|
US$248.00 ยท In stock
Delivery: <= 1 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 335-2019: Non-self-indicating instrument
Status: Valid GB/T 335: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 335-2019 | English | 248 |
Add to Cart
|
1 days [Need to translate]
|
Non-self-indicating instrument
| Valid |
GB/T 335-2019
|
| GB/T 335-2002 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Non-self-indicating instrument
| Obsolete |
GB/T 335-2002
|
| GB/T 335-1985 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
TGT type beam counter poise platform scale
| Obsolete |
GB/T 335-1985
|
PDF similar to GB/T 335-2019
Basic data | Standard ID | GB/T 335-2019 (GB/T335-2019) | | Description (Translated English) | Non-self-indicating instrument | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A53 | | Classification of International Standard | 17.100 | | Word Count Estimation | 18,173 | | Date of Issue | 2019-12-31 | | Date of Implementation | 2020-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 335-2019: Non-self-indicating instrument---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-self-indicating instrument
ICS 17.100
A53
National Standards of People's Republic of China
Replaces GB/T 335-2002
Non-self-indicating scale
2019-12-31 release
2020-07-01 implementation
State Administration of Market Supervision
Published by the National Standardization Administration
Contents
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Product model 2
5 Measurement requirements 3
5.1 Accuracy Level 3
5.2 Verification scale value 3
5.3 Classification of scales 3
5.4 Maximum allowable error 3
5.5 Zero 4
5.6 Measuring leverage 4
5.7 Allowable error between weighing results 4
5.8 Sensitivity 4
5.9 Maximum safety load 5
5.10 Tilt 5
6 Technical requirements 5
6.1 Applicability 5
6.2 Deceptive use 5
6.3 Indication device 5
6.4 Structural requirements 6
6.5 Tare device 7
6.6 Support structure 7
7 Test method 7
7.1 Preparation before test 7
7.2 Weighing performance 8
8 Inspection rules 10
8.1 Factory inspection 10
8.2 Type inspection 11
9 Marking, packaging, transport and storage 11
9.1 Logo 11
9.2 Packaging 12
9.3 Transport 12
9.4 Storage 12
References 13
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 335-2002 `` Non-self-indicating scales ''. Compared with GB/T 335-2002, the main technical changes are as follows.
--- Removed the original OIML preface;
--- Added normative references (see Chapter 2);
--- Added some terms (see Chapter 3);
--- Change the original requirements to measurement requirements and technical requirements (see Chapters 5 and 6);
--- Re-specified the sensitivity according to OIMLR76 (see Chapter 5);
--- Increased the requirement that the scale should not be designed for tare devices (see Chapter 6);
--- Increased support structure requirements for scales (see Chapter 6);
--- Increased technical requirements for key components (see Chapter 6);
--- Deleted the zero return test item;
--- Removed the scale less than 1t, the requirement of repeatability test 10 times;
--- Considering that the mechanical lever is not sensitive to temperature effects, the temperature requirements have been removed;
--- The wording of the.2002 version of the standard has been optimized based on OIMLR76.
This standard adopts the redrafting method with reference to the international recommendations of the International Organization for Legal Metrology OIMLR76-1..2006 "Part 1 of Non-Automatic Weighing Apparatus"
Points. "Measurement and Technical Requirements Test" was compiled, and the degree of consistency with OIMLR76-1 was non-equivalent (NEQ).
Please note that some elements of this document may involve patents. The issuer of this document is not responsible for identifying these patents.
This standard is proposed by the China Light Industry Federation.
This standard is under the jurisdiction of the National Weighing Standardization Technical Committee (SAC/TC97).
This standard was drafted. Jinhua Dongfang Julong Weighing Apparatus Co., Ltd., Zhejiang Institute of Metrology, Shandong Jinzhong Technology Group Co., Ltd.
Co., Ltd., Jinan Metrology Testing and Testing Institute, Beijing Metrology and Testing Science Research Institute.
The main drafters of this standard. He Hongwei, Yu Songqing, Fan Shaochen, Cui Weidong, Chen Yimeng, Shang Xianping.
The previous versions of the standards replaced by this standard are.
--- GB/T 335-1985, GB/T 335-2002.
Non-self-indicating scale
1 Scope
This standard specifies the terms and definitions of non-self-indicating scales (hereinafter referred to as "scales"), product models, measurement requirements, technical requirements, test methods
Law, inspection rules, marking, packaging, transportation and storage.
This standard applies to the use of mechanical lever force transmission, through the movement of the roaming on the measuring scale and (or) increase and decrease the balance of the test object
The balance of the weight is determined by the swing of the measuring lever, so as to obtain the mechanical lever scale of the weighing indication.
Note. The mechanical lever scales referred to in this standard mainly include mechanical bench scales, case scales, floor scales and floor scales.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging, storage and transportation icon
GB/T 4167 weight
GB/T 6388 shipping packaging receipt and delivery mark
GB/T 14250-2008 Weighing terms
GB/T 23111-2008 non-automatic weighing instrument
GB/T 26389 Weighing product model compilation method
QB/T 1588.1 General technical requirements for welding parts of light industry machinery
QB/T 1588.2 General technical requirements for cutting parts of light industry machinery
QB/T 1588.3 General technical requirements for assembly of light industrial machinery
QB/T 1588.4 General technical conditions for light industrial machinery painting
3 terms and definitions
The terms and definitions defined in GB/T 14250-2008 and the following apply to this document. For ease of use, the following is repeated
Some terms and definitions in GB/T 14250-2008.
3.1
Non-automatic weighing instrument
Operators need to intervene in the weighing process to determine whether the weighing result is acceptable for the scale.
[GB/T 14250-2008, definition 3.3.4].
3.2
A scale that relies entirely on user operation to obtain a balanced position.
[GB/T 14250-2008, definition 3.3.10].
3.3
Beamscale
A collective term for all scales that use the leverage principle for weighing.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 335-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 335-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically in 24 hours. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 335-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 335-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 335-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 335-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|