xi'an Edward Measuring Equipment Co:, Ltd:, China Machinery Productivity Promotion Center, Central China
University of Science and Technology, Tsinghua University, Shandong University, Shaanxi Institute of Metrology, China Institute of Metrology:
The main drafters of this section: Liu Jian, Ming Cuixin, Song Jianzhong, Liu Xiaojun, Liu Chenguang, Wei Haoyun, Yan Peng, Liu Ying, Shi Yushu, Zhu Yue:
Product Geometric Specification (GPS) Surface Structure
Regional Law Part 1: Representation of Surface Structure
1 Scope
This part of GB/T 33523 specifies the use of graphical symbols to indicate areas in product technical documents (such as drawings, specifications, contracts, and reports):
The rules of the domain surface structure:
Appendix A of this part gives the proportions and dimensions of the graphic symbols; Appendix B gives the labels for clear surface structure regulations; the label area
See Appendix C for examples of domain surface structure requirements; refer to Appendix D for recommended procedures for indicating intersecting planes; ISO special regulations for area surface structures
See Appendix E for fan elements:
This section applies to the marking of the regional surface structure of the workpiece:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 131-2006 Product Geometric Technical Specification (GPS) Representation of surface structure in technical product documents (ISO 1302:
2002, IDT)
GB/T 1182 Geometric Technical Specification for Products (GPS) Geometric tolerance shape, direction, position and runout tolerance marking
(GB/T 1182-2018,ISO 1101:2017,MOD)
GB/T 16901:1 Graphical symbols for technical documents Part 1: Basic rules (GB/T 16901:1-2008,
ISO 81714-1:1999, MOD)
GB/T 24734 (all parts) Technical product documentation Digital product definition data general rules
GB/T 33523:2-2017 Geometric Technical Specifications for Products (GPS) Surface Structure Area Law Part 2: Terms, Definitions and Tables
Surface structure parameters (ISO 25178-2:2012, IDT)
ISO 3098-2:2000 Technical product document text Part 2: Latin letters, numbers and symbols (Technicalproduct
documentation-Lettering-Part 2:Latinalphabet,numeralsandmarks)
ISO 14406 Geometrical Product Specifications (GPS) Extraction [Geometrical productspecifications(GPS)-Extrac-
tion]
ISO 25178-3:2012 Product Geometric Technical Specification (GPS) Surface Structure: Regional Law Part 3: Specification Operation Set [Geo-
metricalproductspecifications(GPS)-Surfacetexture:Areal-Part 3:Specificationoperators]
3 Terms and definitions
The terms and definitions defined in GB/T 131, GB/T 1182, GB/T 24734 (all parts), ISO 14406 and ISO 25178-3 are applicable
Used in this document:
4 Graphical symbols for marking the surface structure of the area
The requirements for the surface structure in the product technical documents can be represented by different graphic symbols: Each graphic symbol has a specific meaning: Make
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33523.1-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 33523.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33523.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33523.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|